How to tie a women's pullover with knitting needles? Schemes and description. Fashionable pullover for women

In order to bind a fashionable thing for yourself, you do not need encyclopedic knowledge and any unusual skills. Knitting is a fascinating process, interesting, but requiring perseverance and patience. Few women are able to spend so much time tying their loops. But what happiness it is then to put on a sweater tied by one's own hands and get compliments! Such things have the following advantages over purchased ones:

• The opportunity to save on the purchase of designer things. In the exclusivity of the received things you will not have to doubt, since no one in the world will not. A similar thing in the store will be very expensive, and hand-made performance will require only time, costs for yarn and knitting needles.
• You can make it so that the thing fits perfectly on the figure, even if it is not perfect. If you did not immediately get the required landing, you can dissolve the part and link it to the corrected parameters.
• The ability to use already existing threads, if suddenly they lie in a box from time immemorial.
• Possibility to get a thing of such composition that you want, but not that is available at a cost in the store.

What you need to start knitting

Before starting knitting you need to know the general concepts. It is not necessary to study textbooks or books on knitting, in which everything is very difficult to describe. Often the complexity of the description of the process repels novice masters.

In order to tie a women pullover with knitting needles, threads and knitting needles are required. If you want to tie the sweater warm and thick, then you need the appropriate thread. For knitting an elegant fishnet pullover, the necessary thin threads.

Calculation of yarn

Probably, to someone the process of calculation will seem difficult, but it is far not so. The simplest calculation, which is used by many knitters, is based on the length of the thread. This indicator is indicated on each glomerulus. For example, in order to tie a women's pullover with medium-sized spokes, 46 sizes, you need a kilometer of yarn. That is, if the skein is indicated that it is 250 meters, then it will take 4 of these machines. To increase the size or depending on the features of the model, add one additional skein of yarn. The same goes for decreasing. For example, if the model assumes a short sleeve, then you can buy yarn for one skein less.

And you can do it cunningly: take your sweater, which used similar threads, and weigh it on the scales. The resulting weight is the required amount of yarn. It is better to buy a spare gland when buying, because the colors in batches may differ, and if the yarn is not enough, then the new tangle may differ in shade.

Selection of knitting needles

The spokes are selected depending on the yarn. Usually on the glomeruli, manufacturers indicate which number should be taken to use this yarn. If you take the needles of the smallest mentioned number, then knitting will get denser. If you use large knitting needles, you will get a looser and more elastic fabric.

Very many knitters use this method: you need to put a piece of yarn and a spoke on the table. Their thickness should roughly coincide.

Sample

Before you tie the female pullover with knitting needles, you will need to tie the sample. Sewing the sample is necessary to calculate the required number of loops and evaluate the behavior of the yarn after washing. On the spokes a set of an arbitrary number of loops is made. Approximately should be the width of the sample at least 10 cm, so it was convenient to calculate how many loops in a given width is contained. Knit the sample you need the same knitting, which is planned to knit the future pullover. If the facial smooth surface is applied , then the sample also knits it. If you will use aura or aran, then it is enough to use one rapport of the pattern in the sample. After receiving a sample of a square shape, measurements are taken. The number of loops contained in 10 cm of mating is calculated, without taking into account the edge loops. The sample is then washed and dried. After drying, calculations and measurements are performed again. This is necessary in order to find out whether the yarn does not sit down after washing, otherwise after the finished product is bound and washed, it may not be enough for its owner.

Now you need to take off your measurements and determine the size. After this, you will need to make a pattern or a schematic image of it. You can find a pattern of pullover in the magazine. Now you can start knitting.

Inexperienced knitters are lucky, as the fashionable pullovers presented on the catwalks and in famous shops are connected by very simple knitting. The most fashionable models at the moment - a pullover with braids (the pattern of mating can be seen below) or bound by the front surface, as well as models with the simplest openwork pattern.

Female sweater with downcast shoulders free cut

For the initial experience, you can find in the magazine or the Internet a women's pullover (spokes) with a description to follow the instructions of all steps. And you can simplify your task. You can tie the easiest pullover with the women's spokes straight forward silhouette with your shoulders down. The knitting peculiarities of this pullover are that it does not require rounding for armholes and loosening the sleeve of the sleeve. Patterns for such a pullover look like simple rectangles.

The width of the product is calculated by measuring the line of the thighs, dividing it in half and adding a couple of centimeters to the allowances and pairs - to free fit. Now, based on the density of knitting, which is determined by untying the sample, the required number of loops is typed. Usually at the bottom of the product, an elastic band is made by tying the front and back loops alternately. It is necessary to ensure that the edge of the product does not stretch and does not curl upward. For such a product, yarn of sectional dyeing is suitable, as it creates a picturesque pattern on the product itself and does not require supplementation with additional details. Pullover mélangee female (it is not too difficult to bind it with knitting needles) is at the peak of fashion and uncomplicated in performance. Particularly suitable technology for knitting this model for beginners, because the errors are very easy to adjust.

Female sweater raglanom from below

Fashionable pullovers, connected with sleeves of the form of raglan, are also simple in execution and look quite impressive. You can tie this pullover with braids, different aranes or lace patterns. A female raglan pullover can be performed from the bottom by unscrewing each part separately to the axillary cavity. Then all the details are connected to one spoke and knit with one cloth in a circle with the use of special ragging on the seams.

The advantage of this method is that the pullover process is under constant control. If other models, for example, with the removal of the armhole, require accuracy, then the process of tying regna can be adjusted at its discretion. Losses on the regular lines are made in every second row. When the length of the product satisfies the specified project, you can finish the job. With this method of knitting, you can decorate the neck with an elastic band, a high collar, a stand, a yoke. There are a lot of options. After the closure of the neck line, the seams are sewn - the sleeves and the side seams.

So the women's pullover is ready with knitting needles. A scheme for such a model may not be necessary.

Female sweater raglan top

You can tie a women's pullover raglan on top, starting from the collar. The process is more complicated, since it requires the compilation of an initial complex calculation of the number of loops. But this method of knitting allows you to finish knitting in the place where the yarn ended, or when the length meets the needs of a knitter. In order to get a female pullover with knitting needles, the scheme can be found in a magazine or on the open spaces of the network. You can not deal with calculations, but take a finished sample, which will describe in detail how to knit a female pullover with knitting needles for beginners. Knitting begins with the collar. Then the germ grows. It is necessary for the neckline on the front of the pullover to be deeper than on the back. Further, after the distribution of the loops, knitting is performed similarly to railing from the bottom, but only at the seams in each second row are added the loops.

Openwork models of pullovers

In order to tie a female pullover with knitting needles , some skills will be required. Although knitting is complex and takes a lot of time, the delicate pullover turns out elegant, delicate and delicate. For knitting you will need to find in the magazine or on the Internet a female pullover with spokes describing. The circuit is necessary for tying a complex pattern, and the pattern can be made independently, following its dimensions. To tie a thin pullover with women's needles, you will need matching yarn. If the model is designed for summer, then cotton, linen or viscose yarn will be perfect. If the openwork pullover is intended for a colder time, then it is possible to take a thin coat, and acrylic, and even mohair. Their mohair will get a thin pullover with women's rather warm knitting needles, as the villi perfectly keep the heat.

The basic techniques that are used to knit openwork pullovers, this combination of capers, crossing the loops and untying several loops together. Nakid is performed by threading the thread on the spokes from the side of the inside of the product. In the next row, the napkin is usually tied with a back loop.

Model pullover with braids

The braids are a classic decoration of the sweater, because they easily get out and look spectacular. The scythe is knit quite simply. If the width of the braid is 6 loops, then when knitting, three loops are left on the auxiliary spoke, the next loops are loosened, and then left on the spoke. In this case, the auxiliary spoke can be located behind or in front of the work, depending on the direction of the braid weave. Typically, the diagram indicates where it is necessary to locate the auxiliary spoke.

Description of the pattern

1st row: 2 purl, 8 facial, 2 purl;

From the 2nd to the 4th row we knit how it looks viscous: over the face we sew the front ones, over the purlins - the purl loops.

5-th row: 2 purl, 4 loops peresnyat, not tying them, on the auxiliary spoke and leave ahead of work; Tie the next 4 loops to the front (at the beginning of their tying, try not to have a large broach between the loops). Then 4 loops from the auxiliary knitting needle are retouched to the left knitting needle and also we sew them with facial knitting needles. It turned out that the loops at us as if were crossed with a slope to the left.

From the 6 th to the 12 th row - we knit according to the drawing.

Then we knit, repeating from the 5th row. The result is this braid:

Pullovers with braids are warm and cozy. So usually decorate winter models.

Finishing of products

Finishing is very important in knitting, because it depends on it the final result. The product looks neat and tidy when properly selected. The quality of its performance depends on the time that the product will be used.

The joints can be joined with a needle or a hook. The needle connection involves laying the seam "back with a needle" along the edges of the product. And you can make connections by crocheting, sewing along the edges of the connected parts a seam from the half-shells. Get a neat pigtail, which will ensure a reliable connection of parts. Tails that remain after the set of loops are tucked into the seams of the product.

After the knitting is finished, the product should be moistened and put on a flat surface for complete drying. As a rule, after washing, the loops straighten and become more even and more neat. This is especially noticeable on a smooth monochrome yarn. It should be noted that yarn made of natural fibers can sit down if it is washed in too hot water. Typically, yarn manufacturers point to the tangle of care for it. It is best to wash the knits in warm, soapy water.

A ready-made knit article can be decorated at will. For example, very impressive look beads, beads, rhinestones. You can sew a patch of decorative elements around the edges, collar or cuffs. Whatever the decor is chosen, independent knitting involves complete freedom of choice, since this process is creative. The main thing is not to overdo it with jewelry, so that the pullover does not look like a Christmas tree.

Some knitters think that knitting is very difficult, and it takes too much time. Yes, it takes a lot of time. Sometimes with a pullover it is necessary to potter a few weeks, and even months. The more difficult the process and the longer the work, the more joy when the finished thing turns out.

But about the complexity of knitting - the process is quite controversial. Many knitters tend to commercialize their skills and deliberately complicate the process, so that frightened beginners necessarily bought this or that book. In fact, knitting is not a complicated process at all. If you really wanted a new thing, you do not need to doubt that it will work for you. It is better to try, and let not from the first, but from the second time from under the needles will be a masterpiece. Doubts in one's own powers can be stopped from the very beginning of actions. But if a person does not try to do something, then he can not know whether it is difficult or not.