Automobiles, Classic
How to remove stickers from the car glass?
Often when buying a car from the hands of the future owner is faced with the problem of removing the labels that were inflicted by the previous owner. It can be the emblem of any musical group, advertising information and so on. But the problem is further complicated by the fact that glue eventually literally gushes into the surface of the glass. In today's article, we'll talk about how to quickly remove the sticker from the glass in several ways.
Blade
Probably, each of us tried to peel off the film, hitting its edge with a fingernail. This is the safest option. But often the sticker dries so much that you can remove it literally with a layer of paint or glass.
Disposable razor
Before removing the sticker from the glass, it must be soaked in a strong substance. "To the dry" nothing can be done. The razor will only leave small scratches and will make the dismantling of the element even more time consuming. The method itself is less dangerous than the blade. After all, the razor does not have such bright projections. And in case of strong pressure it will not damage the glass. But the trouble is that the blade is quickly blunted. If you want to remove the sticker from the glass (how to do it - we'll consider later) large sizes, this method does not work. In addition, you need to consider the thickness of the label. If it is very thick, the razor will become dull after the first intake. Therefore, this method is useful only for small areas.
Water and vinyl
There is an opinion that the sticker can be washed off with water.
Hairdryer
This is the safest way to remove the sticker from the car's glass. Under the influence of hot air, the glue changes its properties. As a result, the vinyl part can be removed easily by poking it with your finger. For best effect, it is recommended to use a building hair dryer. But in the absence of such a home (just take more time). How do I remove the stickers from the glass? Everything is extremely simple. First you need to warm the surface for about five minutes. Try to process all edges of the sticker. Keep a short distance so as not to overheat the glass itself. If it is tinted on the back, take breaks. Because the film can simply melt. After the glue has become hot, gently pull the edge of the part with a fingernail or a plastic scraper.
If there is no hair dryer
In the absence of such a lamp can be used. The more its power, the better. But it is worth remembering that a powerful lamp (more than 200 watts) can melt the inside of the glass in case of toning applied. Therefore, as in the case of a hair dryer, we keep distance. How to remove a sticker from the car glass? Dismantling it is similar. First, we take the edge, and then without jerks, remove the element from the surface.
Finishing
Often, after removing the sticker on the surface remains shagreen. In no case do not remove it with a blade or other improvised means. In order to wash away the glue, you need to use a solvent. Excellent for this purpose is suitable "Antilysikon". It contains white spirit and other additives that instantly dissolve the old glue. The remedy is much more effective than vodka or gasoline. "Anti-silicone" should be applied to a soft rag and wipe the area of the glass. Please note that this is a potent remedy - when working it is important to use rubber gloves and a respirator. With regard to the removal of glue with paint, it is worth noting one point. The product can also remove the paint layer, if it was previously not applied at the factory. Therefore, first find out whether this body surface was painted up to you. At the factory LCP "anti-silicone" acts without consequences.
Polishing
At the end of the work, it is desirable to make light polishing. And in the case of glass - treat with a cleaner based on alcohol. Then you can start full-fledged operation. What is it for? The fact is that after removing stickers on the surface there are shadows. The vinyl surface takes over the entire impact of UV rays, while the rest of the PCB is exposed to negative factors.
Other methods
There are several more methods of how to remove stickers from the glass:
- Use a liquid to remove the wallpaper. Apply better on rags and wait until the product is completely soaked. With a rubber or plastic spatula (it is important that it is without sharp edges), remove the element.
- How to remove a sticker from the glass of the car? You can try using the VD-40. Then you need to wait until the remedy starts working, and start dismantling the film. Also this tool can be combined with a hair dryer - pre-soak the sticker, and then warm it to high temperatures. Remains of glue are removed with vinegar.
Conclusion
So, we found out how easy it is to remove the sticker from the glass. Of course, the best way is to use specialized tools for this. One of these is the Cleanextreme Aufkleber sticker remover. This tool can be bought for 1 thousand rubles. It is sold in the form of a sprayer. The preparation perfectly removes the adhesive layer. Thus, the sticker can be removed at a time, without loss and re-processing.
Similar articles
Trending Now