How to properly make a septic tank from the rings with your own hands?

Sewerage in a private home is a painful issue. The fact is that in the suburban areas there is often no centralized drainage system. However, there is a way out of this situation. For example, you can build a local sewer. If you want to build a septic tank from the rings with your own hands, you should first consider all the features of the process.

In principle, it is not difficult to build this structure. Collect the necessary material and tools: shovel, reinforced concrete rings, sealant, concrete, medium diameter pipes (better of plastic), insulation. Naturally, you should choose the right place for the construction of such a structure. The septic tank of the rings should be built by oneself in the place where the groundwater is deep, and there is no risk of filling the well with thawed water. Also, you do not need to construct a structure under the walls of the house. However, too far to build it, too, should not be, since the longer the length of the drain pipes, the slower the drains get into the well.

Begin the construction of sewage should be from excavation. The pit should have the same diameter as the ring. Make a septic tank from the rings with your own hands so that the drain pipes go under a slight slope towards the well. During the installation of the main elements, you will need help, since they have a decent weight, and you will not be able to lower them into the trench yourself. As for the number of round elements, it depends on the depth of the well. When calculating the size of the sewage system, one should take into account which daily water rate is used and the number of people in the family.

It is not difficult to build a septic tank from the rings. The construction scheme can also be drawn independently. It is important during work not to forget about the sealing of seams. This is done so that the contaminated runoff can not penetrate into the ground. For sealing use liquid glass, mixed with cement mortar.

The space that remains between the earthen and concrete walls should be covered with earth. In this way, you will strengthen the well. To better know how to arrange a septic tank from the rings with your own hands, for advice you can always contact a specialist.

To ensure that the rings are not destroyed under the constant influence of moisture, it is necessary to isolate them with the help of special means. Now you can proceed to compacting and concreting the bottom. To do this, build a sand cushion in which you can add a bit of small gravel or crushed stone. Naturally, the layer of material should be well compacted. Only after this you can make a concrete screed.

The presented sewage system should have ventilation and a hatch with a cover, which is often peppered with a small layer of earth. The pit can be closed with a concrete or metal plate.

Septics from reinforced concrete rings are erected quickly and serve for a long time. In addition, they are easy to clean. However, for the delivery and installation of the elements you will need a special technique, so the site must have an entrance. In addition, it should be possible to clean the well with a sewer machine.