How to properly glue wallpapers in corners - sticking technique

Have you bought a new apartment or decided to renovate the renovation in the old one? You can hire a team of repair workers who will fulfill all your wishes, and you can save some of the work to take over. For example, wallpaper gluing. But before proceeding directly to the matter, you need to learn how to prepare the walls, what inventory to stock, how to properly glue the wallpaper in the corners and on flat surfaces.

Of course, the most important thing is the wallpaper. You need to buy them with a small margin. It is especially important to consider this if you have chosen a canvas with a large pattern. To maintain rapport, sometimes you have to cut off pretty large pieces. In the store, check the integrity of the rolls and compare the markings on the labels: the wallpaper must be from one lot, otherwise their color may vary.

The choice of glue depends on the type of wallpaper . It exists for paper, vinyl, non-woven wallpaper, and there is a universal option. It will come in handy if you decide to combine different density rolls.

Another need to stock up a bucket for the glue, wide and narrow brushes, roller, rags, rubber and ordinary spatula, scissors and a stationery knife, tape measure, ruler, pencil.

Some people ask the following question: "Is it possible to glue wallpaper on wallpaper old?" So you can do it, but do not. Firstly, you can not check the walls for the absence of mold and fungus. Secondly, correctly to glue wallpaper, most likely, will not work. When the adhesive composition soaks and moistens the old coating, it can go away in some places, and as a result, untidy bubbles appear on the wallpaper. Do not try to tear off the old streaks "dry", first sprinkle the walls with warm water from the spray gun, wait about ten minutes, and then help yourself with a spatula, remove the wallpaper from the floor to the ceiling.

If you bought a new building, and you have simple concrete walls in your apartment, they must first be plastered and primed. In extreme cases - to cover with paint.

Now you need to cut the wallpaper into strips, not forgetting to combine the pattern. On the packaging with glue you will find recommendations for pasting. Do not be afraid to get down to business, as correctly gluing the wallpaper in corners and on even walls - the task is not as complex as it might seem at first glance. It is important only that the first strip lies strictly vertical. To do this, you need to throw a plumb from the ceiling almost to the floor (a weight on a long string or a rope), gently press it against the wall and make a mark with a pencil. There is no need to draw a continuous line, draw lines at a distance of about thirty centimeters from each other. The edge of the strip is combined with the label and glued. The rest of the strips will form a butt.

Rare house can boast absolutely straight walls with angles of 90 degrees, so the question arises: "How correctly to glue the wallpaper in the corners?" If you combine two strips, they can disperse, and there will be a bare piece of the wall. And if you try to bend a whole cut of wallpaper, you may get an ugly fold or bubble. Then, how to properly glue the wallpaper? In the corners it is necessary to make an overlap. To do this, measure the distance from the edge of the pasted strip to the corner and add one or two centimeters to the bend. We take a dry strip and cut it along so that the width of one part is equal to the value obtained. We glue this part, carefully ironing the corner with a rag. If the wallpaper is too wrinkled, use a clerical knife and cut it. Now the bent part is well glazed with glue and superimpose the second part of the strip so that the edge passes strictly vertically. Remove excess glue. Now you know how to properly glue the wallpaper in the corners, do this in the rest of the room. And do not forget that when the wallpaper is pasted, a draft is unacceptable, otherwise the stripes may just fall off.