How to mount a siding with your own hands

If you are thinking about how to mount the siding, then you need to familiarize yourself with the technology of the work. Acquiring siding as a finishing material, you should know that it is resistant to external influences, which is important for cement, steel, and vinyl coatings. Wooden material requires additional treatment every three years. The frequency will be affected by the complexity of weather conditions. If we talk about longevity, then the last version of the siding can last more than one decade only with the appropriate care. The surface in the process of exploitation will have to be tinted. If you want to refine the house with more practical material, then you should choose plastic siding. But according to the variety of colors and textures, each material can compete with analogues. Some vinyl panels are almost impossible to distinguish from those that are made of natural wood. It is important when buying to pay attention to the thickness of the panel: the difference between these parameters in one package should not be more than 1 millimeter. Otherwise, we can talk about factory marriage.

Features of storage of siding

Before you mount the siding, you need to purchase the material, but some masters buy it long before the work starts. A significant percentage of damage occurs at the storage stage. If there is such a need, then to treat the panels should be extremely accurate. Two days before the start of the manipulation, it is necessary to put the packaging in a warm room. On the street before the installation should be only a few products, which in the near future it is planned to fix on the wall. The surface on which you will perform the installation must be level, this will eliminate the sagging of the edges and the central part of the panel. As the minimum storage temperature of the decoration material described, -30 degrees protrude, while the canvas should not be stored at a temperature of +50 degrees or more. It is not recommended to stack the packages in one pile. This does not apply to steel panels, which are not subject to deformation in the event of temperature changes.

Preparatory work

Before you mount the siding, it is important to prepare a certain set of materials and tools, among the latter you can select a puncher and a drill. Without them, the master will not be able to install the steel crate, which is necessary for further work. You need a circular saw or a jig saw . These tools will greatly speed up the workflow. If you do not get them to rent, but there is no such equipment, you can do with a hacksaw for wood and metal. It will take a screwdriver, without which the fastener installation will take several days. You can not make exact measurements without a tape measure.

The position of the elements can not be corrected without a building level. It is important to prepare a hammer, as well as scissors for metal, twine and kiyanku.

Preparatory work in the wall area

If you are faced with the task of how to mount the siding, you should know about the intricacies of the preparatory work in the wall area. If the house is new, you can proceed immediately to further work. If the building has already been used, it is necessary to remove old finishing materials from the surface, to rid the base of cracks using plaster. The wall should be free of mold and fungus traces, for this purpose it is advisable to use special compounds. Crumbling plaster needs to be removed, like rotten planks.

Mounting of the frame system

If you want to learn how to properly mount the siding without deformation, it is important to remember that it is necessary to follow the rules for mounting the shed. It can be made of wood, this option is considered the cheapest, it does not assume the master has special skills. However, it is necessary to be prepared for the fact that the wooden frame is short-lived: after a while it may undergo rotting. The second version of the frame is made of steel, this option will be more expensive, but much more durable, and also reliable.

Installing a secondary profile

If the wizard has thought about how to properly mount the siding without deformation, then he must have information about how to mount the auxiliary profile. On the finished frame, you must mount the starting horizontal element, which is fixed from the upper area of the socle or from the ground, while providing a distance of 40 millimeters. In the corners it is necessary to leave a distance of 15 centimeters. At the junction of the slats, a gap of 5 millimeters should be provided. Angle elements should be fixed at the corners of the building, it is important to move away from the eaves 6 millimeters. If you are thinking about how to mount the siding with your own hands, then do not break the sequence. Initially, the starting profile must be set, and then the corner elements must be installed. In places where siding is mated, the H-profile is mounted. On this we can assume that the preparatory work has come to an end.

Siding installation

Before installing the siding with your own hands, you need to study the installation procedure. The first panel should be installed in the grooves of the vertical profiles. In order to avoid deformation of the web, it needs to be slightly bent in the central part. After the sheet is lowered to the starting profile and snaps into place. After the lower part is reinforced, fasteners must be installed in the central part of the technological holes. This is required for the free movement of panels. All the following series should be installed using the same technology. The exception is the topmost detail: initially you need to fix the finish line, only then it should be turned on the panel.

Features of work

If you do not know how to properly mount the siding, it is important to get acquainted with the nuances. Between the hardware cap and the surface of the canvas it is necessary to leave about 1.5 millimeters. Choosing nails and screws, you need to prefer the fastener that is made of stainless steel. Whereas the fastening screws must be rubberized. If a wooden frame is used in carrying out the work, its elements must be treated with flame retardants in advance. If manipulations are performed in winter, the tolerances for thermal expansion should be increased from 6 millimeters to 10. This is relevant for the material that is mounted between vertically oriented profiles. Before installing the metal siding, it is important to look at the thermometer column. If the mark was below -15 degrees, then work must be postponed.

Recommendations of a specialist

Installation of the siding on an uneven base is strictly prohibited, it is important to consider if in a year you do not want to do repair work. If the panels have been deformed during transportation or storage, they are recommended to be replaced (if there is no stock, the canvas data can be placed in places where they will not be so noticeable).

What not to do to the master

Before you mount vinyl siding, you should familiarize yourself with the basic rules. Among them, one can single out the need to use extremely well-dried bars to equip the frame system. If we ignore this rule, the framework will be deformed, which will result in a change in the original sizing. Acquiring fasteners (nails and screws), you must choose those that have a length of 30 millimeters or more, otherwise you can not achieve a reliable fixation. The distance between the fasteners should not seem more than 40 centimeters, although everything will depend on the crate. As a maximum distance, sometimes still choose 60 centimeters. As to how to mount the siding-log, it is important to know that the fastener must be mounted perpendicular to the panel, this will prevent the creation of an obstacle for the next row of finishing material. It is forbidden to fix the webs through the surface, this kind of installation can not be called durable, as the elements will begin to deform when the first colds come.

The overlap of the panels should be 25 millimeters, this will prevent the ingress of external precipitation and dirt into the joints. If the fixation of the siding is done with an overlap, then the master will have to cut the nail bar. Such manipulations have a positive effect on decorativeness and functional features of the panel. Between the facade insulation and siding it is necessary to provide an air gap, the width of which is 3 centimeters. It will prevent the appearance of condensation. Such an air cushion, among other things, will positively influence the temperature inside the premises.

Finally

If you need information on how to mount the socle siding, then everything is simple: you need to use the same technology that was described earlier in this article. At the same time, experts say that in no case can liquid seals be used in their work, trying to increase the resistance of panels to moisture. Thus, you will only achieve that negatively affect the integrity of the structure.