Form for making garden paths: tips for using

Everyone in the UK knows that his house is his fortress, and therefore no money can be spared to settle his home. Similar opinion they adhere to and in the question of arrangement of the garden. Few people know that among the British there is an opinion that at least one third of the cost of the house itself should be spent on the garden.

In our region, such a policy may seem like a real waste, and yet a rare owner of a private house will not want to bring the adjacent plot to the proper state, investing in this enterprise not only family capital, but also his own soul. Of course, the costs for the services of a professional designer or builders are not affordable for everyone. However, there are things that can not be saved, for example, garden paths. There are many options for covering them: wooden flooring, gravel, crushed stone, expanded clay and even tile. Give your site a touch of elegance and some form of luxury will help to make garden paths.

Plates made in this way can easily imitate stone or paved flooring. The form for making garden paths is able to give the site an individual and incomparable shape - just add a little pebbles or a special pigment to the solution. In addition, the use of this technology can significantly save on the material. Plastic molds for garden paths stand relatively inexpensively, and only one is enough to produce about a thousand plates.

Not to mention the variety of stencils that manufacturers now provide. As a primer, a cement mixture and sand are usually used (1: 3, respectively). Then the required amount of water is added. The resulting solution is good in itself, and with the addition of a plasticizer of concrete, its quality only increases.

It remains only to decide on what form for garden paths will suit specifically in this case. When choosing in favor of this or that stencil, you should start from your own preferences. However, it is worth remembering that the appearance of the track should be in harmony with the design of the garden.

Stages of manufacturing plates

• Cleaning and careful leveling of the surface, which will subsequently lay out the slabs.
• Preliminary work with the stencil. The form for the manufacture of garden paths must be lubricated with some film-forming material, for example, linseed oil or automobile "working off".
• Directly filling the mold with a ready-made cement mortar and removing the surplus mixture from the surface with a spatula or an improvised material, for example, it is convenient to do it with a rod made of wood, metal or even plastic.

It is not necessary to wait until the cement hardens completely, it is enough to leave the solution in the cells for 60-90 minutes. After this time, the plates will be strong enough to be easily removed. While they freeze, the very form for making garden paths can be reused.