How to make night vision goggles?

Do you dream of seeing in the dark as a cat and remain invisible to others? To accomplish this desire will help night vision goggles. This device is used in various areas, for example:

• For all sorts of search operations;
• For the professional work of guards, police, military and drivers, who often have to repair vehicles on the roads in total darkness;
• For those who like to photograph or shoot a wildlife camcorder at night.

Needed night vision goggles for hunting, fishing and tourism. Wearing them, you can quickly collect in the dark wood to kindle a fire, freely go through the forest thicket and do not get lost in it, do not stumble on the root of the tree and do not fall into the pit. And this is only the main useful qualities of this device. There are a lot of other nuances.
Night vision goggles can be bought at the store, however, they are very expensive. An alternative solution is to make them yourself at home. Try to remember your knowledge of chemistry and physics, and then it will be easier for you to understand how to make night vision goggles yourself. Find literature, read the information, prepare.

Step-by-step instruction
Take 2 glass plates and immerse them in a solution of potassium dichromate and sulfuric acid (for about 4 hours). Then dry the glasses and fix them over the porcelain cup at a height of at least 10 cm (you should put tin chloride in the container). Now put all this in a muffle furnace. On the cup, first put a plate of metal.
Preheat the oven to a temperature of at least 470 degrees Celsius. Remove the plate quickly. Now watch closely the changes that occur with the glasses. They will gradually begin to be covered with the finest film that conducts the current.
Turn off the stove and allow the panes to cool. Apply to the side of the glass, where there is no conductive film, lacquer and lower the glass in a solution of tiaricarbonide and lead acetate. Then pour the alkali concentrate here, gently stirring the resulting liquid. After 15 minutes, carefully remove the glass from the cup.
Put the same cup in the oven, but now pour silver solution into it. Place the glass above it.

Heat the oven to 900 degrees. On the plate, a mirror film should gradually appear.
To obtain a colorless crystalline powder, mix copper and ZnS (10: 100) in a cup and heat the mixture in an oven.
Take the lacquer "Tsapon" (for a bunch) and mix with the powder. Now drip this mixture on the plate and let the drop spread. Ensure that the coating is level. Connect the two plates, slightly squeezed, dry them, and at the end of the process, check the sealing of the device. The night vision goggles are ready.
Do not forget to assemble the circuit of the high voltage generator!
Now we have to put everything together. Take the lens for the device from the camera, and for the eyepiece - biconvex lens.
After checking all the connections, you can start the connection. The fact that everything is working fine, you will understand by the characteristic squeaking of the transformer.
For a clearer image, you need to change the generator frequency and voltage levels several times.
If you succeed, you do not have to spend a lot of money on night vision goggles, buying them in the store.