How to make a flashlight yourself?

Now, the sky lanterns that have come to us from the east have become quite fashionable, but many have already fallen in love. They can be bought, but some may be interested in the question of how to make a flashlight? Further it will be told exactly about this.

To make a flying heavenly flashlight you need to be prepared for the fact that it takes a lot of patience. It may well be that the first couple of samples will not take off at all, but also unsuccessful flights have the potential of perfection, because on their experience you will understand where and what errors were made, which will then significantly improve the design. So, you should know that the celestial flashlights include a light paper dome on a wood frame, as well as a burner located inside. Now let's take a closer look.

How to make a flashlight: the choice of material for the dome

Traditionally, the dome is made from rice paper, but it is difficult to call this material easily accessible in our region. To produce a celestial flashlight, you need paper that is strong enough and light, while thin and moisture resistant. Ordinary stationery tracing paper meets these requirements best. It is worth choosing the thinnest.

How to make a flashlight: fire retardant paper treatment

Now that your flashlight does not catch fire, the paper must be impregnated with flame retardant, this is a substance that protects from fire. They can be in the form of a powder or a ready-made solution, which can only be impregnated. There are many compositions on the market, for our purposes the most suitable ones are those intended for impregnation of decorative fabrics. Such funds are usually offered in construction stores. They are best applied by spraying.

How to make a flashlight: Dimensions and shape

Best of all, if the size and shape of your flashlight will match that produced by Chinese industrial production - 40x100 centimeters. The simplest way is to make a wireframe of such a wire product that will hold the mold in a qualitative way, but they should be flexible enough and easy to work with. It is worth using a wire with a diameter of about one millimeter. As the first experiment, it is best to make a flashlight in the form of a cylinder or a cube. To make the base of the flashlight cylindrical, it is enough to fold the wire into the ring, and then place it in the center of the body made of tracing paper. The cross on which the burner will be placed should be made of the same wire.

How to Make Heavenly Lanterns: Burner

Here you will have to conduct several experiments, during which you will be able to adjust the duration of burning and the height of the flame of the burner. To make a burner, it is worth taking a few strips of fabric half a meter in length and 4 cm in width, soak them with a mixture of melted paraffin and fluids for breeding bonfires. Tissue roll into a roll, then leave to freeze. Set fire to one roll. With a very high flame, several layers of fabric should be removed, with attenuation before ten minutes, you need to add turns. This is how you can check the optimum dimensions for the burner.

How to make a paper flashlight: check weighing

Before you send your product on a journey, you need to weigh it on the kitchen scales. The standard weight for a Chinese lantern is a weight of 250 grams. If your product turned out to be heavier, then the design should be facilitated.

Do heavenly lanterns solely for the sake of the manufacturing process. Now their cost is so low that it is not difficult to buy. You too can make them yourself, because it brings great pleasure.