How to install a mount on a snowboard? Mounts for snowboard: dimensions. Children's snowboards with attachments

After buying a board, many are wondering how to mount the mount on a snowboard. If the fixation is incorrect, skating will not bring any pleasure.

Define the rack

Before installation, it is important to determine the rack. In other words, it is necessary to choose the leading leg. If you do not know your rack, you need to take a run and ride on a slippery floor or ice. If you put forward your right foot, your counter is called "guffi". If your jogging leg is left, you are "regular".

There is another way to check: someone pushes you from behind, the main thing is that it's unexpected. Note for yourself, from what foot you started moving. This will determine how to fix the mounts on a snowboard. There is a small percentage of lucky beggars, for whom it does not matter at all, with what leg to ride.

Determine the angle

When fixing the mounts to the snowboard, you need to take into account the parameters that depend on the driving style. This is the size of the crepe angle and the width of the stand in relation to the board. With these indicators, you can conduct experiments, determining for yourself the best and best. For a more sustainable descent, a wider rack is suitable. If you like harsh maneuvers, set a narrow one.

The rigidity of the board also affects the angle of attachment of the fixtures. With increasing rigidity of the product, an angle (0 degrees - this is perpendicular to the longitudinal axis of the board) also increases. The conclusion: a Phillips screwdriver, put in a pocket is a necessary thing in the snowboarder's pocket.

Mounts for snowboarding should be symmetrically installed relative to the center. The purpose of such an installation is an equal protrusion of the heel and toe of the shoes over the edges of the board. If you are in urgent need, you can take out a little more sock, but in no case do not have a heel. The optimal size of the boot should not be more than 1.5 cm.

Set the first time

The height of the snowboarder determines the width between the mounts. With this increase, the support that is needed to maintain a stable position is also expanding. A narrow stance may not allow the weight to be optimally transferred during the percussion and quickly turn around. Wide does not allow you to fix and hold the position on one leg.

Before installing the mount on a snowboard, experts recommend measuring the distance from the sole to the knee. This parameter is the width of your first rack. In this case, the angle of attachment in the front is 20 degrees, the rear is 5. It will be easy to do, because there are divisions on the mounting discs for easy installation.

Separately, you can write about such a common rack, as "duckfoot", in which the knees are deployed in the sides. To this situation resorts those who do not represent their lives without freestyle. In this case, experts recommend the angle of the front attachment to set at 18 degrees, the rear - at 6.

Conclusion: how many snowboarders, so many racks. Therefore, ride, experiment and choose for yourself the ideal position, in which riding will be a real pleasure.

We study the composition

Both adults and children's snowboards with bindings can be purchased in many specialized stores. It is important for you to check only the equipment:

• Bolts;
• Fastening;
• Disks (two pieces).

It is necessary to understand the composition of the fastening itself:

• Back arc;
• Highback;
• base;
• Gas pedal;
• Straps (lower and upper);
• disk.

How to install a mount on a snowboard: we work with a screwdriver

For self-installation, you need a Phillips screwdriver. For clarity, we will consider the installation of fastenings at the "guffi" stand.

Step one - we measure immediately with boots for riding. During fitting, it is important to adjust the gas pedal, which is easily adjusted from the base. We fix the fixation, we fix the boot in it, while its part should essentially get out of the gas pedal. Before this, it is important to tighten all the straps well. As a result of adjusting the gas pedal, it must reach the nose of the boot.

An important point is the optimal positioning of the rack (degree of rotation). We will establish universal angles of fastenings on a snowboard: the forward leg is turned on 15 degrees, left - on 6, but in an opposite side.

Step two. The position is adjusted, the crepe stands on the discs. Now it is necessary to fasten the fasteners. Each of them is fixed by four bolts. Once again, check: the sock and heel go out of the board at the same distance.

We installed snowboard mounts, the dimensions were fixed, and now you can ride.

Adjust the fasteners

Earlier it was mentioned that after several descents we might need to adjust the installation of the fasteners. Let us assume that this hour has come. Consider children's snowboards with attachments and their adjustment, or "fit" under the skating. By the way, crepes for adults are regulated in exactly the same way.

To change the rack "guffi" to "regular" is simple, you only need to attach the strap from the mount to the opposite side. The choice of the position of the attachments "for themselves" usually begins with their adjustment. It all depends on the size of the foot. It is necessary to disassemble the screw fastening, fix the foot in it and tighten it tightly on both sides. After this, it is necessary to select holes that fit the size of your foot. Further, we return nuts and screws on the places. If the attachment is soft, you can simply adjust the heel lift. But here you also have to shoot everything.

After disassembling the screw connection, you can adjust the support of the lifting of the foot, setting it in the position that is necessary. After that, you need to assemble the connection, tightening it tightly. The exact angle of ascent is also easy to determine using the ratchet mechanism. For a strong fixation of the foot, it is necessary to move the lifting lever up and down. If you want the mount to loose, press the small levers at the same time.

Next, we adjust the front strap, which fixes the toe of the boot. Again we disassemble. The lifting of the foot is set to the required position, the connection is made and tightened tightly.

Choosing the types of skating

We give the optimal position of the legs and mounts for snowboarding.

• Dimensions for the style of riding "Karving". This descent by sharp turns, one of the most difficult kinds of snowboarding. Turns are performed at high speed with a large inclination of the body relative to the mountainside. Both legs here are maximally deployed forward. Despite the fact that for this type of produce separate products, start to sharpen the technique better with a conventional soft board. The jogging leg is fixed at 60-70 degrees, the rear leg at 40-50 degrees. This will allow in the case of a strong edge not to touch the snow with heels and socks.

• For the style of riding "Freestyle" you can safely install mounts, as with beginners, because you have to ride differently and many times perekantovyvatsya.
• Consider the dimensions for the skiing style "Freeride". Here the nose is much more than the tail, so the rack must be observed to the maximum directed. How to install a mount on a snowboard? In this case, it is better to set the corners accordingly. Front fasteners should have an angle of inclination of 30-45 degrees, and rear - 20-35. Here, apparently, you have to go down only one leg.
• Dimensions for the style of riding "Jibbing". Wishing to master jumping along the rails, it is better to use the freestyle stand, but choose a wider position (the distance between the fasteners).

Easy skiing and conquest of new slopes!