Without water, it is very difficult to live in any dacha section. Sooner or later you will have to drill a well, although this process at first glance may seem something supernatural. In fact, you can do on your own. If you make a full well, you need to be prepared for the fact that it will take a lot of time, will be invested a lot of money. In the case of a well, many difficulties can be avoided. Of course, the type of soil and the depth of the water play a big role here. Other serious circumstances that can affect the result are not observed.
So, how do you drill a well on your own site? First of all, it is necessary to determine the level of water occurrence. This can be done in two main ways. In the first case, geological maps are studied that can tell at what depth the aquifers are located. Specialized firms draw information from them. However, you can also ask the neighbors who have a well about the distance to the water. Drilling a well without the involvement of professional workers is quite possible, if only to have an approximate idea of this technology.
Well proven method of drilling with the use of auger. The site where the work will be carried out, must first be leveled. After this, you can make a guide groove, removing the ground for about two bayonets of the shovel. Then the drilling itself is performed. Initially, one person can cope with the rotation of the drill, but with the advance into the earth someone will need help. Drill a hole will be much easier if you periodically pour water into the hole. After performing several revolutions, the tool is pulled out and completely cleaned of the ground.
When the handle of the drill goes down to the maximum, an additional knee is added. However, for comfortable work, you need some pedestal in the form of a barrel or box. After the lengthening of the handle, the process continues until it penetrates into the aquifer. To drill a well to the very end, it takes a lot of effort. The metal pipe must be lowered immediately, so prepare it in advance. To do this, a 6-millimeter drill is used to make holes that allow water to enter the pipe.
Raskachka, as a rule, is carried out by the centrifugal pump with high capacity. He is not afraid of a dense environment, which in this case is very important. In connection with a rather long process of rocking, it is desirable to take care of the drainage channels. The main advantage of self-drilling is that the site does not have to run a bulky machine special equipment. Thus, the landscape design and green spaces do not threaten anything. In addition, this option is the most promising in terms of tightening and swinging. Still, it's useful to know how to drill a well yourself.