How to connect the projector to a computer: Instruction

A huge number of different devices can be connected to the computer. All the users of the PC should know about the features of each process. Today we have to understand how to connect the projector to the computer. Actually, to realize the idea in life is not so difficult as it seems. The main thing is to know about some nuances of connection. What should users pay attention to? What will help to translate the idea into reality?

Ways to connect

First of all, it is important to understand that there are several options for the development of events. How to connect the projector to a computer? The user can use the following connection methods:

• Wire mode via VGA;
• Wireless method;
• Use HDMI.

Accordingly, the first option is used on stationary computers, and the second - on laptops. There is nothing particularly in the process. The main thing is to act correctly. How exactly?

Preparation for the process

For example, prepare everything you need to implement the process. To realize the idea in life is possible only if there are certain things. They, as a rule, are for all users. In any case, after acquiring the projector accurately. Therefore, often with preparation there are no problems.

How to connect the projector to a computer? This will require:

• projector;
• a computer;
• monitor;
• Wire VGA,
• Power supply cable;
• Drive with drivers.

This is the most common inventory that is used to implement the task. In addition, you need to have a separate outlet to which the projector is connected.

Instructions for working with VGA

The simplest connection is working with a VGA cable. How to act in this situation? When all listed components have a user, you will need to follow a certain algorithm of actions. And no matter what operating system is installed on the computer.

How to connect the projector to a computer? It is recommended that you follow the instructions below:

1. Put the projector in the right place.
2. Connect the power cord to it and plug it into the outlet.
3. Take 2 VGA wires. Connect them to the projector.
4. One of the cables is inserted into the monitor, the other - into the system unit, instead of the monitor.
5. Turn on the projector, then the computer.
6. Install the drivers for the connected device.
7. Set the projector in the operating system settings as a monitor.
8. Save changes.

It's all. No more special actions need to be taken. Sometimes questions arise about how to expose a projector in place of a monitor in the operating system. But this will be discussed later. First it is necessary to understand all the nuances of connecting the device.

Via HDMI

You can also use the HDMI cable to work with the projector. This is a better way to transfer images. But how to connect the projector to the computer?

To do this, you will have to use the previously proposed algorithm of actions. The only difference, which is recommended to pay attention is that the VGA-cable will be replaced with HDMI. In the rest the instruction remains the same.

An important point is that you will have to work initially with the equipment turned off. Otherwise, there is a risk of malfunctions and malfunctions with the projector.

Without wires

Nevertheless, the listed methods are relevant only for stationary computers. Work with a laptop this way does not work. How to connect a multimedia projector to a computer?

It has already been said that you can use a wireless connection. In fact, there is nothing special or incomprehensible in the process. The main thing, again, is to observe a certain sequence of actions. Only in this way will it be possible to realize the task in full.

To connect a computer to a projector (monitor), you need to do the following:

1. With the technology off, insert special USB-signal receivers into the laptop, as well as into the projector.
2. Turn on the equipment. As soon as the green light on the projector lights up, it will synchronize with the computer.
3. Install drivers to work with the equipment. In Windows 7, they can be detected automatically.
4. To put the program under the name "Connection to the projector". Usually it is on the drive with the device drivers.
5. Run the installed software.
6. Accept the available hardware settings.

It's easy and simple. Now it's clear what it takes to connect the projector. The computer (Windows 7 or any other operating system - it's not so important) you must necessarily have a set of new drivers for the peripheral device. Otherwise it will malfunction.

System Settings

Now a little about how to properly display data from a computer on the projector. It is important to know about this feature. Otherwise, the projector will be connected, but it will not work.

Typically, the user should follow the following steps:

1. Start the operating system.
2. On the desktop, click on the right mouse button on any free area.
3. Select "Screen Resolution" in the list that appears.
4. In the "Screen" section, select "Screen 2, Projector". The inscription may differ, but the meaning does not change.
5. Save changes.

After that, the image should be transferred from the computer to the connected equipment. It does not matter if Windows 7 is installed on the user or Windows 10. How to connect the projector to the computer? From now on the answer to this question is clear. In reality, everything is not so difficult. The main problems can arise with the output of the image from the computer to the projector. But to fix the situation is not difficult.