How to clean the laptop from dust without dismantling it? How to clean your own laptop: manual

At some point, the ergonomics and portability of the laptop become a drawback in the eyes of its owners. It is enough to imagine a situation when it is required to upgrade the hardware of a compact device, and all the advantages of "undeniable" advantages turn into one big problem "labor-intensive dismantling of the case". Infrequently, but nevertheless, the emerging need for a question: "How to clean a laptop from dust without analyzing it?" - for many users, and at all seems insoluble. But is it really so? Let's figure it out!

Difficulties in understanding the service process

Only when catching famous parasites need haste. And this is the key point in solving the problem of "how to clean your own laptop"! Let's not argue, the obvious accumulation of dust on the grille of the vent requires operative intervention on the part of the user. But is the outer part of the air channel always being purged with light or thoroughly cleaned by a brush is a fully serviced maintenance? Probably yes. But facts are a stubborn thing, and as practice shows, no! For "visible" purity, critical contamination grams may be hidden. Own comfort: "More dust is not dangerous" - in fact, can lull your vigilance. Since the internal channels of the cooling system embedded in the microparticles are still the cause of the overheating of the hardware components of the laptop. No-heat capacity, you know, a dangerous thing!

How do you know when it's time to "H" to service a laptop?

So, the expediency of the actions taken in resolving the situation "how to clean the laptop from dust without disassembling the device?" Is first and foremost a carefully monitored working elements of the system.

• Go to the BIOS of your computer.
• Depending on the manufacturer of the base system, as well as its version, the section in which temperature information is displayed is often referred to as PC Health Status.
• New UEFI firmware displays "degrees" in the main BIOS window (a).

If you see the actual value of 60 degrees Celsius and above - it's time to clean the "patient". The annoying rumble of the fan's rumble, the statistical cracking and the baseless "braking" of the OS are also unfavorable signs and an excuse for your intervention. Of course, in the game you can feel the "hot potential" of your computer. However, this phenomenon can not always be the cause for excitement. It is possible that you have been "tensing" the graphics card and CPU for too long. As you can see, the question: "How to clean the laptop from dust without analyzing" - you can and anticipate!

Thoughtful design from caring developers: easy dismantling

Let's move a little from the context of the main problem and still touch upon the question: when is the disassembly process appropriate?

• Some manufacturers, providing for the accumulation of dust in the interior of the case, give their portable devices miraculous property "easy access to the cooling system."
• In such laptops, it is enough to unscrew several screws that fix the protective cover, and - voila - the cooler and the ventilators are unobstructed. Take it and clean it, blow it off and clean it!
• This kind of cabinet construction can be found in different manufacturers. Nevertheless, the leader of comfortable cleaning is the products of Toshiba.

However, the question: "How to clean an Acer laptop?" - is resolved just as easily. Despite the fact that the process of dismantling the devices of this brand is often incredibly difficult to implement. However, you can do without "potholing" inside a screwdriver ...

Internal cleaning of the laptop from dust pollution without hacking the case

Browsing the video-tuner for servicing your laptop model specifically is the first thing you need to do to make sure that you can not access the cooling system without hindrance. Then remove the battery and follow the simple recommendations that in the end and will be a practical answer to the question: "How to clean the laptop from dust without analyzing?".

• Prepare: a can of compressed air (household vacuum cleaner is unlikely to fit), alcohol, microfiber, brush and a little patience ...
• Go to the stairwell or to the street. A spacious and well-ventilated room is also appropriate when performing follow-up actions.
• Short presses "push" air from the can through one of the ventilation holes of the laptop.
• Dust deposits on the ventilation walls must first be destroyed. Therefore, "attack" each corner of the air intakes, trying to push the blown streams with each other. However, do not overdo it ... there is a great danger of damaging the cooling fan blades.
• Technically shifting from the center to the edge of the body of the laptop (referring to the exit of the air intakes), blow out the "shattered" dust until it becomes.
• Wipe slightly moistened in alcohol microfiber sections of ventilation grilles, which are covered with dirt. Brush to the rescue!

How do I clean my laptop keyboard?

Acer or HP modification of a laptop, as well as a portable device of another company, can become unmanageable! And in the literal sense of the above expression.

If the fat-footprint and benefit for the experts of fingerprinting, in the case of a critical accumulation of such a product, the sticking of the keys can not be avoided. Dust and fat will cause a partial inoperability of the keyboard.

• Using a brush (by the way, the pile should be of medium hardness), carefully clean the laptop control module.
• Pay special attention to the space between the keys. Here you will need alcohol!
• A drop of the mentioned substance between the buttons and a few intense taps will certainly give a positive result.

When self-cleaning can be dangerous: what to do?

In the case where dirt has got under the body of the buttons, the process of step-by-step removal of each such element can not be avoided. In this case, it is advisable to clean the laptop (the price of this service is from 300-700 rubles, by the way, low) in a special service center or a workshop for repair of similar electronics. As a rule, non-insular type buttons have a complex design, and when you are alone, there is a great risk of breaking the latches and fixing elements of the keys. However, for those who doubt their abilities, whose technique is still under warranty, it is certainly better to turn to specialists. Agree - this will be a wise decision!

A few tips for edifying

• Get a special vacuum cleaner for your laptop.
• Do not use the portable device on the street with high humidity, dust, in an environment that is considered unfavorable.
• Systematically perform a full cleaning of the device.
• Remember: free access of air to the ventilation channels of the laptop is a complete work of the cooling system. Therefore, it is strictly forbidden to use a laptop when it "drowns in the arms" of upholstered furniture or for a long time is in the "on the knees" mode.

In conclusion

Now, if you have a question: "How do I clean an HP notebook?" - you know what steps are necessary to take this. After all, literally all portable electronics is subjected, in general, to the equally produced "sanitary cleaning" process.

Especially smart users, before using a high-pressure hose of a working compressor unit, one should think about how this cleaning can end. Perhaps you will smile, but the result will be forced displacement of the internal components of the laptop. Clean you and long-term use of your laptop!