How to clean the iron from the carbon: TOP effective ways

How to clean the iron from the deposit? Any good host knows the answer to this question. This problem is quite urgent. Despite the fact that many manufacturers of household appliances claim that it does not need care or cleaning, it still does not burn. And no built-in self-cleaning systems, the use of modern materials do not help. Because of the hard water, synthetics, as well as the unwillingness of some women to follow the instructions for use, cleaning the iron from the carbon is necessary. After all, the scum on the sole prevents you from ironing your clothes properly, and you can even spoil your favorite things.

How to wash the iron from the carbon: effective ways

1. Use the products that are sold in stores. One of the best is chemical pencils. How to apply them? It is necessary to turn on the iron, warm it properly, then turn it off and cover the sole with a pencil. After a while, a chemical reaction will occur, making the deposit soft. You can easily remove it with a dry cloth. Do not pay attention to the unpleasant smell, it's just a couple of ammonia. Chemical pencils are absolutely safe for health. When the iron cools, you can wipe the sole with a damp cloth.
2. How to clean the iron from the deposit yet? With the help of "Hydroperit". It will take a couple of pills. The sequence of actions is the same as in the previous example. But you need to work in a room with good ventilation. After all, the purification process will be accompanied by an active release of gas. Pollution, which as a result of exfoliation, it is easy to wash off with cold water.
3. People's prescriptions can also come to help. How to clean the iron from the carbon, if there is no chemical? Use table vinegar. Impregnate them with coarse matter, remove dirt, but do not turn off the iron from the mains. You can mix vinegar with ammonia. The effect will be more noticeable. If the first time did not work, just iron the mixture moistened in the mixture.
4. Useful and salt finely ground. But it is not suitable for cleaning irons with Teflon coating. So, on paper it is necessary to pour a layer of salt, and then to conduct on it a well heated iron with pressure. Do not use newspapers as a lining. Otherwise, you risk dirty the bottom of the device with printing inks. If you mix salt with pre-shredded paraffin, the dirt is better cleaned.
5. Helps and toothpaste. If the contaminants are insignificant, they are easily removed in this way. It is enough to put a little toothpaste on a wet cloth and rub the soleplate of the iron. Then you need to wash it with water and treat it with a dry, clean cloth.
6. How to clean the iron from the deposit, if it was formed after ironing? Preheat the appliance, then turn it off, remove the synthetics that melted, using a wooden stick, scoop or scraper. Then you need to hold a hot iron several times on rough matter.
7. If you have a first aid kit at hand, you can definitely find the answer to the question about how to clean the iron from the deposit. Take ordinary hydrogen peroxide, apply it to the cotton wool, then wipe the base of the iron. If this is not in your house, perhaps there is a liquid in the cupboard for removing the varnish? Use it.

The formation of deposits on the sole of the iron is not a reason to buy new household appliances. There are many ways to solve this problem.