How to choose a typewriter for manicure and pedicure? Machine for hardware manicure and pedicure

Well-groomed and aesthetically pleasing nails of hands and feet are a pledge not only of beauty, but also of women's health. The modern beauty industry offers a variety of ways, techniques and apparatus for caring for all parts of the body. Make a professional manicure or pedicure in the salon and at home helps machine for manicure and pedicure. Manufacturers in each of their devices try to take into account all the characteristics necessary for high-quality performance.

But the consumers are still very keen on the question of how to choose a machine for manicure and pedicure, what criteria should be given special attention, and with what it will be possible to reconcile.

What does the unit consist of?

Before you run to the store for a typewriter, you first need to find out what will be in the box. The machine for hardware manicure and pedicure consists of two main blocks: the processor and the handle, to which the cutters are directly fixed.

The main processor is responsible for the speed of rotation of the nozzle, sets the direction of motion. An additional built-in motor is in the handle, which twists the nozzles.

Advantages of devices for care of feet and hands

The appearance of technology of this kind in the beauty industry allows you to improve your body with even greater comfort and quality. If we talk about the use of such equipment in the walls of beauty salons, the milling machine for manicure and pedicure allows:

• Reduce the physical load in the first place for the master himself, which will save energy, serve a greater number of customers.
• Save time, because for the same procedure, done by hand and the device, takes a different amount of time.
• Increase the quality of service, raise the prestige of the salon, attract new visitors, and, therefore, increase profits.

The machine for manicure and pedicure, reviews about which so much interest many women today, will be a real godsend for women who want to avoid edging manicure, for fear of infection, but who love to look at their ideal marigolds.

What should be the machine: the choice of power

Before choosing a typewriter for manicure and pedicure for the home, you should find out how the power of the device affects its operation. What can be fraught with the wrong choice?

Even for home use, it's better to pay attention to devices with a power starting with a figure of 35 watts. A low-power device can initially show good results, but later failures will occur more often, delivering a lot of inconvenience and leaving a sense of money thrown to the wind. Moreover, many low-power devices do not have an adjustment function, which does not make the process more comfortable and better.

Power is of great importance when working with false nails. Removal of the nail should be done quickly, so that the natural plate does not have time to heat up. It can be done without pain and comfort only with a device with good power.

Ergonomics - the next criterion when choosing

The qualitative work of the master directly depends on how convenient the device is, or rather - the handle-milling cutter. The smaller it has the diameter, the more convenient it is to handle it. The handle should lie comfortably, the fingers should not feel any tension. This will avoid the leakage of the hand. Important and the mass of the device itself, which should be distributed evenly, so that the machine does not outweigh in any direction. The optimal weight will be at least 150 and not more than 200 grams. The weight of such a handle-milling cutter will allow to carry out both fine work related to the processing of cuticles, and more voluminous species. A comfortable handle allows you to control the intensity of pressure on the feet, and therefore, to prevent skin trauma.

Here it is worth mentioning about the cord, which should be long and flexible enough, providing the machine with greater maneuverability.

Nozzles: quantity, quality, materials

No machines for hardware manicure and pedicure are equipped with nozzles for carrying out all necessary procedures. How to choose the necessary and additional attachments? Which of them will be just needed, and with the purchase of which you can wait a little? In the variety of mills the newcomer is easily lost. After all, they have a different diameter, granularity, can be made of different materials. In order for this to happen, it is necessary to understand the purpose of each.

• Ceramic nozzles are the safest form, since the material is relatively soft. They are great for first experiments with manicure and pedicure. The coarse-grained appearance of the nozzle can be used to remove the keratinized skin areas on the feet. Medium grained are suitable for processing cuticles. Fine-grained nozzles are used mainly for grinding nail plates or finishing work with the skin.
• Diamond type nozzles are more rigid in comparison with ceramic material. But he also has more functionality. The large diameter of the nozzle allows processing the free edge of the nail, giving it the desired shape and removing coarsened areas. Nozzles with small diameter and burs serve for processing of cuticles and lateral ridges. The price category for diamond baits is different and depends on the technology of production.
• Carbide cutters are used in the early stages of creating a manicure and pedicure, when it is necessary to remove a large layer of keratinized skin from the heels, an extra layer of acrylic or drill a hard corn.
• Polishers are necessary for the final polishing of the skin of the feet. They are made from a mixture, which includes silicone and fine abrasive. They can be treated with gel and acrylic surfaces, if there are medium-soft polishers available. White nozzle is the final polishing of the nail plate. Natural polishers made of wool, cotton or felt will be useful for creating a deep gloss.

For example, the machine for manicure and pedicure Nail Spa, reviews about which are mostly positive, in a set has 11 baits, capable of transforming any hardened heels. A compact and stylish unit will provide not only a full-time care, but also a couple of minutes for complete relaxation, as in the kit it has a built-in bath.

Before choosing a typewriter for manicure and pedicure, the method of fastening the cutters should be clarified. There are devices where to replace the milling cutter you need to use an additional key, which is very inconvenient in the salon saving time. When choosing a unit for home use, this criterion will not be decisive, since it has no effect on the parameters of the work, but it can save some money.

Reliability of apparatus

This is one of the important criteria when buying a device. The machine for the hardware manicure and pedicure in the cabin must necessarily be reliable. Not all models are able to withstand constant work for a long time, meaning not days or even weeks. In order for the device to justify its hopes and invested funds, it is necessary to choose machines from manufacturers whose product quality has already been verified in practice. This is the kind of machine for manicure and pedicure Nail Spa, which is a whole system for creating excellent quality manicure and pedicure. The built-in spa bath not only provides cosmetic care, but also makes the skin of the hands and feet well-groomed and beautiful.

Optimal size

Before choosing a machine for manicure and pedicure, you should pay attention to its size. Neither at home nor in the salon there is room for a huge aggregate that occupies the entire table. In the salon on the table, the master, in addition to the typewriter, usually has a large number of other items necessary for the procedure. Well, a very small main unit can become an obstacle to proper cooling of the unit, which will result in its rapid overheating and shutdown.

A few additional criteria

The machine for manicure and pedicure can be equipped with some additional functions. For example, there are models that are additionally equipped with a vacuum cleaner, which sucks the exfoliated areas of the skin in a special container built inside the main unit. This allows you to keep the workplace clean and tidy at all times.

Some of the more expensive units may have the ability to adjust the speed and reverse, implemented and delivered on a separate unit. You can turn it on and off using the pedal.

A real find for home use will be a model with a built-in lacquer drying. For this function, many girls are ready and pay extra.

Mastering Technology

As it turned out, to choose a machine for manicure and pedicure is easy, if you know what to look for first. Having already at least some idea of what and how it looks, you can safely go to the store for a quality and convenient assistant.

The next important step will be familiarization with the instructions attached to the device. It will be sure to describe at what speed it is necessary to process this or that area with this device, which nozzles are better for polishing nails, heels, callouses.

It will be very useful to get acquainted with the video materials at home when you start working with the device, where professionals in their master classes will show you how the procedure is being carried out, which is where you start, because the hardware manicure has many differences from, for example, classic edging. The more theoretical information will be learned, the more useful the machine will be, and the faster the expectations will be justified.

The rules of work with the machine for manicure and pedicure

He knows how to choose a typewriter for manicure and pedicure, a professional manicurist because of his vast work experience. Machines are simply irreplaceable for people with puffing, ribbed, damaged, sick nails, with dry skin.

Manicure and pedicure, made with the help of a typewriter, is the maximum comfort and careful care for feet and hands. Special cutters, polishers and burs are designed to get rid of cornified skin, calluses and corns with high quality, quickly and without pain. Safety guarantees a radically different approach to the procedure, in which the dead cells are not cut off, as in a traditional manicure or pedicure, but simply polished. This is what makes it possible to handle even the most delicate areas of the feet between the fingers. The absence of the need to steam the skin, as the whole process is carried out on a dry skin, makes the hardware manicure affordable for people with diabetes.

It is fair to say that some people still avoid the hardware manicure because of fear of damage or bloodletting, which, by the way, can occur even with any other kind of manicure, if the master is caught with insufficient experience. What can go wrong with the hardware manicure? The very first mistake that masters make is the insufficient rotational speed of the cutter. The small speed does not flake, but tears the fabric, while the higher one leaves a smooth trace, making the procedure more qualitative.

Another reason why a customer can receive any damage is due to the incorrect position of the hands, head and body of the master in relation to the client. It is necessary to work and locate the device so that there are no "blind" zones. The place of treatment should not be covered either by the hands of the master or by the machine. At the hand holding the handle-milling machine, there must be an anti-support.

When performing a hardware manicure or pedicure, the client should not experience any pain in any case. They can arise in the event that the master, treating the legs, removes the "extra", that is, there is a deeper than necessary, polishing the tissues. The sensation of pain can occur immediately, and may manifest itself in the days following the procedure. Removing keratinized areas should be moderate, constantly controlling the thickness of the skin.

Pain can be from a skin burn or nail. More often it happens when working with a large milling cutter. This is due to the fact that the large diameter of the nozzle has a higher rotation speed, and if you stay in one place a little longer, you may get a burn. The pain, of course, will be sudden, the client will tense up and be on guard throughout the rest of the process, and the master's task is to achieve the maximum relaxation of the person in the chair. To avoid burns, the master must constantly move the nozzle over the surface of the foot, not for long staying in one place.

Another factor, which causes inconvenience, can be too much pressure by a milling cutter on an already painful area. But strong pressure is just a consequence of the small speed of rotation of the nozzle. If the speed of the cutter is insufficient, sometimes little or nothing is polished, and due to the pressure the wizard tries to eliminate this problem, but in fact, you just need to increase the speed of rotation.

Care of the device

Proper care of the device will ensure a longer service life. Any machine for hardware manicure and pedicure (expert reviews confirm this) requires:

• Disinfecting attachments in a special tool before starting work;
• Flushing the nozzles under running water or by cleaning in a sterilizer after completion of all procedures;
• Neat attitude to the nozzles and to the process of their replacement, especially if this should be done with the help of a special key, which must be used in order not to damage the fastening;
• Removing particles of skin and nails from the handle-milling cutter.

From all of the above, we can conclude that before choosing a typewriter for manicure and pedicure and buying it, you should determine the purpose for which the device is purchased, for how long, in what conditions is it planned to work, and with the amount you Ready to spend on the unit. And certainly not standing in the field of beauty industry will provide you with a wide range of machines that meet your requirements.