Hotmoke (gun): how to choose? Tips and Tricks

If you still do not have a glue gun, then maybe you should think about buying it. This tool can be called a very useful thing, but before you make a purchase you need to understand the technical characteristics of this equipment, as well as determine the main selection criteria. The described instrument can be called popular without exaggeration and reservations. If you need to use hotmelt, a gun for it can be purchased, it does not need advertising, it does not need to be agitated, many home masters and professional builders have already had time to evaluate its advantages by registering this device in its arsenal.

The glue gun is not a basic equipment, but it is very useful. Among the additional advantages should be distinguished simplicity of design, low cost, as well as the ability to perform a wide range of tasks. If necessary, it will be difficult to replace it with something else, with its help it is possible to strengthen engineering communications, glue the details to each other, fill the seams, and seal.

Need to use

Allows instantly fixing different elements of hot melt, the gun heats the composition to a certain temperature, after which the mass is able to freeze for 3 minutes or less. After that, the formed seam acquires almost maximum strength, and it is not necessary to wait several hours for setting, as, for example, when working with liquid nails. The melt excellently affects a variety of materials, among them: plastic, glass, leather, wood, metal, rubber, fabric, and PVC. But do not try to paste with a pistol mineral foundation on the type of plaster or concrete. Some difficulties may arise with polyethylene parts. As with other adhesive compositions, the surface must be cleaned of dirt and moisture, stains, and degreasing before starting the mixture from the thermo-pistol.

If there is a need to use hotmelt, the gun for it will have to be purchased, with it you will be able to get a very strong connection that is not inferior in quality to the mechanical fastening. If it is necessary to dismantle, it is necessary to heat the composition, and on many surfaces the mixture will leave no residue after removal. If you compare with other sealants, the described composition, even with impressive layers, can harden completely, to the full depth, and it will only take 15 minutes. Even when hot, the adhesive from the thermo-gun is non-toxic, but you should beware of burns and damage to heat-sensitive materials. After drying, the seam will withstand the effects of moisture, and the spare rods can be stored without loss of performance. When gluing, you will be convinced that working with a thermo-gun is very economical, since spare parts are inexpensive, up to 70% less than comparable size glues. Mass can be dosed as accurately as possible, the waste will be minimized. The tool is safe, ergonomic and easy to operate, suitable for children's creativity.

Tips for choosing a glue gun

Before you buy hotmelt, you have to disassemble the gun according to technical specifications, among them is worth paying attention to the power. The more watt, the faster the adhesive mass will melt, the speed is the main factor of productivity. Specialists advise paying attention also to the capacity of the melting tank. If the heater provides the right operating temperature, and the heat chamber contains the necessary amount of glue, then the issue of power can not be considered.

A power of 300 watts or more is capable of producing pistols of the pro class, but for performing amateur tasks 30 to 150 watts is enough. If the maximum power is not enough, then the master will have to pause to prepare the melt. Since you can not immediately understand if there is enough power to perform certain tasks, experts advise choosing a tool for performance.

What else you need to know about power

Some companies offer tools for sale that allow you to adjust the power automatically. Thus, for the initial melting, the instrument will consume 200 watts, then it will go to the standard operating power, which is 40 watts. In standby mode, the equipment will consume from 14 to 16 watts.

Melt temperature

Not all materials are able to cope with the impact of impressive temperatures, as some of them are quite sensitive. For example, for work with some varieties of polymers, paper or textiles, low-temperature glue rods are used, their melting temperature reaches 105 degrees. For them, you should buy special pistols that work in this mode. However, you can buy equipment with adjustable temperature. On sale it is possible to meet model Dremel 920 which possesses just such level of heating. While another version of this manufacturer - Dremel 930 - is able to work in one of two modes: the first produces 105 degrees, and the second - 165. If you get an average pistol, it will warm up the mixture to 200 degrees.

Characteristics of the gun "Zubr Master" 06850-20-08_z01

Hot-melt gun "Zubr" of the mentioned model costs 500 rubles. It is a universal device intended for gluing synthetic and natural materials. Its power is 20 watts, and the weight is only 0.22 kilograms. This network device does not have electronic temperature control, which is sometimes a very important function. The heating time is 5 minutes, among other things, the equipment is protected from drops. As practice shows, the control is very clear, the gun has a mechanical system of supply and dosage of the composition.

Additional advantages

It is very easy to store equipment, since it is provided with a supporting surface, which allows to install in a stationary position. The tip of the gun has a valve that facilitates work during breaks, the glue does not flow and does not stain clothes, as well as the work surface.

Characteristics of the pistol "Zubr Expert" 06851-80-12_z01

Pistol "Zubr Expert" hot-melt is worth 1000 rubles. And is an equipment in a shockproof plastic casing. The tool is equipped with a valve to prevent leakage, as well as a trigger with a convenient shape. The body is designed in such a way as to minimize the fatigue of the operator, as well as to ensure the quality gluing of various materials. Its power is 80 watts, but the unit is devoid of electronic temperature control. Its weight is 0.4 kilograms, and the length of the glue rod is equivalent to 300 millimeters. The composition is heated in 4 minutes, among the additional benefits can be distinguished from protection from drops.

Recommendations on whether to purchase a glue gun brand "Stayer" 0680-11

The hot-melt gun Stayer costs 300 rubles, its capacity is 50 watts. Protection from droplets equipment is not provided, and the temperature regime is 180 degrees. For the precise application of the composition, special nozzles are used. Among the advantages of the device can be distinguished versatility, a slight time of heating the glue, as well as the use of heat-resistant plastic in the base of the case.

Characteristics of the Yato gun 11 mm 35 (400) W

If you need a device with a capacity of 35, glue gun for hot melt brand Yato you are suitable, it is designed for professional use, so it has the highest quality. This model is an excellent choice for those who are accustomed to performing large amounts of work. As practice shows, the equipment is convenient for long-term use, and also allows the filling of different hot melt. To work, you need glue sticks with a diameter of 11.2 millimeters.

Cost of rods

When you visit the store, you can buy hot-melt glue for a 11 mm gun. The price will depend on the manufacturer. For example, glue Hummer costs 239 rubles., While rods of KWB 5393-06 will cost the consumer 144 rubles. A similar product under the DEXX brand costs 669 rubles.

Recommendations for use

How to use hotmelt with a gun, you should know even before work begins. The first step is to connect the device, installing the glue rod. Only after it is possible to prepare glued surfaces. To feed the composition, the master presses the trigger, and then the attached surfaces are attached to each other. When the glue rod is finished, a new one is installed, it is necessary to press on it, having advanced the previous one.