Homemade Electronic Cigarette: A Manufacturing Instruction

In the modern world, it is not so difficult to create some high-tech equipment that is assembled in factories by one's own hands. A lot of people are able to make the most diverse and interesting devices with their own hands. The main thing is to know what parts of a device consists of. It is also important to understand the principles of work. So you can collect a mobile phone, a washing machine or even a car. Of course, we can talk about an electronic cigarette. "How to make an electronic cigarette?" - the question is not so complicated. In this article we will deal with this. If someone does not want to create an electronic cigarette with his own hands, perhaps this article will help him to repair electronic cigarettes.

Main Components

In an electronic cigarette, there are several parts responsible for its construction. The main components can be called a microchip, a removable cartridge, an atomizer, and a battery. You can purchase these parts on a free sale both in regular stores and in the Internet space.

In addition, there is a need to buy the case itself. You, of course, can do it yourself, but if you buy a case that is manufactured at the factory, then the probability of breaking such a thing as a self-made electronic cigarette will be minimal, and it will look very nice.

A few words about the atomizer

Many beginners to smoke electronic cigarettes wonder: "What is an atomizer?" It is essentially an evaporator for electronic cigarettes. The special liquid is heated (it is in the electronic cigarette itself) immediately to the state of evaporation. This is so: refueling is fed through the cartridge into the evaporator itself for electronic cigarettes, that is, an atomizer. There is a process of heating, which is performed with the help of a nichrome spiral.

In addition, directly beside the nichrome spiral , the wicket-atomizer itself contains a wick, metal, and a ceramic cup. The liquid passes to the wick, and from it - directly to the nichrome spiral, which is placed in a cup made of ceramics.

Components for assembly

Proceeding from this, we need to build such a thing as a homemade electronic cigarette, a nichrome thread, a case for a battery (you can use a flashlight), a wick, and for it it is best to use a silica thread. In addition, you need a case for an atomizer and, in addition, a lithium-ion battery, which has a protective board with a voltage of 3.7 Volts. Thus, an electronic cigarette with its own hands is collected entirely from a small number of parts.

How to make an electronic cigarette?

Asking about how to make an electronic cigarette by hand, smokers should consult the instructions. Let's give it.

In this case, the main direct engine of energy in a self-made electronic cigarette should act as a battery. Most often this part is located in the completely opposite side of the cartridge. A microchip must be installed behind the battery.

It connects the battery and atomizer device itself. But it is important to firmly attach the cartridge to the atomizer. As soon as the tightening takes place, in theory, the battery begins to supply its energy atomizer, and therefore warm it up. As a result, the pre-charged liquid will evaporate. What is needed for this process to be ensured in a self-made electronic cigarette?

To do this, it is necessary to connect the positive and negative contacts of the battery to the suitable screws in the body of the atomizer itself, which, subsequently, the nichrome thread-wire wound around . You also need to install a wick on it. In the case of your purchased atomizer, you need to make a small hole. This hole should serve to suck in air. As a result of all this work, a liquid must evaporate on the spiral, and then it will be inhaled as if it were from a normal cigarette.

Making a self-made housing

In order for your self-made electronic cigarette to look beautiful enough, you will also need to make your own body. As mentioned above, you could buy it in the store, but you can also make it yourself.

Make a cut of some cardboard tube. The incision must pass along the entire length. Now set the diameter of your tube. It should be such that the batteries can be inserted without much effort. Then set the length of suitable batteries, and then draw a loop from the bottom of the wire and tighten it to the bend bracket or glue. In conclusion, you need to wrap the upper part of the tube with an elastic band.

You can install the battery in the made tube. To it you from the very beginning have connected a wire so that the minus has been directed downwards. The wire itself needs to be installed in a special way. Its clamp should protrude from above from a cardboard flask. You can fasten the clip using an elastic band. Install the remaining batteries in the housing in the same order in which you installed the first battery.

Where to find the liquid?

In order to create such a thing as a full-fledged electronic cigarette, with your own hands, you will also need a liquid for your device. It is necessary for this to acquire a special basis for refueling. The composition of this mixture includes: propylene glycol, which can optionally replace vegetable glycerin, distilled water. If the owner of the device is interested, the composition of the liquid may include nicotine, but the self-made electronic cigarette, as well as the present one, allows a person to smoke without using nicotine, or using it at a minimum.

In the shops you can find a wide range of fragrances to choose from. Of course, for this you will need a specialized store, which is extremely convenient to find on the Internet if it is not in your hometown. With the help of fragrances, the smoker is given the opportunity to create his own recipes for electronic cigarettes, changing the proportions of those or other components, mixing the liquid in those versions that, in fact, the owner of the cigarette prefers.

Advantages and Precautions

The main advantages of electronic cigarettes are that there are no tar and carcinogens, and the fact that the cigarette does not burn when smoking, without isolating about four thousand chemical compounds and not being a threat of a fire. In addition, it does not pollute the environment, operates over a wide range of temperatures, and the temperature of the smoke itself is close to that of the human body.

The electronic device uses an electromagnetic screen, and as a result does not produce any electromagnetic radiation. In addition, as mentioned above, there is very little nicotine in it that harms people. In each of the containers it is liquid in less than 20 most ordinary cigarettes.

It is extremely important to remember that even electronic cigarettes are by no means suitable for children under the age of 18, and also generally for people who do not have the habit of smoking. In addition, if a person is allergic to nicotine or any of the direct components of the aerosol, then he should not use this device.