Glue "Liquid lamella" for PVC: reviews

Quite often, modern consumers try to save money, so if the inflatable boat is damaged from polyvinyl chloride or shoes, they resort to repairing the products. An excellent solution for this can be the "Liquid Latte" tool for PVC, which you can read about below. This material is also suitable for inflatable mattresses, but it is polyvinyl chloride, contained in a solvent.

Reviews about the main features

According to consumers, "Liquid Latte" is fairly simple to use, it is safe for human and animal health, and is environmentally friendly. To repair the boat it will only be necessary to degrease the surface, and after shaking the tube and open it.

According to consumers, the product should be applied thickly on the damaged base and wait until the mixture dries. On sale, you can find a "patch" in several colors, so it is considered a universal product, because you can use the material for different products. As the buyers say, repair with the help of this tool can be done quite easily and quickly.

Feedback on the main advantages

If you are interested in "Liquid lamella" for PVC, it is recommended to read reviews about it first. Consumers claim that with the help of this composition you will be able to save money. This factor is due to the fact that similar materials are much more expensive. Among other things, the consumer saves time, because repairs can be done in a matter of minutes.

"Liquid patent", according to customers, is quite easy to acquire, as the company has a huge dealer network. On sale, you can find the material in a wide range of colors, which is why it can be selected for almost any surface application. Due to ease of use, the product can be used at home. Among the primary colors should be:

• Marshy;
• green;
• red;
• yellow;
• blue;
• Light gray;
• white;
• the black;
• purple;
• dark Grey.

Additional Properties

Before using the "Liquid Lacquer" adhesive for PVC, it is advisable to read it about it. In them, consumers mention a rather high adhesion. The composition penetrates into the outer layer of the surface, creating a strong bond and increased bond strength. The material is resistant to ultraviolet rays. This advantageously distinguishes it from adhesives, which can become covered with cracks and exfoliate from the influence of ultraviolet.

Consumers also like the fact that the composition is 100% penetrated inside the repaired product, thereby updating PVC. This indicates vulcanization. Generally speaking, about such a tool as the glue "Liquid lamella" for PVC, the reviews are quite good. In them, consumers also mention elasticity. The main material after the application of the adhesive retains its properties, even in severe frost the products do not lose their flexibility. The properties of the material are also unique. It is the same polyvinyl chloride, only in liquid form. Consumers especially emphasize that the material remains resistant to bends, scratches and ultraviolet light. It is as strong and elastic as possible.

Why choose a "Liquid Lacquer"

Glue "Liquid lamella" for PVC, reviews about which you could read in the article, is also suitable for inflatable pools, awnings and other products. According to consumers, after eliminating damages, inflatable products do not get worse or better than they were before repair. In short, the work will not affect the new punctures and gaps.

Unfortunately, today, manufacturers began to forget about the performance of the products. This question is frankly ignored today. As the buyers emphasize, it has long been proven that glue is an aggressive polymer that can destroy the base of the fabric when exposed to ultraviolet light. As a result, using a low-quality product, you can simply spoil the product to be repaired.

It follows that the glue produced by an unscrupulous manufacturer may pose a danger to the damaged material. "Liquid lamella" for PVC boats, reviews about which will be useful to the consumer, is a completely new product. On a molecular basis, it eliminates almost any defects.

Reviews about the features of use

The adhesive described is an innovative product, but you can expect a positive result only if it is used correctly. According to the buyers, it is possible to apply the product after repair only after waiting a day or two after applying the glue. However, the maximum strength of the composition will reach only after 10 days. The final time will depend on the temperature of the environment.

Adhesive for PVC boats "Liquid Latte", reviews about the experience of using which are useful not only for home masters, but also for specialists, should be used at a positive temperature. The mixture contains not only PVC, but also active reagents. First, the surface to be repaired should be well degreased, and the contents of the tube must be shaken well. Only after that, it is possible to apply the patch to the defect site.

Buyers are advised to pay attention to the fact that the cut must be processed according to different technologies depending on the size. If this parameter does not exceed 3 cm, then no additional measures should be taken. While if the cut is more than 3 cm, then it should be sewn with the help of needles and thread in the first stage. The product after gluing can be used only after a day.

Temperature mode of use

"Liquid lamella" for PVC, consumer feedback about which indicates a positive result, should be used in well-ventilated rooms. The temperature should be 15 ° C or higher. Work should be away from direct sunlight. Keep the composition recommended in a cool dark place, away from children. The mixture is flammable, so use it far from the fire. The gas vapor is volatile. The composition freezes at a temperature of -16 ° C.

Conclusion

On sale today, you can find material that was developed by Russian experts in conjunction with experts from a foreign company of polymer materials. As a result, it was possible to get a new product, which at the molecular level is able to eliminate almost any defects on products made of PVC-fabrics.

"Liquid pan" for PVC is a suspension that quickly dissolves the top layer of the element and restores the material to its original state. At the same time, all the necessary properties of the product remain at the same level. During the chemical action of the material on PVC, the structures are mixed, but after drying, it is possible to obtain a chemically welded monolithic compound.