Glasperlenium sterilizer - guarantee of safe manicure procedures

The key to safe manicure is sterile instruments. Today, two types of sterilization devices are used: glasperlene and ultraviolet. Glasperlene sterilizer is most often used for gentle and rapid processing of a large number of instruments of small sizes. Since this equipment appeared on the market recently, the cost of large models is very appreciable, so only elite beauty salons can afford them. But compact sterilizers are quite affordable and have already earned popularity among ordinary nel-masters.

Glasperlene sterilizer for manicure tools: advantages

Instruments for sterilizing manicure instruments quickly won the market, and this is not accidental, because before they appeared all the devices used for processing and nail extensions, masters had to soak for a long time or boiled in disinfectants. This method of sterilization negatively reflected on the tool, causing corrosion, blunt edges and deformation. And outdated types of heat sterilizers were rather cumbersome and consumed an impressive amount of electricity.
Glasperlenovy sterilizer has very compact dimensions - the largest model is not more than an ordinary microwave oven. In addition, qualitative disinfection of scissors, tweezers, cutters, needles and other tools can be done in a matter of seconds.

Glasperene Sterilizer Device

The dimensions and design of the instruments may vary, but any glasperlenium ball sterilizer operates on the same principle, since disinfecting flasks have the same structure.

To produce the flask, heat-resistant metal is used, and the body is made of plastic. The flask is filled with small quartz glass beads , which is characterized by a fairly high melting point. This property of quartz allowed it to be used to fill the sterilizer.
The metal flask is surrounded by powerful heating elements, which, when switched on, heat it strongly. Together with the bulb, quartz balls are heated up to a temperature above 240 ° C. Under such conditions, all bacteria, fungi, complex viruses and other microorganisms quickly die.

The sterilization process

Using a glasperlane sterilizer, you do not need to do any preparatory work before sterilizing the instrument. It is enough just to turn on the device and wait about half an hour while the balls are warmed to the maximum temperature. After that, a disinfection tool is immersed in a quartz flask. The maximum processing time is 30-40 seconds. It should be noted that the glasperlene sterilizer can only be used to clean metal manicure tools, because plastic or other high temperature materials can not stand.

Additional requirements

Despite the ease of use of the device, it is necessary to comply with some requirements for improving the quality of sterilization. The power of a small device is 75 watts. Heating balls in it is 30 minutes, but over time, the balls are reduced heat conduction, which is why they can not warm up to 240 ºС. In this regard, it is recommended to completely change the quartz filling every year.
Before the sterilization process, the instruments should be thoroughly cleaned, then washed in a disinfectant solution. To prevent damage to manicure objects, place them in the sterilizer in a dry form. It is recommended that thermal disinfection be performed immediately before using the instruments.

Glasperlene sterilizers are a reliable protection from infection with all sorts of dangerous diseases, as well as guaranteeing the quality work of the master.