Garden bench made of wood with own hands: drawings. Garden benches with their own hands made of metal and wood

Garden bench made of wood, made by hand, can be an excellent addition to the exterior of the villa site. It will be aesthetically pleasing and comfortable to use. Some people buy similar furniture in the corresponding shops, but if you decide to do this, you will understand that it is very difficult to find a bench in terms of dimensions and design. For this reason, it is recommended to make such a design in-house. The instructions below will be useful to private home masters as well as professionals.

Preparation of the basic set of materials and tools

A garden bench made of wood by oneself can be performed only after the master has managed to prepare the materials and tools listed below, without which the work will be impossible. Thus, you will need to prepare:

• Screwdriver;
• drill;
• A circular saw that can be replaced manually;
• Centering bit ;
• A chisel;
• Grinding machine;
• a hammer;
• pencil;
• Gon;
• level;
• Roulette.

It will not be possible to provide a firm fix, if you do not use glue intended for working with wood during the work. It will take a primer. The bench after manufacture can be painted, for which it is necessary to use the appropriate composition, which not only ennobles the appearance of the wood, but also makes it more resistant to external manifestations. Do not forget that it is useful and putty. But in order to make the pores closed, you need to buy a composition that promotes this.

A garden bench made of wood should be treated with sandpaper by hand , use one that has a grain size of 120. For fixing, self-cutters with a length of 5 and 6.3 cm should be used.

Preparation of material for construction

It will be necessary to prepare four bars, the dimensions of which are equal to 5x10x244 cm. And also a pair of bars with dimensions equal to 2.5x10x244 cm. One more bar should have dimensions equal to 2.5x5x244 cm. After you can prepare the above-mentioned elements, one should cut out of them Smaller, the dimensions of which will be presented below. To do this, use a circular saw, but you can also handle the work with a hand saw, but the process will be somewhat longer.

Cutting out parts of a bench

A garden bench made of wood (with its own hands to make it quite realistically) will have four legs, the size of each of which is 5x10x42 cm. There will be two wooden pads. The size of each is 2.5x10x5.7 cm. The edges of the frame must also be made in two copies with a size of each 2.5x10x15 cm. The spacer must also be two (5x4x30 cm). The sides of the frame (2 pieces) should have the following parameters: 2.5x4x155 cm. Also you will need as many internal partitions of the frame with dimensions of each within 2.5x4x24 cm. But the supports need to saw out five pieces, their dimensions are 2.5x5x24 cm. , Which will form the basis of the seating structure, there must be four, their dimensions are equal to 5x10x165 cm. At the end, you can also cut edge boards in the number of two pieces, their size should be equal to 2.5x10x35 cm.

Recommendations for manufacturing

Before you make a garden bench of wood with your own hands, you need to think whether it will be used in tandem with any table. This is important for the reason that the bench should be in harmony with the rest of the furniture in the garden. In order for the shop to look in general exterior, its surface after production can be painted under the color of the rest of the furniture on the garden. After the master has cut out all the elements, among which you can select the legs; Seating; Beams under the frame, etc., you need to perform work to clean the surface of all elements to rid them of roughness and chips, use the sandpaper necessary.

Technology of benches assembly

If you are thinking about how to make a garden bench of wood with your own hands, then at the first stage it is necessary to tackle the legs. In the process, the master should try to take care of the stability of the structure. To do this, it is supplied with spacers. Using a chisel, it is necessary to make in uneven bars, which are intended for making legs, notches. In tandem with a chisel, you should use a hammer. Each leg has two bars, which are fixed together with glue, designed for working with wood. In addition, for a stronger connection, you need to use a mechanical fastener - self-tapping screws. The grooves must be made in such a way that their depth is equivalent to the thickness of the bar of the foot. At the next stage, it is necessary to proceed to fastening the gaskets, which are installed on the inner surface of the legs. Use in this case you need self-tapping screws, the length of which is 5 cm. In addition, the details are attached to the adhesive composition.

Fixing plates to gaskets

When a garden bench is made of wood with own hands, the drawings of which are presented below, in the next step you can proceed to fastening the spacer plates. In this case, you should also use a mechanical fastener and glue. The length of the self-tapping screw should be 5 cm

Work on spacers and frame

Now you can strengthen the legs between them, using spacers. Use the same self-tapping screws and glue. Then you can fix the frame. To do this, a pair of 155-centimeter bars and a pair of 24-centimeter boards should be fixed with screws and glue. In this case, the master must always use a square that will ensure that the elements are positioned correctly in relation to each other, as for the bars. Spacers must be installed, and then fixed with screws and glue to the lower edge of the main frame, this will ensure the stability of the frame.

Fixing of legs and seat boards

Making garden benches and benches made of wood with their own hands, the next step is to start fixing the frame to the legs. Now it is necessary to use self-cutters, the length of which is 6.3 cm. The fastening is additionally carried out with glue. Install mechanical fasteners must be extremely accurate, this will eliminate the possibility of damage to the bar, whose body can simply be split.

In order to be able to properly install the seat boards, you must first determine the center of the supports, and then attach them. If you make blind holes, then the seat of the structure can be mounted separately, only after having occupied the attachment to the frame. When a garden bench is made of solid wood with your own hands, the diagram-drawing of which is presented in the article, it is necessary to make grooves between the boards minimal, to ensure that the boards are close to each other.

Work on edge boards and decoration

Only now you can deal with edge boards. They need to be screwed with screws to the legs of the structure. But if you make blind holes, then it will be possible to strengthen the edge boards at a distance of 6 cm from those that lie at the base of the seat.

The garden bench with its own hands from solid wood should be finely finished in order to protect its surface from the negative impact of the environment. Initially, the product should be rid of burrs, should not be on elements and chips, for which the design should be well sanded using sandpaper. The holes that remain after the installation of mechanical fasteners must be filled with puttying compound. After that, the wood must be treated with a filling compound. This not only protects against moisture, but also from drying, the last of which can cause a violation of the original size of the bench. For high-quality application of paint, the wood is pre-treated with a primer. After it has dried, you can start working on applying paint. In this condition, the bench should be left for the time that is necessary to dry the paint, only after the bench can be started to use.

Of course, an excellent option is a combination of wood and metal. Garden benches with their own hands made of metal and wood are obtained not only aesthetically, but also durable, but in order to make a bench made of steel, you must have the skills of using a welding machine.