Drawing of liquid wallpaper by own hands

If you decide to make liquid wallpaper yourself, you first need to familiarize yourself with the technology of work, which involves a preparatory stage. This material is a kind of decorative plaster. In order for the wallpaper to have an attractive appearance, they add fillers, as well as dyes, it can be granules or sequins. For fixing, the KMS glue is applied, it is usually used for working with roll wallpaper. By the method of application, the liquid wallpaper is close to the decorative plaster mixtures.

Tools for work

If you decide to apply liquid wallpaper by hand, then you will need a trowel or spatula. This indicates that you can work with the composition by different methods. As the main advantage of such a mixture is the possibility of applying it to the base of any, arbitrarily complex shape. Wallpaper can be combined and formed applications. The role of the minus is their significant value. When calculating the estimate, it is necessary to take into account the material consumption: one package will be enough to cover about six square meters of surface.

What you need to know the master

If you decide to apply liquid wallpaper yourself, you need to know that there is one more minus of similar mixtures, which is expressed in the fact that after drying the mixture, all the errors of the wall will be visible.

Preparing the surface before applying liquid wallpaper

The uniformity and evenness of the surface is the main requirement to the base, among other things, the wall should absorb water as little as possible. You should provide a white background or a shade that matches the color of the wallpaper itself. The surface should not have changes, potholes, and also depressions more than three millimeters per meter on the surface. If you decide to apply a liquid wallpaper with your own hands, making a master class, presented below, will allow you to master.

Initially, it is necessary to remove the surface from the old coating such as painting or wallpaper, as well as plaster. This is necessary in order to exclude detachment. From screws, nails and screws it is also necessary to get rid by removing plastic elements from the wall. If there are finishes on the surface, pipes, they must be well sealed. To do this, you can use the putty, which is laid down a layer of two millimeters. If possible, it is recommended to cover with oil paint.

If there are external flaws on the wall, the surface along the entire length is covered, then the use of textured plaster may not. It must be remembered that a complete leveling with plaster can be very expensive, so you should count on your possibilities. The application of liquid wallpaper with your own hands can be accompanied by a significant expenditure of material, if not get rid of the protrusions and depressions. Specialists recommend pre-coating the whole surface with putty or gypsum composition. This is relevant for partitions and plasterboard walls.

Padding

It will not be enough to get rid of only the joints between the canvases. After the surface has been leveled, it should be well primed. To do this, use a deep penetration composition, which is applied in three layers, between each of them a period of 3 hours is maintained. Only after this you can proceed to the application of a thicker putty, which acts as the basis for liquid wallpaper. You can use water-based paint or facade composition for this. Each of them must be white, the addition of color should be deleted.

Preparation of the formulation

If you decide to apply a liquid wallpaper yourself, make the composition before starting work. Virtually all types of liquid wallpaper are prepared at the stage of priming the walls. Depending on what mixture was purchased, its preparation may differ in technology. It can be a mixture packed in one package, or a composition that is distributed among the components in different packages. The dry mixture must be poured into a container or a piece of polyethylene, the size of which is 1 x 1.5 meters, and then thoroughly mixed.

Before you make a liquid wallpaper with your own hands, you need to consider that in a dry form the mixture should be well mixed, which will prevent the formation of lumps. If you plan to use decorative additives such as sequins or granules, it is better not to mix them in dry form with fibers, as well as glue. They are recommended first to pour into the water, then mix, and then proceed to add the wallpaper base. This will ensure an even distribution of the composition.

Recommendations for kneading the composition

If you decide to use a liquid wallpaper, you need to make your own production using a certain technology. First, the volume of water should not exceed that recommended by the manufacturer. Secondly, it is necessary strictly to withstand the sequence of actions: in the prepared container it is necessary to pour water, and after add a dry mixture.

Mixing must be done in such a way that the entire package is used at a time. You can not mix only a part of the package. Stir the solution recommended by hands, no corrosive to the skin components in the mixture is not contained. If you use a drill for this, then this approach can negatively affect liquid wallpaper. After the mass is impregnated with water, it must be left for a while. Manufacturers advise that the composition remained intact from 6 to 12 hours. Only then can you mix all the proportions. If the application on one wall is made from different mixtures, then a transition may be noticeable.

Council of the master

Before you make a liquid wallpaper with your own hands, you need to take into account the fact that, as a rule, the consumption of the composition in practice is greater than that recommended by the manufacturer. Thus, the number of purchased packages is preferable to buy at the rate of one package per 4 square meters. It is recommended to purchase two packages more, as a result, they can be used for repair.

Features of application of composition

After the composition is ready, you can start applying liquid wallpaper. The walls must be completely dried after priming. If you will be applying liquid wallpaper with your own hands, reviews about which are often quite positive, then it is permissible to use a grater, a trowel or a spatula. The working surface of the latter can vary from 18 to 80 cm. Great for this and a spray gun. For this material there are trowels that have a narrowed web, often they are made of transparent plastic, which allows you to control the process of smoothing. The latter helps when making all kinds of applications from different types of wallpaper.

The process, which involves the application of liquid wallpaper with your own hands, is similar in technology used in the application of putty. You can type the solution with your hands or with a small spatula. After that, put the portion on the wall, and then grind it. The master must obtain a layer whose thickness is 3 millimeters. The application should be made in small areas, adding new portions to the applied area. If the solution is poorly attached to the wall or is characterized by excessive density, it is possible to add a certain amount of water, not exceeding one liter per serving.

When liquid wallpaper is applied by yourself (the master class will help you understand the peculiarities of the work), the grater should be located not flat against the wall, it needs to be raised 15 degrees relative to the surface. The effort should be significant, so it will be easy enough to distribute the layer until the required thickness is obtained. After you can fill one square meter, a grater, which is pre-wetted in water, you can level the area to prevent the formation of furrows and lumps. Then you can proceed to fill the next section of the wall.

Finally

Before you make a liquid wallpaper with your own hands, you need to take care of the availability of all tools and materials. Then you can proceed to the study of technology, which is presented in this article.