How to make an appliance for collecting apples with your own hands

When it is time to collect fruits from tall trees, the most beautiful and ripe ones are so high that even with the help of a ladder they can not reach them. Of course, in doing so, you can use a long stick with which to knock the fruit. Some gardeners shake the trees, but the apples are damaged and lose their attractive appearance. As an alternative, you can use a device for collecting apples. If it is not at hand, and the purchase does not want to spend money, then you can make such a tool yourself in a short time. As a result, it will be possible to obtain a fruit picker, which will not differ in efficiency of use from what is produced in the plant conditions.

Selection of design features before production

If we consider the fruit pickers, then they can be divided into several groups. The first of these is a tool that is equipped at the end of the bar with cutters. With the help of this supplement, it is possible to cut the peduncle, and the apple will fall into the container, which is located in the immediate vicinity of the cutter. Such a device for collecting apples has a movable knife, which is activated by means of a special traction. To work with such a device is quite tiring, as the cutter is located on the bar, or rather, on its long shoulder. This creates an extra weight, which is quite decent. The device for collecting apples can refer to the second group, whose instruments resemble a mechanical arm equipped with fingers. The latter are made of wire. After the apple or pear is caught with the help of special fingers, the latter are clamped by traction, and the fruit is in the container. This action is performed using traditional twine. This is what allows you to tear off the fruit. As a minus of the given tool it is possible to allocate that together with a pear or an apple the branch itself can break off.

The third group of fruit pickers

If you are going to make an appliance for picking apples, then you can take as a basis the third group, which is the most common for design features. Such constructions are made of elastic light plastic or fabric. And the shape of the product is a bowl, equipped with petals. A special container must be attached to the wooden pole. Apples are removed with a simple rotation of the pole around the axis, which is oriented along. The leg is then trimmed by means of the petals of the instrument.

Preparing for the production of a fruit picker

The appliance for picking apples from a tree should be made only after you have chosen one of the suggested ideas. The third version will form the basis of the simplified construction of the instrument for fruit assembly. First you need to prepare a plastic bottle. If you want to collect quite impressive in size fruits, then the volume of the container is within 2 liters, whereas for medium-sized apples or pears, a bottle with a volume limited to 1.5 liters is suitable. Each summer resident will certainly have such bottles available.

Process technology

If you will carry out the device for collecting apples by hand, then the bottle should be cut off the bottom, and then make a corner cutout. Use this will be convenient as a knife, and scissors. The above-described cut along the bottle can also be made on the opposite side.

After the bowl has been prepared, it must be attached to the pole, the last of which can be a long light rake. Fixation can be carried out with the help of a wire or a self-adhesive adhesive tape. After that, we can assume that the fruit picker is ready for operation. To use it, the tool must be brought from below the pear or apple, and then rotated around the axis. This will cut the stem of the fetus with a cutout that is located on the instrument. The apple will be in a bottle, which is simultaneously capable of performing the role of a collection tank and a cutter function. A similar device for collecting apples from a plastic bottle can be used without lowering the container for some time. In one bottle can fit a few fruits.

Making a fruit picker from a bottle and fishing line

Before you make a device for collecting apples, you need to determine the design features of the future tool. The basis can lie still the same plastic bottle, a handle from a mop, which is sometimes replaced by a PVC pipe or a ski pole, as well as a fishing line. The length of the latter can vary between 2.5 and 3 meters. You will need scissors and an awl.

Manufacturing process

First, you will need to make a so-called suffix, which is made from a plastic bottle. The bottom of the container must be cut in such a way that a similarity to the crown is obtained. In each petal, two holes are made, for this you can use an awl or hole punch. In the next step, the product should be given tenacity. To do this, a fishing line is used, which is pulled through the neck into the container in such a way that its upper end passes through each hole in a circle. Lead the line back through the neck. This will get a bottle that is devoid of a bottom. Two long ends will come out through the neck.

The next step is to fix the holder, in whose role a full PVC pipe should be used. Double line from the bottle must be passed through the hole of the holder, withdrawing from the back side. If the squeegee handle has a removable handle, then this is a good solution. To this part of the holder it is necessary to fix the ends of the line. In the handle, two holes are made, into which the line is cut, the ends are fixed on the other side in a pull. The handle is then again put on the handle. If you are making devices for collecting pears and apples, it is important to assemble the entire structure in such a way that the plastic bottle is tightly attached to the holder. Cropped edges of the bottle bend. In this case, you need to make grabbing movements. This is the principle of collecting fruits with this tool. If the squeegee is devoid of a removable part, then its end must be eliminated, while it should retreat 10 cm. On the sides, you need to make two holes where the ends of the line are passed. After they need to fix among themselves, and then bind.

Recommendations of an experienced summer resident

For a PVC pipe, several caps from bottles can be used as a handle. If you use ten covers, having done in the central part of each hole with an awl, then the free ends of the line can be passed through the caps, fixing them on the last. For the stability of the lids, you need to glue them together or make a knot by placing it on the inside of the first lid. This will make it possible to get a fairly convenient removable handle made of caps. At the same time, it is necessary to use the same technology as in the case of a squeegee handle.

Conclusion

If you decide to make a device for collecting apples from the ground, then you can use one of the technologies described above. However, it may be necessary to place the bottle not along the stick-holder, but at some angle. This will allow collecting up to four apples in one container, depending on the size, and afterwards pouring out their bucket. One of the listed devices is simple enough to make independently. For this, you do not even have to visit the store in order to purchase materials.