Do you know how to stick a film on the phone?

We all want things that have to be bought to be as cheap as possible, but at the same time they were of a sufficiently high quality. Of course, there is no point in denying the rule that the price of a quality item can not be too low, but experience shows that in many cases a compromise is still possible. So, many owners of mobile communication devices know very well that in time pasted film for the phone screen not only reduces the wear on the front side of the device, but also protects from the need to purchase a new mobile phone.

If expensive models use a durable glass coating, scratch-resistant, the budget lines can not yet boast of such: the screen plastic with active use or not very careful handling is covered with scratches. If you immediately glue the protective film on the phone, then the load will fall on it. Will only periodically make a replacement. To the merits of such a protective coating can be attributed the unobvious fact that if the phone falls accidentally, the film will protect from the appearance of a notorious grid of cracks.

Preparation

Although at first glance, how to stick a film on the phone, there is nothing complicated, in fact, everything is a little different. When gluing without proper preparation, dust, villi, air bubbles remain between the film and the plastic of the screen, which damage the appearance of the apparatus. Therefore, you must first clean the screen thoroughly. This operation is recommended to do with the help of special dry napkins, which usually come complete with a film (you can also use tools for cleaning LCD monitors). People who do not even know how to stick a film on the phone should remember the rule that scraps of cleaning cloth are of little use (with rare exceptions), since they usually contain a significant amount of dust themselves. So, the task is to remove all kinds of pollution. Sometimes it is recommended to stick a film in the bathroom, where there is less dust. However, this is at the discretion of the owner.

How to glue a film on the phone

After preparation, you can start sticking. A new film is always supplied on a basis. It is necessary to arrange it so that the adhesive side is transferred to the screen. To do this, attach the film to the top or bottom of the display and pull a little at the angle indicated by the angle (tab). A transparent, sticky layer will stick to the screen. It must be smoothed with a tissue to remove air bubbles. And so on to the end: a little pasted, smoothed, etc. The film should only be on the screen, without touching the plastic body and the institution in between the surfaces - in these places it will begin to peel off after a while. The main thing is that the display does not have any dust or lint, since they can not be removed without re-gluing. Air bubbles, which can not be thrown out by smoothing, will disappear in 2-3 days. Usually, when buying such a protective coating, an instruction is provided on how to glue the film to the phone. It is necessary to familiarize with it.