Carport for the machine with their own hands. How to make a carport?

Quite often there are situations when a garage seems to be necessary on the site, but for its construction there is no place, no extra funds. However, the protection of the vehicle is needed, and therefore you can make a canopy for the machine with your own hands. It is not only profitable, but also convenient.

Simplicity of installation is the main advantage

Today canopies are very popular. Firstly, this construction is distinguished by its simplicity of construction, and therefore it is possible to build it independently. Secondly, for its erection does not require a foundation, and therefore, there is an opportunity to save, because it is spent on it the principal amount. Third, the canopy for Machines can be built very quickly, literally in a week. Well, fourthly, even such protection for the car is quite enough, and for a summer residence, for example, it's just an ideal solution. It is noteworthy that for the erection of this generally light building, you do not need to spend a lot of money on the purchase of building materials.

Where to begin?

Any construction process should start with a thought-out project, because even the simplest canopy for the machine should be created with the mind and on the basis of correct calculations. First, you need to draw a drawing of the future structure, because it will be the framework for all the rest of the work. It is better if it is compiled professionally - so many defects and problems can be avoided in the future. Secondly, after thinking through the design work, you need to correctly calculate the amount of material and make an estimate. Well, the last point - directly buying building materials and tools.

Cooking place

Preparatory work is an important stage, as to make a carport Correctly without them is simply impossible. So, it is necessary to determine in advance the place where the building will be located. Align this place on the site, take into account such nuances as the course of the sun, the direction of the wind, the depth of groundwater and so on. These nuances will allow to erect a building that will be reliably protected from many natural factors. After all the above work is done, you can begin to build a frame.

What can I make a canopy?

Many owners of private houses are accustomed to perform work on the site themselves. And they are familiar with small forms of architecture not by hearsay, as practically on each country site there is a gazebo created by own forces. Choosing how to build a carport, you must first determine the material. For example, polycarbonate is very popular for these purposes: it is laid on the base of the roof, which is prepared in advance, and fastened with special fasteners. Its peculiarity is that it protects polycarbonate from cracking, expansion or narrowing due to the effects of temperature changes, leaks and so on.

Carport polycarbonate car is good because it is inexpensive, practical in terms of operation - for a small building is the most optimal solution. At the same time, it needs to be laid accurately, correctly, and therefore professional help never hurts. A small mass of material is sufficient to securely anchor the frame. In this case, the canopy is protected from gusts of wind and loads on the base.

Metal: is it worth it or not?

This material has an average weight, so if you build a similar canopy for the machine with your own hands, you need to think about the construction of a reliable base and frame. Most often, customers prefer to build a house and attach a canopy to it - such a constructive solution will correspond to the design and outline of the structure. In addition, this method is more convenient, since the construction will be erected simultaneously with the construction of the house. Due to the metal or forged frame, as well as metal, which will cover the canopy, you will get a kind of platform for the car, protected from all sides. And if you equip this area with a quality foundation and build a path to it, the overall design will be very stylish and interesting.

When deciding how to make a canopy for a car, you prefer to use an awning. The peculiarity of this design is its ease and mobility, since it can be put on any place of the site. In addition, if you need a canopy in the suburban area, then this solution is the most profitable and expedient.

Wood and metal as options

The peculiarity of such construction is the operative erection. At the same time, the canopy for a car made of wood will be practical and durable, and in case of proper operation and processing it will last for several decades. For construction, you can use both a beam and a round log - in any case, the wood will look natural, stylish, close to nature and at the same time meet the requirements of environmental safety. On the other hand, it is important that landscape design is performed in a single style solution. And therefore, next to the brick cottage, the wooden canopy will not look so harmonious and organic.

It is possible to build a canopy for the machine with your own hands and made of metal, and this requires inexpensive and lightweight materials, on which the canopy will fit. The main thing is that the structure is reliable, capital and rigid, especially if the construction is covered with slate and metal.

Paneling canopies: easy to assemble and remove

Demountable and prefabricated structures are the best choice for small areas. First, they have a standard size. Secondly, they are completely ready for installation directly on the site. Thirdly, modern prefabricated systems are developed for different types of coverage, so each customer will be able to choose the best option for himself. Therefore, instead of building a canopy for the car with your own hands, you can fully use the ready-made solutions. The structure of the canopy is simple, the assembly also does not cause difficulties, so you can cope with the installation and with little effort. Will only cover it with suitable or available materials.

Forging: beautiful, but expensive

Owners of country houses and entire residences strive for maximum comfort and brightness of the landscape. For the embodiment of various design ideas, forged canopies perfectly fit. Of course, they are not cheap, and materials for roofing will have to be chosen more carefully. At the same time, the installation process is also not very simple, and therefore it is unlikely to manage without the participation of a professional team. If you decide to install a forged canopy, it is important that it fits well into the surrounding landscape. Suppose, next door to a simple dacha, this construction will look ridiculous. But on a large suburban site with a spacious cottage is quite a decent option.

How to make a canopy?

First, we mark out its location on the site. The second point is the erection of a renovation, which will become an auxiliary construction for future construction. Thanks to it, you can properly locate the support pillars. To install them, dig pits with a depth of up to one meter, pour them on a small level with a concrete mix, lay the supports, fill the rest of the solution. We give time for the concrete to freeze (it takes up to three days). After that, you need to attach the supporting beams to the posts using self-tapping screws. To make the structure more rigid and reliable, spacers can be used, which will also be fastened to posts and support beams. The frame of our canopy is ready. Now it's up to the roofing system (in the simplest version it's a one-run system).