Bird with your own hands made of paper, bottles

Many, especially children, like to make birds and other animals from various materials. In addition, children can use them in the game. People of any age can create crafts based on their skills. In this article, master classes on the production of birds from paper and bottles will be considered. Bird with your own hands? It is not difficult!

Bird of colorful paper

To produce it, you will need the following materials:

• Paper bird pattern;
• Paper and cardboard are multi-colored;
• glue;
• scissors.

This is how a bird is made of paper with his own hands:

1. Applying the bird pattern to the cardboard, you need to cut out two such details. But for the second part, the pattern must be traced vertically downward.
2. The parts obtained are glued together.
3. Now you need to cut out two rectangles of colored paper. Then they are folded out by a fan, and the center is glued together.
4. In the middle of the trunk and near the tail, it is necessary to make incisions into which ready-made "fans" are inserted.

Bird of colored paper is ready!

Paper woven bird

To make a bird with your own hands, you will need the following supplies:

• Multicolored paper;
• Scissors.

Stages of crafting:

1. From the paper you need to cut two pieces. The part is cut into strips at least twenty centimeters long.
2. The upper band is lowered down, while it must alternately be passed through from above, then from the bottom of the remaining strips.
3. The next strip is also just dropped down under the other bands. All the same is done with the other wing.
4. Both wings need to be folded, crossed with each other.
5. Free stripes must be twisted in such a way that a square is formed.
6. To make it easier to work with strips, they can be denoted by letters.
7. The strips A and B fall down parallel to the strips D and C.
8. The band C rises up and is placed over the strip B, and D must be lifted and passed first over C, and then over A.
9. Everything is done with the rest of the strips.
10. All the lower strips will be used for the tail, and the upper ones for the head of the future bird.
11. Through the lower and upper opening in the abdomen are 4 strips. The first are even, and only then odd.
12. All the strips that were pulled up are assembled together, and a knot is made. All excess paper is cut off in the form of a beak.
13. The remaining strips are twisted with scissors in the form of a tail - and the bird is ready.

Paper Bulky Bird

Birds can make their own by any person. Such an article will be a wonderful gift or a decoration of the modern interior. To create it, you will need:

• old newspaper;
• Adhesive tape;
• Paper towel;
• cardboard;
• glue;
• paints;
• scissors;
• wire.

A three-dimensional bird with his own hands is made as follows:

1. The fourth part of the newspaper sheet needs to be crushed in the form of a pear, and the form is corrected with the help of an adhesive tape.
2. From the paper towel you need to cut out strips with a width of not more than 1.5 centimeters. The strips are dipped in a glutinous solution and glued to the workpiece. The workpiece must dry for at least 24 hours.
3. Two pieces need to cut out the details of the wings and tail, which are also pasted with paper strips.
4. The tail and wings are applied to the body and wrapped with strips of glue. Leave the workpiece dry.
5. From the wire the legs are made.
6. The vertical part of the foot wraps around the thread.
7. After complete drying, the workpiece is covered with gray paint, after which you can draw other details.
8. On the tummy, you need to make two holes, into which the legs are inserted.
9. For shine, the bird can be covered with acrylic gel.

The interior paper bird is ready.

Funny Paper Birds

A bird made of paper, made with its own hands, is capable of transforming a schoolchild's work area. They can be placed all over the room, but first you have to cook:

• A small circle pattern;
• Dense paper;
• Sticky stickers of different colors;
• pencils;
• Black felt pen;
• plasticine;
• Toothpicks.

Stages of creating a bird with your own hands:

1. The circle cut from a paper needs to be folded in half and unfolded. To one of the halves you need to glue colored stickers that will act as a tail. On the one hand, only one sticker is glued.
2. The circle is bent again, and from the sticker that was glued on the other side, the piece in the form of a beak is cut off.
3. To create wings you need to stick stickers on both sides in the center.
4. With the help of a black felt-tip pen, eyes are drawn.
5. Scotch tape to the inside of the toothpicks are attached - these are the legs of a bird.
6. Next, you need to roll a ball of plasticine and stick a bird into it.
7. You can not stick a bird in plasticine, and make such birds and put them together in a garland.

Funny birds are ready!

Birds made of plastic bottles for garden

Such birds will look great in the garden, especially if you make a lot of them.

Materials:

• A bottle of plastic;
• The bottom of small bottles of plastic;
• Packages from polyethylene;
• Rods made of metal.

The bird with his hands from a plastic bottle is made easy:

1. From the bottom, you first need to collect the "feathers" of birds. All bottoms must be the same. Sand should be heated in a frying pan and dipped into it for a couple of seconds bottom, which will be leveled. Thus, all the bottoms must be aligned.
2. All ready bottoms are collected on a fishing line. Must be long garlands.
3. A large bottle will act as a torso of a bird. From a metal rod make a bird's neck and insert a bottle into the cork.
4. The neck and body should be wrapped in plastic bags. For a more accurate type of workpiece, the trunk should be wrapped around with a film.
5. Now the garlands are taken and the workpiece is wrapped. Threads must be laid as tightly as possible.
6. The plugs can serve as eyes, and the beak is cut from the plywood.
7. Of the metal rods, legs are made which are stuck into the lower part of the trunk.

Bird from plastic bottles is ready!

Plastic peacock

It should be noted that the work on making such crafts is labor-intensive, but for beginners it will be very difficult. A bird from bottles with their own hands of this level looks like a real work of art.

Materials you need:

• One bottle with a capacity of at least six liters;
• Bottles of 1.5-2 liters - about 50 pieces;
• A grid with small cells;
• A stapler;
• Scotch;
• glue;
• Acrylic colored paints.

We make a peacock:

1. The first thing to do is make feathers for the tail. To do this, each bottle is cut in such a way that the even part remains. The resulting part is cut into three parts. In the resulting details, one end needs to be rounded to make it look like a feather. The resulting blanks must be cut into thin strips. The slots should be as thin as possible. Feathers need to be decorated with so-called eyes.
2. A foam is made of foam or a large plastic bottle. It is necessary to make a trunk and neck.
3. Now all the feathers that have been prepared need to be pasted onto the breadboard model. First, the neck, breast and trunk are glued, and then the back. Use the grid to attach the tail feathers.
4. You can attach a beautiful peacock to the peacock.

Crafts of birds from paper and plastic bottles are very interesting, they can be made by the whole family. A bird with its own hands can be performed not only from these materials at hand. Fine crafts are made from cloth, old disks and even from tree branches.