Best Vibrating Grinder: Overview, Models, Manufacturers and Feedback

Which is better: belt grinding or vibrating machine? It can be unequivocally said that the second option is more preferable. First of all, vibration-type devices are chosen for high productivity. The maximum frequency indicator, as a rule, is 3 thousand revolutions per minute. The soles in the devices are set in different widths.

On the grain, they are quite different. On average, the power of the vibrating machine is 7 kW. The strength of vibration in it reaches 5 microns. The average energy consumption is 300 watts. Mounting is mainly made of plastic. Buy a high-quality model of vibration type can be priced from 13 thousand rubles.

The main producers on the market

Today, the devices of the "Makita" brand are very popular. They are most suitable for professionals. The frequency of the machines of this trademark is not less than 2500 rpm. By the noisiness of the model is quite different. As a rule, stabilizers are installed above the soles. The vibration power index of the models is at least 3 microns.

Also on the market there are devices of firms "Bosch" and "Devolt". For home use, they fit perfectly. On average, the frequency of instruments of the companies represented is 3300 rpm. Models with protective blocks are rare. Still it is possible to mention about trade marks "Ford" and "Zenith". In the range of these companies there are both professional devices and middle class tools.

Overview of the Makita 9558HNG

This is a qualitative and inexpensive vibrating grinding machine "Makita". Feedback, it usually gets positive. However, it is important to note that the noise level is high. The directly abrasive sole is well suited for varnish surfaces. According to buyers, the machine is turned on very simply. The handle at it is made with an overlay and to the case adjoins it is strong. The system of protection against overheating of the reducer is applied in the third class.

The vibration level is only 3 kW. For painted surfaces, the device does not fit well. Its performance is average, and the model is rarely used by professionals. The height of the abrasive pad is exactly 1.3 mm. The system for protecting against overheating of the disk is applied in the second class. The nominal frequency of the device is 2700 revolutions. Buy the specified model of the series can be priced from 12 800 rubles.

Customer's opinion about Makita machine 9565HNG

The specified vibration grinder reviews tend to get positive. First of all, this is due to the compact size. The width of the rack in this case is exactly 14 cm. For the treatment of varnished surfaces, the device fits perfectly. Problems with stabilization are very rare. The gearbox protection system is of the first class.

The height of the abrasive sole is 1.2 mm. The strength of vibration is at the level of 3 microns. The vacuum cleaner in this case is fixed through a plastic branch pipe in the rear part of the structure. It practically does not interfere with work. The maximum angle of the disk is 5 degrees. For the purpose of processing metal blanks, this tool is rarely used. The price of the typewriter of this series fluctuates around 15 600 rubles.

Comments about the model Makita 9574HNG

The Makita 9574HNG vibrating grinder has many advantages. First of all, experts point to a large working disk. The abrasive outsole of the model is fixed quite firmly. According to buyers, you can work even with a large angle of inclination. The gearbox protection system is applied in the third class. With the stabilization of the machine this series is all right. For the treatment of pine surfaces, it fits perfectly.

A standard set includes several abrasive disks. The system of protection against cuts is provided for the RK series. The network cable of the model is used with a casing that is not afraid of high humidity. Dust bag is not included in the standard kit. It is worth in our time this machine grinding type in the area of 12 900 rubles.

Overview of the Bosch PWS 700-125

The Bosch PWS 700-125 vibration grinder is manufactured with a single stabilizer. The abrasive disc in the device is of small diameter. With a view to cleaning the doors the device fits perfectly. The gearbox protection system is used in the third class. Handle in the model is made with two overlays and high humidity is not afraid. The motor protection system is used by the DSC series. In this case, the bag in the standard kit is small in size. Therefore, it often has to be torn out. Buy the model of the series can be for 18 thousand rubles.

Customer Reviews of the Bosch PWS 700-130

This vibrating grinding machine reviews are different. Some scold her for low power. In this case, the rated frequency is approximately 4300 rpm. At the same time, the vibration level is not very high. However, there are a lot of advantages in the device. First of all it is necessary to mention a qualitative reducer. The overload protection system at the machine of the specified series is available.

Abrasive disc is used quite wide. At the same time, the sole practically never overheats. Its height is exactly 1.4 mm. The instrument weighs very little and is excellent in the hand. The clamping mechanism of the model is capable of withstanding heavy loads. If necessary, the tool can be used at an angle. The rated power of this vibration type machine is 5.6 kV. It is worth a model in our time about 17 thousand rubles.

Comments about the model Bosch PWS 700-133

This vibrating grinder is in high demand among professionals. The nominal power of the tool is 7.5 kW. It operates from 220 V. The frequency of this machine is at around 2100 rpm. The abrasive outsole in this case is not set to a large width. For the purpose of processing the pine surface, the model fits perfectly. The disc in the device is used with the stabilizer.

The gearbox protection system is applied in the third class. The height of the abrasive sole is 1.2 mm. The overvoltage protection system of this vibration-type machine is not available. In total, the device uses two casings. The power cord is short. For the purpose of processing the oak surface, the tool is suitable. Stand in our time these vibrating polishing machines (market price) about 15 400 rubles.

Opinion of customers about the machine DeWalt DWE4051

This vibrating grinder is most suitable for a concrete surface. The nominal power of the tool in this series is not more than 6.7 kW. If you believe the feedback of buyers, the stabilizer in the device is of high quality. In this case, the abrasive disc is used with an overlay. The width of the sole is 11 cm. For finishing works, the tool fits perfectly. The gearbox protection system is applied in the second class.

For pine surfaces, the machine does not fit well. The noise level of the instrument in this series is about 33 dB. The protective gasket at the machine is not provided by the manufacturer. The tool holder is completely made of plastic. The index of the vibration force is at most 3 microns. With the performance of the tool of the specified series, everything is fine. However, it is important to note that the disc is erased quite often. The vacuum cleaner to the model is fixed through a plastic branch pipe. Buy the specified electric type instrument can be priced from 18 thousand rubles.

Model Reviews DeWalt DWE4060

DWE4060 are DeWalt's best vibrating grinders among compact models. This device has a lot of advantages. Among the advantages in the first place, it is important to note the low noise parameter. The motor of the model is set at 6.6 kW. The gearbox protection system is applied in the third class. If you believe the reviews of buyers, then failures in the stabilizer are observed infrequently.

The abrasive outsole of the tool is used with two overlays. Using a large angle the machine is prohibited. The maximum tool frequency is 3300 rpm. If necessary, the protective gasket can be changed by yourself. To connect to the network, use a cable with a dense casing.

He is not afraid of high humidity. The height of the abrasive sole is exactly 1.3 mm. The vacuum cleaner to the tool of the specified series is connected through the rear branch pipe. The handle in the device is applied with two overlays. It is worth in the stores this vibrating grinder about 14,800 rubles.

Overview of the DeWalt DWE4070

This is a professional and high-quality tool. Feedback This model, as a rule, receives a positive nature. However, it is important to note that the tool's sole is used rather large. For the purpose of processing concrete surfaces, the tool fits perfectly. If you believe the reviews of buyers, then the starter at the machine starts without any problems. At the same time, the energy consumption indicator is at the level of 250 W.

The gearbox protection system is used in a wired class. Faults in the motor are rare. The vibration level of the instrument is only 2.2 microns. The width of the abrasive sole is only 13 cm. In shops, the specified grinding machine is sold at a price of 22 thousand rubles.