Polypropylene pools: customer reviews. Pool for a summer residence polypropylene

Polypropylene pools are becoming more common today. This is due to their excellent quality characteristics. Verify this will help you with feedback from consumers who have already used such products for a long time.

Testimonials about durability and the need for finishing

Polypropylene products are now used as swimming pools for a variety of reasons, among them there can be an insignificant steam, heat and gas permeability. At the stage of arrangement, thermal insulation materials will not be required, since polypropylene has a low thermal conductivity, which helps maintain a constant water temperature. This allows for a long time to keep the water inside the pool warm. This quality is reflected in the flow of coolant and electricity. Thus, the owners note that they do not have to heat the concrete, land and air, but only the water itself. Polypropylene pools are characterized by excellent impact and mechanical resistance to bending. Seasonal temperature changes are also not terrible for this material. That's why the pools are installed in the open air. In the process of arrangement, you can also save, because the bowl does not require the need for cladding or finishing. You do not have to buy a tile or a film, as the internal base of the pools has a finished look.

Easy care

The surface is easy to clean, has a pleasant shade, and is also resistant to the effects of colorants and chemicals. When wet, the base does not become slippery, which indicates trauma safety.

Feedback on resistance to temperature and leakage

Polypropylene pools today are becoming more common in everyday life because they perfectly tolerate the effects of alkalis and acids. Among other things, ultraviolet can affect the surface, which does not damage the material. Polypropylene is not capable of entering into chemical reactions. It does not fade, nor does it abrade, which allows using the products for 20 years. During this period, it will not be necessary to carry out repairs, only disinfection and purification will be necessary. Consumers emphasize that polypropylene is incredibly resistant to record high and low temperatures. This allows owners of outdoor and indoor swimming pools not to drain water for the winter period. Thus, you can use the outdoor pool as a winter rink. Specialists note that these products are incredibly tight. Due to the manufacturing technology, the tank has an ideal waterproofing. The surface prevents the appearance and development of algae and fungus on the surface. Professionals of their business point out that such swimming pools are ideal from the point of view of disinfection. Polypropylene pools are presented in a wide range of shades.

Reviews about the cost and diversity of forms

The pool for a polypropylene dacha can have all kinds of forms. This was made possible through special welding. Polypropylene of this kind allows to realize even the most unusual fantasy of a designer and an architect. In addition, you can purchase the entire set of equipment, which can be the same as that provided for reinforced concrete products. Among them, we can mention hydromassage jets, skimmers, countercurrents, air massage nozzles and more. If you compare polypropylene pools, which you can read about in the article with traditional ones, their cost and production time will be much more attractive. Thus, these products cost 2.5 times lower compared to concrete analogues.

If you want to purchase a swimming pool, then, according to the buyers, everything will depend on the size and depth. Owners of private houses that have already installed such structures on their territory indicate that the bowl, whose size is 4 x 8 meters at a depth of 1.5 meters, will cost about 100,000 rubles.

Feedback on the timing of manufacturing

Polypropylene pools, the price of which was listed above, are turnkey for a period that varies from a week to two. After, according to consumers, an ecologically clean, solid and solid pool appears on the territory, which could initially be realized in the form of rolls or individual sheets.

Negative feedback

Polypropylene bowls for the pool have their own disadvantages, considering which, you may be refusing to purchase such a product. Among the cons, buyers often distinguish that the bowls have very visible seams of the soldering of sheets of material. This clearly indicates that in the process of equipping the pool, budget plastic was used. Some owners of private houses refuse to buy a polypropylene pool in favor of one that was made of natural materials and concrete, because of the more aesthetic appearance of the latter option. Another disadvantage is that polypropylene is not vandal-resistant. This is reflected in the construction of the pool. If the length exceeds 8 meters, then you will have to additionally pour the bowl. This can lead to additional material costs. Despite the fact that the life span of such structures is considered impressive for polypropylene, a number of consumers refuse from plastic designs in favor of other solutions. The reason is that concrete structures can last a much longer time.

The need for a professional installation

Polypropylene sheets for swimming pools can be purchased by you. However, experts recommend that the installation be entrusted to a team of professionals. Only in so many cases it is possible to achieve a positive result, which pleases its owners for a long time. Moreover, these works are recommended for entrusting to the companies whose workers have many years of experience in the installation of polypropylene bowls. As practice shows, if the installation of the polypropylene pool was not performed correctly, this could cause deformation or even a rupture of the material during operation. Therefore, before ordering the installation of a particular firm, it is advisable to ask what experience it has and what place it occupies in the market for the provision of related services.

The variant of manufacturing a stationary polypropylene basin

Polypropylene pools, the price of which you may seem impressive, can be manufactured independently. This will have to be guided by a certain technology. At the first stage, it involves the preparation of a pit, which will determine the size of the future design. Further, the bottom and walls should be leveled, and the surface should be filled with a screed. In the manufacturing process, polypropylene sheets should be used. On the reinforced concrete slab the next step is to make a basin bowl that will have stiffeners. In this case, it is necessary to use hand-held hair dryers and a welding extruder. That is why there is no way to do without special equipment. In the received bath it is necessary to cut in mortgage elements and to deduce pipes in the direction of a technical premise. At the next stage the bowl is tied with reinforcement, it is insulated and broken. Now you can start making external formwork. Internal formwork will be a polypropylene bath. Then it is possible to carry out layer-by-layer concreting of walls with the addition of water to the pool.