"Aquastop" - protection against water leaks: protection technology, installation and feedback

Today, there are many technologies that can protect the home from all sorts of troubles. One of them is the "Aquastop" system. Protection against water leaks is achieved through automation. Such a device is capable of preserving the repair of both the apartment owners and their neighbors who live from the bottom. The device includes several elements, the installation of which can be done independently. Today, the consumer is presented with several systems of this type. Feedback from users will help you choose the best one. Protecting your home from the flood is easy enough. The application of "Aquastop" can save considerable funds of the family budget.

general characteristics

Many manufacturers of household appliances associated with the water supply equip their products with built-in protection against leaks. However, this applies only to the top models, and from the flood due to a breakdown, for example, a mixer, can not help anything.

To protect yourself from troubles, it is necessary to provide protection globally, and not only from the possible breakdown of the washing machine. It is more correct to block the riser of the water supply to the apartment. This is the meaning of the smart system "Aquastop". Protection from water leaks is produced by it on the scale of the whole apartment. The elements included in its composition, due to their well-coordinated work, block the flow on the common main of its supply to the apartment. This guarantees 100% prevention of property damage from the water supply.

Equipment

There are 3 main elements that are included in the system "Aquastop". The protection against water leaks (the photo is shown below) is carried out by ball electric cranes, controller and humidity sensors. If water gets to the floor, it is picked up by the sensor.

Sensors can be located in the kitchen, in the bathroom. They can be tied to one controller. This is the "brain" of the whole system. It processes the signal received from the sensors and overlaps the electric ball valves if necessary. The latter are installed in pipes of cold and hot water supply. Sensors can be wired or wireless. Their number varies depending on the type of system. Whatever package is in this device, you can mount it yourself.

Installation of ball valves

There is a certain technology that allows you to install the system "Aquastop". Protection against water leakage, which is installed in-house, will require a study of the sequence of actions. Ball electric cranes must be embedded in the pipes behind the manual input valves. In no case they can not be mounted before or instead of the stop valves.

Before installation, the water supply is blocked. Further, the wiring is disconnected from the input valve. Then the cranes of the system are installed. If the thread of the ball valve is external, it is simply wound onto the communication. When it is internal, it is necessary to use the "American". The thread is wrapped with a sealant (fum-tape, tow). The system crane is screwed to the valve in a certain direction. It is indicated by an arrow. The pipes are connected.

Controller

The control device has a basic requirement in the process of installing the system "Aquastop" - protection from water leaks. What kind of device is it, easy to understand by its appearance. Photo is provided below.

This is digital equipment. Therefore, it does not like high humidity. Durability of the installation will ensure its installation in a dry, splash-proof place. Humidity should not exceed 70%. Having chosen a suitable place, it is necessary to screw the plate to the wall with screws. It is included. When this work is completed, you must install the controller. It is mounted on a dedicated plate.

Sensors

After carrying out the above manipulations, the next stage of installation of the device "Aquastop" comes. The installation of a water leakage protection system now involves the installation of sensors.

With wireless versions of them, everything is simple. Such sensors are installed in places of possible leakage. But here wired varieties have to tinker. Wires can be left open or hidden behind the plinth, between the seams of ceramic tiles. The sensor is usually fixed with adhesive tape or screw to the floor. It is closed with a decorative cap.

Connectivity

When all the elements of the system are located in their places, they must be connected to each other. The corresponding connectors of the controller (labeled with the inscriptions) are connected to the control device in the necessary terminals. Wireless devices are already registered in the controller's memory. They do not have to be connected.

The battery pack must be connected to the card. To do this, it has a special connector. The unit is connected to the main part of the controller. For this, the wires are pulled through a special hole. If the system is wireless, it is necessary to connect the battery pack to the radio base. Then they are attached to the controller. All work takes from 1 to 4 hours. Adhering to the instructions, it will be quite simple.

Expert Reviews

Professional plumbers for a long time are familiar with system "Аквастоп". Protection from water leaks "Neptune", "Aquastorozh", "Hydrolyk" in this matter are, in their opinion, the most popular. Each of them has its own characteristics.

The "Neptune" system, for example, has a response rate of 5-7 seconds. To resume operation, press the button on the controller. "Hydrolux" has the function of self-cleaning of cranes. This greatly increases the life of the system. The materials from which it is made are of very high quality.

A special feature of the protection of "Aquastoria" is a special device for accumulating energy. Therefore, it can work without connecting to the network. Each of the presented devices has its own versions of equipment. Therefore, experts are recommended to select them in accordance with the conditions of the premises.

User Reviews

Among users of the system there are many opinions about the operation of the device "Aquastop". Protection against water leakage, the reviews of which are presented in various sources, indicate the effectiveness of the system. Some consumers argue that the use of such an approach in everyday life is not very convenient. During bathing with accidental water ingress to the sensor, its supply can stop abruptly. But this does not happen if you close the curtain. From small droplets the sensor is protected by a decorative cap. More durable, according to user feedback, is the "Hydrolock" protection system. It is also noted that wireless sensors in everyday life are much more convenient. The ability to work without a stationary power source is popular with many users of the Aquapostra system.

Having become acquainted with the flood prevention system, it can be concluded that it is quite durable and effective. You can mount "Aquastop" yourself. Protection from water leaks protects the dwelling from unpleasant situations, preserves the repair of the apartment owners and their neighbors. Various variants of a complete set and principles of work of system will allow to pick up an optimum variant. This is one of the most reliable types of installations preventing the flow of water in the dwelling.