Nozzles for chainsaws (attachments): motobur, compressor, broom

Modern chainsaws are able not only to saw wood. This is a universal device that can be adapted to the most wide-ranging tasks. If desired, an ordinary chainsaw can be used as a pump, a motor, a boat or a bicycle.

In the breadth of the possibilities, no tool can compete with them today. With additional equipment, the saw can pump water from wells or wells, cut stone, metal, pull cars stuck in snow or mud.
All this becomes possible thanks to the attached implements. The tools for chainsaws can significantly expand the functionality of this tool.

A few words about the capabilities of modern devices

These tools use a fairly powerful, but small-sized gasoline engine.

Together with the power unit, the maximum hermetic fuel system and membrane carburettor operate. All this allows the device to perform the widest range of tasks.

On the output shaft of the engine, you can attach various nozzles for chainsaws, allowing you to do anything you like. Another plus of such gasoline tools is increased mobility. Works can be performed anywhere.

Chainsaw has a very good design. And the breakdown of this system is a very rare case.

Types of nozzles

If you have a chainsaw, but you do not know how to use it, and all the wood is already cut, then this information will help you to use the gasoline tool in its entirety.

Nozzles for chainsaws can solve almost any task. There are a lot of species.

So, there is a device that allows you to cut wood in a horizontal plane. With its help, you can cut the log into equal parts. At the same time, the frame structure of this device can provide the necessary rigidity.

Another nozzle allows you to saw logs in a vertical plane.

Despite the simplicity, the accuracy of cutting with this accessory is very high.

With the help of a gasoline cutter it is very convenient to cut and saw the most diverse metals and stone - this is the same Bulgarian, but mobile.

Decarchers for chainsaws make it possible to clean logs from the bark or various outgrowths. Also the device is used for cutting out cups, various grooves and grooves. There are two types of this nozzle. So, there are drum-type debarkers and discs.

The winch can help pull the boat out of the water, stalled in the dirt car, move various heavy objects or building materials. The winch with the help of additional equipment has a high draft power and can change the trajectory of motion.

The water pump is a real gasoline centrifugal pump. Its power is 5 liters per hour. This is enough to pump the water out of the cellar or water the country plot. The advantage of this nozzle for chainsaws is mobility - it is possible to use such a pump anywhere and under any conditions.

Motobur can drill an ice hole for winter fishing, and can also create pits with a depth of up to 35 cm.

Also, a special device helps to convert a chainsaw into a motor for a boat.

The cutter easily turns the saw into a gasoline cutter, and a mini sawmill will help saw the wood in many different ways.

"Koroder"

If it is necessary to remove the bark and build-up from the wood, a corder is used. The nozzle, chainsaw and this device will also help in cutting out cups, various grooves of any configuration. Also with the corder you can plan logs.

This nozzle is very simple and yet extremely reliable. Installation of it on the chainsaw will take no more than five minutes. Logs after processing are of high quality. The speed of the nozzle is very high, and the same treatment of logs by hand is a rather long process.

"Bark beetle"

It is nothing like a milling head, but not a simple one, but a special one.

It is used when you need to process logs, boards or bars. This nozzle, as well as the previous one, helps to cut out grooves or cups in a log.

This attachments are manufactured and sold together with a special belt. The nozzle can not work with all models, but only with those where the asterisk has 6 beams. When the task of roughing the wood is, this is what will help to make it as quickly and conveniently as possible.

"Mower"

With this device you can easily cut out the grass on the site. Moreover, in a private house the chainsaw must be found in the garage or utility room.

This is the nozzle for the chain saw Stihl. And for saws of other manufacturers there is a variant of manufacturing such system under the individual order. At a cost of up to 2500 r. - this is a great thing for a private house.

Nozzle for bark removal

This accessory will help to clean just felled or sawn log from bark and knots. Debacers, as they also call these attachments, will help sharpen any stakes, and also greatly facilitate all kinds of work where an ax is needed.

The product is important for the construction of log houses. The system is installed in the standard place of the chainsaw. The case of this accessory is equipped with additional protection. The only thing you can use is not with any saw.

Motor for boat from chainsaw

Glanding and displacement boats with a transom height of less than 38 cm can be equipped with a real gasoline engine. Easy installation, ease of use, affordable price - all this makes this lap an excellent purchase.

A nozzle «бензорез» for a chainsaw

This device is used for cutting metal. Also, this system is used for abrasive processing of metal or stone products, as well as for cleaning the welding seams.

These accessories work thanks to cutting wheels, whose diameter is less than 20 cm.

Also for the cutting of metal it is possible to apply a nozzle "Bulgarian". From the title it is clear why this device can be used. The system is operated by a belt drive.

Winch

This is a real winch that can help when lifting various loads to a height.

These loads can be quite heavy. It is also a necessary thing for motorists who like extreme driving in extreme conditions. The nozzle is easy to install, as well as compact in size.

When the winch and the plow are combined, the processing of the land in the suburban area is greatly accelerated.

Motobur

With the help of this device, pits are drilled in the ground or in the ice layer. The diameter of the hole is up to 40 cm. Motobur is an indispensable acquisition for those who seriously enjoy winter fishing.

Brushcutter

This piece is used to remove bushes and twigs. This is the ideal solution for those who care a lot for plants. There are electrical devices that provide the same options, but these nozzles for chainsaws have mobility, which is a significant advantage. High power speeds up work.

Longitudinal sawing of logs

This accessory is a small, compact sawmill. It is very convenient in field conditions.

The sawmill is autonomous, which means it will help in work where there is no electricity.

Alternative ways to use the device

Owners of modern chainsaws just saw the wood with this tool.

And with this simple tool you can make a real motorized bicycle - and it will not be Chinese motor wheels. Attachments make it possible to make a powerful vehicle out of a conventional bicycle.

There is also a nozzle for building a light helicopter or a paraglider. In the household, this does not help, but this once again proves that this gasoline tool has a huge potential.

With the help of these attachments and attachments, many types of work can be greatly alleviated.

Many tasks are very simplified. Chainsaw is a highly mobile tool, and with adaptations it turns into a multifunctional system that easily replaces much, if not everything you need in a private country house and a household.

Today, with the help of special accessories, you can easily create a motoblock from this cutting tool and work it on the ground. The price of most of these attachments is more than affordable (an average of 2500 rubles). At the same time, the cost of the same devices, but stationary - high.

So, we found out what are the nozzles for gasoline saws and what they serve.