Aquario - a pump for stable operation. Review and Feedback

In order to raise water from an impressive depth and bring it into the system under pressure, it is necessary to use special equipment that can function in difficult conditions. These devices include downhole pumps, which must have the strength and ability to undergo fluid pressure.

But these conditions are not the only ones that should be observed to achieve a positive result for a long time. It is important, for example, to ensure that the sand content in the pumped liquid is not too high. However, on the market you can find models that are not as sensitive to the quality of the environment.

Pump selection features

Among the basic characteristics of pumping equipment, it is necessary to isolate the tightness, since the pumped medium should not be in contact with electronics. As one of the main features of such units it is necessary to allocate also reliability, after all their operation should not be accompanied by necessity of too frequent repair. Such qualities are the equipment Aquario. The well pump is an excellent example.

Manufacturer Information

Aquario pumps, the manufacturer of which is in Italy, appeared on the Russian market almost 8 years ago. This period was enough to ensure that the product has established itself among consumers. In general, the company Aquario is an international manufacturer whose factories are located in:

• Italy.
• Japan.
• China.
• Taiwan.

As a result, the company manages to create products that are distinguished by outstanding technical characteristics, affordable cost and reliability. Aquario - pumps, which you can read about in the article, are high quality equipment. However, to extend the life of the device, care should be taken to ensure that the pumped medium does not contain excessive amounts of sand. For normal operation, its content should not exceed 120 grams per cubic meter.

Models overview

If you are the owner of the well, you can choose to pump water from it pumping equipment under the brand Aquario. However, it is first necessary to pay attention to the depth and diameter of the well in order to select the parameters correctly. The manufacturer proposes several variants of pumping equipment for sale, each of which is intended for wells of a certain diameter.

Models are characterized by a certain set and performance. For example, the ASP 1,5C equipment, whose diameter is 3 inches, is designed for narrow wells with parameters from 80 mm. The performance of this device is 50 l / min. The unit can be installed with a certain engine power, which provides a head from 50 to 100 m. From the water mirror, the device can be loaded to a depth of 20 to 30 m.

If you are interested in equipment under the Aquario brand, the ASP 1C pump can be considered. It has a diameter that is 3.5 inches. The characteristics of this device are similar to those of the device described above. However, this unit is not so sensitive to the quality of the pumped medium. The diameter increases to 4 inches if you have an ASP 3B pump. It is the equipment that is most in demand among the others, as household wells usually have a diameter of 100 mm. Performance remains the same, but the equipment itself is more powerful, so it is able to supply liquid to a height of 130 m or more.

By purchasing these settings, you will be able to take advantage of the opportunity to familiarize yourself with the instruction in which technical parameters are presented. They indicate the conformity of the equipment to the needs and parameters of the source. Thanks to this knowledge, you can install the pump yourself, and then make it connect.

Reviews on the design features of pumps Aquario

Aquario is a pump that, in the opinion of customers, has outstanding design features. For example, its shaft is made of stainless steel, but brass serves as the basis of the inlet branch pipe and engine cover. In the engine at the production stage, an elastic membrane is installed, which is capable of leveling the external and internal pressure. Such a motor has a wet rotor.

If you want to save, then consumers are advised to pay attention to the equipment, in the marking of which there is a letter E. This indicates that in front of you a device in which the inlet pipe is made of nickel-plated cast iron. Important nodes that are in contact with water during use, as the buyers emphasize, are made of strong polymeric materials. They are additionally reinforced with steel inserts. To protect the engine, high-quality insulation materials are used that correspond to the high class F.

Aquario is a pump, which is usually a multistage centrifugal device. According to consumers, the more stages, the greater the pressure will be provided by the unit. However on sale it is possible to meet and screw variants. This should include the model ASP (ST) 1/40 - 250.

Overview of the AMH-60-4P Pump Model

The Aquario pump AMH 60 4P refers to surface multi-stage pumps, which are located horizontally during operation. Used equipment for pumping clean liquid from:

• Wells;
• Open reservoirs;
• Wells.

The depth of the water should not be more than 7.5 m. This device operates at a low noise level, so you can install it even in a residential area. The average range for productivity varies from 10 to 50 liters per minute. The maximum suction height reaches 8 m. In the case the maximum pressure should not be more than 6 bar. These Aquario AMH pumps operate at a temperature of pumped medium ranging from +1 to +40 ° C. In this case, the temperature of the environment varies within the same limits.

Overview of the pump brand AMH-125-6S

The Aquario pump AMH 125 6S has an engine that is cooled by the air system. Injector and diffuser are made of technopolymer. A hundred percent copper is used as the stator winding. The rotor and the stator core are made of electrical cold-rolled steel. Stainless steel serves as the basis of the pump shaft.

Conclusion

If you decide to purchase a pump brand Aquario, then you need to become more familiar with the features of its installation. It is important to consider that the diameter of the well should be greater than the diameter of the pump along with the cable. The connection to the mains must be reliable and hermetic. The equipment is dropped by means of a chain or cable, which are fastened behind the eyes in the device. It is important to eliminate the possibility of damage to the electrical cable when installing the unit.