After reinstalling Windows 7, the computer slows down: what should I do?

Very often, many users who for some reason had to reinstall the "seven" complain that after reinstalling Windows 7, the computer brakes with such force that it is simply impossible to work. Let's see what this can be connected with, and discuss how to get out of this situation.

Why does the computer slow down after reinstalling Windows 7?

On the reasons that prompted the user to install the "Seven" again, now we will not dwell. Consider the problems that arise after this. Sometimes there is very strong braking, the Internet does not work after reinstalling Windows 7, there is an increased load on system resources or too frequent access to the hard disk, etc. What could it be caused by?

The very first thing that users of stationary computer terminals need to do is to check the memory slots and the density of plugging cables on the motherboard. Little it may be, a lot of dust has gathered in the system unit, which leads to braking and hanging the system.

On the other hand, it may very well be that the user mistakenly installed a 64-bit version of the "seven" instead of the 32-bit version (alas, it happens), and the computer or laptop itself uses the outdated "hardware", which with great stretch corresponds to the minimum System requirements. So it turns out that after the reinstallation of Windows 7, the computer brakes only for the reason that 64-bit "Windows" is much "more gluttonous" version in 32 bits. But this is, so to speak, a general case. Now let's go on to find out the specific reasons.

What drivers are needed after reinstalling Windows 7?

A fairly common phenomenon can be called the presence of obsolete drivers in the system, because a clean "seven" is also not the most recent product. In addition, if a user does not have an original driver disk that must necessarily be supplied when purchasing a computer or laptop, the system installs the most suitable ones from its own database, which, to put it mildly, is completely irrelevant.

In this case, after the installation process is completed, the OS does not need to rush (sometimes some drivers may not work). It's better to use special releases or update programs. For example, a very good option may be the driver base Driver Pack Solution, which is always desirable to have at hand.

On the other hand, it "weighs" a lot. In this situation, a free utility for searching and updating drivers called Driver Booster is perfect. It works just fine, and the drivers of all devices are updated exclusively when referring to the official resources of the manufacturers, where, as a rule, the most current versions of such software are constantly laid out.

But there is one snag: if the Internet does not work after reinstalling Windows 7, installing this utility is simply meaningless, since there will be no update if there is no connection (more on this later).

Too much workload on system resources

Now we need to pay attention to one more thing. Quite often there is an increased load on the processor and RAM, which is the cause of braking or hanging. What to do? See what process causes maximum consumption of resources (as is known, in any version of Windows, a lot of unnecessary services are started by default, which can and should be stopped).

First we call the standard "Task Manager". This is done with the help of all the familiar combination Ctrl + Alt + Del or by entering the taskmgr command in the special "Run" menu bar (Win + R). Here you need to sort the contents of the maximum load in the sections of processes and services, and then see which component the system loads.

Next, you need to configure startup. To do this, use the msconfig command all in the same "Run" menu and turn off all unnecessary on the corresponding tab. You can leave only the antivirus, if one is already installed, and the keyboard indicator (the ctfmon process). From all other services, we remove ticks without a twinge of conscience (they are still absolutely unnecessary for most users).

Problems with the Internet

Now let's see why there are sometimes problems with access to the Network. First of all, if you are using, say, Wi-Fi, you should make sure that the appropriate module is enabled on your computer or laptop (there are a special combination of keys on the latter (most often it's Fn + some kind of function button, say F5 - it all depends on the model ).

If everything is fine, you need to look into the TCP / IP protocol settings, which you can access through the Internet properties menu. In most cases, it helps to set the receipt of an IP address in automatic mode and disable the use of a proxy for local addresses, unless the provider provides otherwise. If all the parameters are entered manually, you just need to check that they are correct.

Finally, it may very well be that the network card has an outdated driver. Therefore, it needs to be updated. To begin with, you can use the system's own tools in the Device Manager, or, much better, install the driver from the above pack. In extreme cases, you can copy the values of DEV and VEN in the list of equipment IDs on the description tab, and then refer to special sites to find the driver for these values, then download it from another terminal that has access to the Internet.

What in the end?

Here, in fact, we dismantled the main reasons why after the reinstallation of Windows 7, the computer slows down. Of course, here are not all the situations that can arise. However, these are the most common. As for what programs are needed after reinstalling Windows 7, this issue has already been partially considered. However, here you can add more antivirus, archiver, office suite, video and audio codecs and decoders, etc. But there is already the right choice for the user. By the way, as an option, you can put some automatic optimizer, which in real time will monitor the state of the system and timely unload from the memory of unused or unnecessary processes.