TechnologiesCable and satellite TV

Adjustment of satellite dishes without assistance

In our country, it is very often required to install and configure a satellite dish, since this type of television is gaining momentum every year and is becoming more popular. Usually this business is handled by specialized companies, but installation can be carried out with their own hands. The equipment is assembled according to the instructions, without causing any special difficulties. Careful attitude requires an antenna mirror, made of aluminum. After assembly work, make sure all the fasteners are secure. Especially if you configure the satellite dish yourself. In no case can not neglect the installation of a satellite convector, because it will depend on it the quality of reception.

To configure the satellite antennas did not grow into a real torture, installation is recommended in easily accessible places. If you plan to place outside the window, then for the cable you can drill a hole in the corner of the window frame. When located on the roof, low-current risers are often used. You can also pass the cable along the building's facade. The diameter of the holes should be slightly larger than the thickness of the wire, otherwise the outer shell can be damaged. At the last stage, work is being done to seal the holes.

It is interesting to set up satellite antennas with a shifted focus, which have an oval shape. Such devices allow several transducers to be installed to receive a television signal and receive several satellites at once. Fasten the nuts to the end does not follow, because the antenna will have to be sent in different directions. First, a central satellite is sought and connected to the first input. Then, in the same way, are the rest. In fact, the order of connecting the converters is not particularly important. It is only necessary that the actual connection be matched to the displayed satellites in the menu.

The classical setting of satellite dishes is carried out taking into account the position of the sun. Usually at one o'clock in the afternoon a "plate" is sent to him, while the time zone and the time of the year must be taken into account. Further, it turns very smoothly until there is a confident signal reception. If there is no signal, it is recommended to lower or increase the antenna. And in the same way, continue to look for a steady impulse. After a successful search, all fasteners are fully tightened. After a while, the receiver will automatically find all the TV channels.

Thus, we can say with confidence that the adjustment of satellite antennas is nothing supernatural. With the right approach it will be possible to save a considerable amount by adjusting the equipment yourself. However, without a thorough study instructions can not do. Using the recommendations of specialists, you can watch your favorite TV shows and movies in an hour. The installation work can be considered complete when all channels calculated for this antenna diameter appear in the satellite tuner.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.