Winter tent for fishing with their own hands. How to make a tent with your own hands

A convenient and spacious tent is one of the most important attributes for winter fishing. Without it, simply can not do. Often in anticipation of biting fishermen have to spend hours on the strong frost and wind. Well, if there is a tent nearby, in which you can periodically warm yourself. But what about those who can not buy it? After all, this pleasure is not cheap. Today we will tell you how to make a tent with your own hands. This process does not require special skills and knowledge.

Types of winter fishing tents

First, you need to decide on a suitable design. We list the main types of tents:

• Umbrella. Duralumin rods or tubes are used to make the frame. The finished structure has rigidity and increased strength. As a tent suitable for any synthetic fabric. Often they are used in combination with tarps.
• Tent-machine. This option is not as common as the previous one. A distinctive feature of the design is that the tent is sewn to the elastic frame, and then folds into a circle.
• Frame on the arcs. This model consists of 2-3 arcs, made of fiberglass or duralite. The design quickly unfolds in place. A tent is pulled over it.

What form can a tent for winter fishing have? Cube, triangle, trapezoid and so on. The choice is yours.

What are the requirements for a self-made tent for winter fishing

About everything in order. The main function of the tent is to protect the person from unfavorable weather conditions (wet snow, strong wind). And it increases the comfort of fishing. Being under the awning, you can prepare food and tea, as well as to bask, using special heaters. Of course, on sale there are a variety of tents for winter fishing. The photos attached to this article prove to us that self-made designs are obtained no worse than store designs.

So, to the point. What should you pay special attention to when making such an important attribute? A winter tent for fishing, made by hand, must meet the following requirements:

1. Have an easy, compact and mobile design. This is understandable. Some fishermen will prefer to freeze for several hours, than to drag on themselves an extra load.

2. Quickly decompose and easy to install.

3. It is desirable that a winter tent for fishing with their own hands Was made of a dense canvas or waterproof cloth.

4. A really strong frame is made of aluminum and composite materials. But plastic is not recommended.

5. Keep warm inside the tent. It would be good to achieve this without heating devices (portable, gas and others). But this is utopia ...

What materials and tools do you need?

Winter tent for fishing with your own hands is an excellent solution that will allow you to save a lot of money. We propose to collect a fairly simple design. This is a tent based on a standard box, which can be purchased in a store for anglers. We also need:

• One pair of children's (very small) and school skis (length up to 160 cm);
• Several duralumin pipes (you can remove them from ski poles);
• Old clamshell;
• Waterproof fabric (to be used as a tent).

Winter tent for fishing with your own hands: instruction

All the necessary materials and tools have been prepared. Now we can proceed to the practical part:

1. Take dural ski poles. Of these, we carry out the vertical tubes of the framework. As for the horizontal tubes, they should be a little thinner. The upper joints of the ribs of the future tent are made in the form of tees, which terminate in cylinders (length 5 cm). It is very important that the diameter of the cylinders is the same as that of the tubes to be connected.

2. We proceed to fix the lower ends of the vertical tubes to the skis. The key role here is played by a shaped lock. At the lower end of the tube we find the T-shaped tongue, and then gently insert it into the metal plate fixed to the ski. It remains to rotate the tube by 90 degrees.

3. To connect the frame of the tent to the box, use 2 bent at the ends of the duralumin pipes from the old clamshell. The end of the docking product must be fixed to the end of the bent tube. At the other end, we set the latch, which during docking with its tongue will fall exactly into the hole on the second bent tube.

4. The box will be connected to the above-mentioned tubes with the help of round eyelets arranged on the ski racks. They can be made from a copper or steel strip, and then attached to the racks.

5. Now you need to pull the tent. On the lower edge of the material, we set metal plates with slits. It is in these slots will be held U-shaped staples, driven into the side ends of skis. We fix the joints with the help of shoe laces. To keep the tent firmly on the ice, it is necessary to equip it with anchors (2 pieces). Each such anchor is a penknife with two blades at the ends.

Build a tent on the spot

Making a winter tent is only half the job. It is necessary to collect and install it correctly. The algorithm of actions is as follows:

1. We connect the halves of the bent tubes to the skis. The tongues should fall into the slots of the plates. Pipes are located along the axis of the skis, and then rotate by 90 degrees.

2. We pass the ends of each pair of tubes through the lugs, which are available on the ski racks.

3. Connect all 4 skis. The tongue of the lock of the folded tubes should snap into place.

4. We proceed to install the box.

5. We carry out installation of 4 vertical racks on the ends of skis.

6. Now you need to install the tees on the ends of the tubes, and then connect them to the roof tubes.

7. We combine the holes of the tubes and tees. Through them will pass the mounting wires.

8. We pull the awning on the frame. Through the braces and tongues, available on skis, we carry carbines and plates. We fix the connections with laces.

9. At the end of the process, attach the anchors and install them in the prepared wells.

Conclusion

Now you know how to make a tent with your own hands, what materials and tools are required for this. Following the recommendations and instructions described above, you will be able to create a stable and reliable design.