BeautyNails

Why exfoliate gel-lacquer? Technology of application of gel-varnish

Many fashionistas resort to nail extensions with gel varnish, and a woman without such a manicure is difficult to meet today. It's a popular technology to start because of the longevity of the coating, and if the master has done everything professionally and correctly, the beautiful marigolds will delight at least a week, and when adjusted - even longer.

But there are times when such a plan manicure quickly starts to peel and flake. Today we will find the answer to the question of why the gel-lacquer exfoliates, and point out the frequent errors of the masters. But to begin with, we suggest that you familiarize yourself with the technology of applying the gel to the nails.

Gel-lacquer step by step

Many beauty salons and private masters have been offering manicure with gel-lacquer for several years already. This latest development has become the most popular. Today, varnishes from brand manufacturers, and inexpensive products of Chinese industry are also used. The technology of application is the same for all. So, how to professionally apply gel-lacquer step by step?

  1. First, you need to give the nail the right shape, trim the nail with a free edge, clean the plate of dust. It is important to remember that for a natural nail a saw blade with abrasiveness from 180 x 180 to 240 x 240 is used. If the edge of the nail is loose, it is necessary to saw it with a fine abrasive nail file.
  2. It is necessary to remove the cuticle, clean the nails with special means to remove the dust, used before the manicure cream and other substances.
  3. Using a coarse buff, remove the gloss from the nail (the upper keratin layer). Do not overdo it and put too much pressure on the tool, as you can remove a thicker layer, so that with each application of the gel varnish the natural nail plate will become very thin.
  4. With processed nails, you must remove all residues of moisture, grease and dust. For this, a bond (dehydrator, desiccant) is used. After the cleaning procedure, do not touch the nails with your fingers, avoid moisture.
  5. For a stronger adhesion of the gel-varnish to the nail plate, apply a thin layer of primer.
  6. Apply the basic gel-varnish to the entire surface of the nail, avoiding contact with the cuticle and the okolonogel skin. The layer must be thin. Apply lacquer rubbing movements from the butt to the cuticle, and then straight smears from the cuticle to the butt.
  7. Dry the nails under the ultraviolet lamp for a minute (ten seconds if the lamp is LED).
  8. After drying, the base is sticky, it does not need to be cleaned.
  9. Apply a thin layer of the selected gel-lacquer (color). If the layer is one, then the color will be slightly transparent, and if 2-3, then more saturated. Each of the layers should be thin and dried in the lamp for two minutes (in the LED-lamp - half a minute). The butt should be carefully painted.
  10. We cover the nails with a thicker layer of finish gel. It is necessary for gloss and strength.
  11. Dry under the ultraviolet lamp for two minutes (30 seconds under the LED-lamp).
  12. A sticky (dispersion) layer is removed from the surface of the nail by the clicer.

The most common errors of the master when applying gel-varnish

If, after a manicure, the gel-lacquer quickly flakes off (this can happen even in the first hours), then, during the application procedure, rough, but frequent mistakes were most likely. This can happen if the master is a beginner, unprofessional.

  1. Poorly removed from the nail the upper layer.
  2. Insufficiently degreased nails after treatment.
  3. Quickly exfoliate and polymerize too thickly applied varnish.
  4. One or all layers of lacquer was not dried.
  5. The free edge was not sufficiently sealed.
  6. Base gel is applied poorly, does not cover the entire surface of the nail plate.
  7. Low-quality tools or gel-varnishes were used. Perhaps mixed products of different manufacturers.

However, not only the master can spoil the manicure. Often the clients themselves are irresponsible to the procedure, starting during the session to touch their hair or clothes with their nails, and then they are wondering why the gel-lacquer exfoliates. It is important to remember that you can not interfere with the master until the end of the session and touch the nails.

What can not be done to keep the gel-varnish long?

When asked why the gel-lacquer exfoliates, there is another answer: clients often do not follow the elementary rules before and after the procedure. So, what can not be done?

  • In no case can you nail your nails after applying the gel. Many women try to eliminate the deficiencies of manicure at home, and this is fraught with the penetration of air between the layers of varnish;
  • SPA procedures and oil manicure can not be done on the eve of the coating of the nails with gel-varnish;
  • After the procedure, you must protect your nails from moisture, so cancel cooking, cleaning and other worries until the next day, or do it the day before;
  • After 12 hours, the manicure is no longer threatened, but it is better to hold the wet cleaning in special gloves.

Why does the gel-varnish exfoliate at the tips of the nails?

The most common reasons for this kind of exfoliation are the mistakes of the owners of the manicure. The master can give advice on the care of manicure, but many women do not listen to them. Why does the gel-varnish exfoliate at the tips of the nails? The reasons are as follows:

  • The nail plate is too short . The constant contact of the tip of the nail with the fingertip, on which the sweat and subcutaneous fat is collected, is fraught with consequences such as peeling off the varnish. Experienced master advises before applying the gel slightly to grow the nails.
  • Thin or too flexible nails . Gel cover, though strong, but bends together with the native nail.
  • Contact with water or chemical household products (especially if it is the first 10-12 hours after the manicure).

Exfoliate at the edges and near the cuticle: why?

Why does the gel-varnish exfoliate at the cuticle? The answer is only one: the woman tries to correct the manicure on her own. Many representatives of the fair sex can not for various reasons get into the salon to remove the gel or correction of manicure and independently begin to "bring their nails in order." Even with special tools, you can not get rid of the "step" between the overgrown and accrued nail, grinding it.

Many, resorting to such methods, are asked in the future the question of why the gel-lacquer exfoliates from the nails, and they write about the master not the most flattering reviews. Before you start an independent correction, you need to take a course of study.

Health status

The reasons why the gel-varnish from the nails exfoliate, there may be some deviations in terms of health:

  1. There are congenital or acquired irregularities of the nail plate. In this case, you will have to give up such a manicure, as it will quickly crack and begin to exfoliate.
  2. Reception of antibiotics adversely affects the nail plate. After the course of treatment, it is worthwhile to wait until the nails completely recover (this is not less than two weeks).
  3. Hormonal background. It is worth not to apply gel-varnish during pregnancy and breastfeeding, as well as a few days before and after critical days.

Conclusion

So, we looked at the step by step instructions of the manicure. If you follow it accurately, you can avoid questions from clients about why the gel-lacquer exfoliates. Every master is pleased when his clients become permanent, as they were satisfied with his work.

I would also like to say to those clients: we provided for reading all the most common causes of damage to manicure and answered in detail the question of why the gel-lacquer exfoliates. To preserve the beautiful result of the work of the master, do not neglect simple rules and advice!

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.