What kind of boarding for the bath is better: a comparative review, features and reviews

Clapboard is called a thin narrow board, equipped with a special lock, usually working on the principle of a spike-groove. The main advantages of this material are: ease of installation, environmental friendliness and aesthetic appearance. Initially, such boards lined the cars of passenger trains. Hence the name of this material. Use the lining can for facing buildings of various purposes. Very often this material is used, for example, to sheathe baths from the inside. In this case it is very important to choose the right kind of board. Further in the article, and we will understand with what kind of lining for a bath is better and how not to be mistaken when buying this material.

On what grounds can the board be classified

When choosing a lining in the first place pay attention to the following factors:

• The breed used for making wood;

• Class of material;

• Country of manufacture.

In any case, special requirements are imposed on the material intended for lining the bath, as it will subsequently be constantly exposed to moisture with a combination with elevated temperatures.

Cedar and pine

Coniferous board for the lining of steam rooms from the inside is used extremely rarely. The best answer to the question about what kind of lining for a bath is better, is this: hardwood. The fact is that the conifer board contains just a huge amount of pitches. Therefore, when heated, hard-to-reach, rapidly hardening "tears" appear on its surface. In addition, this material begins to emit a very strong smell. However, despite all this, some coniferous rocks for the lining of steam rooms can still be used. To such carry, for example:

1. Canadian or Altai cedar. This wood for baths is used primarily because it contains very few pitches. Even with strong heating, there is no special effect on the microclimate in the steam room.

2. Pine. This kind of wood is allowed to use only in the steam rooms with electric heaters. The fact is that such equipment warms up the air in the room not too much. Such a temperature, at which the resin begins to melt pine, in the baths of this type never happens. The wood of this rock is heated at elevated temperatures not too much. At the same time, it looks pretty beautiful. When using a wood-fired or gas-fired sauna stove, only the dressing rooms can be trimmed.

Alder, linden, aspen: what is better?

Hardwood paneling for the sauna is better than coniferous. In principle, almost any such board is suitable for covering the steam room. You can use for this purpose even, for example, inexpensive birch. However, if you are interested in the answer to the question about what kind of lining for a bath is better from hardwoods, then such are:

• alder;

• Linden;

• aspen.

The board made of such wood, differs simply remarkable operational characteristics, looks beautifully and serves very long. These varieties of material are worth more than birch, but the bath with their use is much more comfortable and convenient for people taking water procedures.

As you can see, there is a different lining for the bath. Which is better? Prices, for example, on the alder board at most suppliers are not too high. This is a very good option. In this case, such a board is not at all afraid of prolonged exposure to moisture and does not heat up in the steam room. However, at elevated temperatures, alder begins to release a slightly bitterish smell into the air (in principle, not too unpleasant).

Lime lining is more expensive than alder, but it can last much longer. In addition to good resistance to moisture, this board also has the advantage that it is never damaged by wood bugs. Burning about such boards during the adoption of water procedures, as they do not heat up, is impossible. It is believed that it is the lime vagonka for the lining of the baths that fits best.

Aspen, as well as alder, can release a bitterish characteristic odor into the air. Such boards usually serve for a very long time. But only in the event that in the process of operation they will not be damaged in any way. Around any scratch or cleft on the aspen board, a rotten plot can quickly form.

What is the best way to sew a bath: an African novelty

Recently, many wealthy sauna owners prefer to trim the steam room with a board made of Abash wood. It looks like this material on the walls and ceiling is simply superb. Abash tree in Africa grows. Its main advantage is the ability to remain pleasantly warm even at a very high air temperature in the therma. The lining of the abash is not heated, including in places located in the immediate vicinity of the stove. The color of the board of this variety has a pleasant beige.

Which lining is better for a bath: a comparative review of the material by class

Apart from everything else, the lining produced by modern industry can differ in class. According to this feature, there is a board in the market mainly in three classes: A, B and C. For parilocks, only a lining marked with the letter A is usually purchased. Such material, according to the standards, has practically no damage and contains a very small number of knots. In extreme cases, you can buy a steam room and less quality cheap lining B. The material marked with the letter C, for humid premises is absolutely not suitable.

Very often, for baths, a "Elite" or "Premium" board is also used. Such material looks very solid and neat and serves a long time. However, the board of this variety is also quite expensive.

Comparison of domestic material and imports

Next, let's figure out what kind of lining is best used for a bath - domestic production or imported. On the Russian market today there is a board of both types. At the same time, the most popular among the owners of baths in our country is using a domestic lining. The quality of Russian material is quite decent. It is worth it much cheaper than imported.

Evrovagonka for bathing baths, of course, can also be used. From domestic imported material differs mainly only in more accurate compliance with standards. All the boards of foreign production are carefully sized. Domestic lining in some cases may have a slightly inappropriate width declared by the manufacturer. In addition, foreign-made boards differ with a deeper lock slot.

Select by appearance

Deciding which lining for a bath is better, among other things, you should pay attention to how this material looks. Previously, in the building supermarkets, only one type of sheathing of this type was sold - a flat board. Today, if you want to finish the bath you can also buy a special lining - block house. This is the name of the board, which in appearance looks like a very smooth narrow croaker. Fixed on the wall, this material is incredibly realistic imitating a log.

In addition to the usual material and block house, in our time there is also an American board for sale. This option is also a good answer to the question of what kind of lining is better to trim the bath from the inside. Board of such a variety on the wall imitates the cant. Looks vagonka-American is very beautiful. However, its use is only for facing baths of a very large area. The fact is that this material has a considerable thickness.

Processing of lining

On the market, such a board is already fully ready for installation. However, since the microclimate for wood in the bath is not very favorable, it is desirable to process the bale before installation . Most often, for this purpose, an inexpensive drying oil is not used to release harmful substances into the air. However, unfortunately, this finish is not too durable. Therefore, deciding which means to better process the lining in the bath, many owners of suburban areas choose a special oil. This material also does not emit harmful substances into the air and lasts much longer than linseed oil. But at the same time oil costs, of course, a little more expensive.

Cost of lining

Of course, one of the main factors that affects the choice of the variety of the board is the price. The cost of the lining depends primarily on its thickness and width, as well as the type of wood and the quality class. For example, the price for a lime board of 14 x 96 x 1000 mm "Extra" is approximately 550 rubles. Alder board of sort А 14 х 80 х 2700 mm costs about 250-270 rubles. For aspen material 12.5 x 42 x 500 mm Class B will have to give 100-120 rubles. The cedar lining of the variety "Extra" 14 x 85 x 2500 mm costs about 1500 rubles. The price for the block house Abash 16 x 85 x 3000 mm is about 1200-1300 rubles. Prices are per 1 square meter of material.

Feedback on the lining as a bathing panel

Thus, we have found out what kind of material is like a lining for a bath. Which is better (reviews about all the above types of such plating are only good), the board is suitable for facing the steam room, the owner of the suburban area should decide according to their preferences and capabilities.

The most popular kind of material is, of course, a hardwood board. The choice of cedar for plating many owners of baths is also quite approved. But since coniferous wood is still heated stronger than deciduous wood, the wall behind the canopy in this case, the opinions are advised to be covered with alder or aspen.

Abash for a bath at the majority of visitors of specialized forums is considered a material simply ideal. However, most of the owners of suburban areas call it still too expensive. Therefore, it is usually advised to use it only for making canopies and benches.

Lime from the owners of villas deserved exceptionally positive reviews. This material is not only not heated, but it smells very nice. As a result, a completely unique, precisely traditional "bathhouse" atmosphere is created in the steam room.