What is a shock absorber gas furniture, and how does it work

A wide spread in the furniture industry has found a gas furniture shock absorber, which creates comfort and convenience in the use of cabinet furniture, cabinets, beds, etc. Without it, the doors do not press tightly, they grunt, but it is necessary to install the gas lift instead of the usual loops, as everything changes. Trading networks offer a variety of options for opening systems for furniture at an affordable price. There are different sizes, stem extrusion power, colors, ways of fastening, configurations.

How Gas Lift Works

Shock absorber gas furniture consists of a cylinder, stem, seals and bearings of friction. The product is assembled in such a way that the rod is inside the cylinder in absolutely hermetic state. Inside there is a gas, thanks to which the rod moves. It is necessary to pull the door of the cabinet or bed area to yourself, as the gas lift will react immediately, smoothly pushing the piston, making the opening. Due to the oil filler gas lift works in both directions. When opened, the oil flows into the lower part and holds the leaf, preventing it from closing. But it is necessary to press on it to close, as the shock-absorber smoothly will work in the opposite direction, pulling a door behind itself.

Types and forms of shock absorbers

There are several types of gas lifts in their internal construction. Depends on the difference between the place of use. If you plan to install furniture gas shock absorbers on the built-in kitchen furniture, then one type is used. The seller-consultant will always tell you what gas lift will be needed for this or that furniture. If you need furniture gas shock absorbers for the bed, then this is another size and, accordingly, the price. In addition to appearance, there are gas lifts of different colors, which gives the furniture an original appearance, especially if the cabinets have transparent glazing.

Shock absorber gas furniture can be assembled with a structure that has a trapezoidal assembly of metal tubes or plates using springs. These are lifting elements that are installed on beds, sofas, armchairs, ie, where the lifting of a heavy object is planned. The need arises from the fact that the shock absorber alone will not be able to cope with the opening, which is the reason for its quick failure.

Installation and dismantling

Shock absorber gas furniture quietly lends itself to the installation, which allows you to replace it with any furniture. The gas lift shaft is attached from below, and the sleeve is installed in the upper part. Fastening elements must be carefully tightened, so that in the future, when the shock absorber, they do not become loosened. It is also necessary to mount in such a way that the eyes of the gas lift do not come into contact with other parts, which will greatly impede the stroke of the rod and the opening. Installation is made only with the shock absorber open.

Disassembly is carried out in the reverse order when the position is open. A prerequisite is careful not to damage the mirror surface of the rod. After removal, do not compress the gas lift for storage or transportation. Any mechanical action on the rod (scratches, foreign objects) will shorten its service life, because it will disrupt the internal mechanism.

Important!

Before installing the gas lift, it is necessary to familiarize yourself with the installation and use instructions in order to avoid injuring the hands and damaging the product. Also, you can not try to open the shock absorber gas furniture for the purpose of curiosity or repair. It contains gas under high pressure, which can lead to serious injuries.