What heat radiators are best used for gas and solid fuel heating methods?

When installing a water heating system, much attention should be paid to the choice of radiators, because they play a significant role in heat transfer, as well as maintaining the set temperature in the room. The type of your heating is also important here, since it depends on the choice of the material from which it will be most rational for you to install a heating system.

When answering the question which radiators are better, it will be hard to answer. The fact is that every metal or alloy from which sections of modern radiators are made has its advantages and disadvantages. However, in some cases, the disadvantages of one material may be an advantage in another, with different types of heating.

If you live in an apartment with central heating, then traditionally used cast-iron radiators, which have been successfully standing here for more than a dozen years and have proven themselves with a very good side. Cast iron has a high heat capacity, which allows it to warm up the room well enough, and the temperature of the coolant can reach 90 degrees, which is absolutely safe for it. Therefore, in central heating systems, when answering the question of which radiators are better, it can be safely asserted that cast-iron ones. The only drawback of such batteries is their obsolescence and inconvenience in maintenance, if you use an old type of cast-iron radiators. Today, modern cast-iron heating systems are also on sale, which have a good design and modern style. The only great weight of this metal makes its installation a laborious and expensive process. In all other respects it is a fine radiator, which will serve you faithful and long service. Remember also that cast iron has good resistance to corrosion processes, and also is not afraid of corrosive substances that may be present in the liquid coolant.

What heat radiators better and more efficiently heat the room when using a solid fuel boiler? This is also a serious enough question, to which only those who understand the properties of the material used and the principle of heating with different types of fuel will be able to answer. In the case of using coal and firewood as fuel, the heating process will be of a long duration. For high-quality heating of such a room, steel and aluminum radiators can be used , which will immediately transfer heat to the room, as this metal quickly heats up. However, the same can serve as a certain drawback, since after damping the boiler and stopping the heating of water, such radiators quickly cool down and the heat disappears. Which radiator of the stove is better to use in such a case so that the heat is stored for as long as possible in your room? To do this, again, go back to the cast iron, because it continues to radiate the heat for as long as possible, even after the boiler with coal and firewood has gone out for a long time. In houses with conventional solid fuel boilers, this is the only correct option to exclude the need to get up at 3-4 o'clock in the morning and put another batch of firewood into such a boiler. With good cast iron radiators, you can be sure that with a good warm-up they will keep the heat perfectly until the morning.

And here what radiators of heating are better for using in case of independent gas heating. Here it is most rational to use just aluminum batteries, because they are the most fully fit in their technical characteristics of this type of heating. It is with these radiators that the automatic maintenance of the set coolant temperature will be realized as efficiently as possible.

Each landlord, after all, decides for himself which heating radiators are best suited in his house. The main thing to remember is that cast iron remains the most rational solution in homes with solid fuel boilers, and with autonomous gas heating, the most suitable option is steel or aluminum batteries.