"Warm house" - a liquid for heating

"Warm House" is a liquid that is a modern non-freezing composition made of high quality ethylene glycol. This mixture is intended for use in various heating or cooling systems, as well as for industrial air conditioning.

Use this antifreeze can be at a temperature range from -65 to +122 ° C. The additive package consists of 10 substances that impart anti-foaming, anti-corrosion and stabilizing properties to the heat carrier in the operating temperature range.

Description

"Warm House" is a liquid that is a concentrated antifreeze produced using a combination of anti-scale packs, as well as other additives. All these ingredients are used to produce heat transfer media that have a lower crystallization temperature, that is, freezing.

Reducing the amount of ethylene glycol makes it possible to increase the thermal conductivity and heat capacity, which reduces the freezing point. The viscosity of the solution is reduced, and this has made it possible to improve the circulation of the coolant in the system, increasing the heat transfer.

"Warm House" is the liquid that best suits its thermophysical properties for the climatic zone of central Russia. The best are those antifreezes that begin to crystallize at a temperature of -25 ° C. If we are talking about the described solution, then it freezes at lower temperatures.

Why choose antifreeze brand "Warm House"

Non-freezing heating liquid "Warm house" can protect the heating from destruction, which is ensured by the thermophysical characteristics of the composition, even if the system encounters an emergency stop problem. Pipes are not destroyed, because the composition at lower temperatures turns into a jelly-like state.

If heat carriers are used in which the content of ethylene glycol is high, this can cause deposits on the surface of the heating elements or in the burner region. Among other things, you may encounter the problem of formation of resinous sediments, as well as overheating of heating elements.

In order to obtain an aqueous solution with the required operating temperature, it is necessary to dilute the Warm House battery liquid with distilled water or taken from the water supply system.

Recipe for the preparation of 100 liters of a solution of concentrated coolant

"Warm house" is a liquid that can be used to prepare a ready solution poured into the heating system. The proportions of the ingredients will affect the temperature of the onset of freezing or crystallization. Thus, if 77 liters of coolant are added to 23 liters of water, the freezing temperature will be kept at -40 ° C.

Adding 65 liters of coolant to 35 liters of water, you will achieve that you create a solution that will freeze at -30 ° С.

Forty liters of water and 60 liters of coolant will allow to obtain a solution that will begin crystallization at 25 ° C below zero. If the thermometer in your house does not drop below -20 ° C, then 54 liters of coolant will be sufficient for 46 liters of water.

Recommendations for use

The Warm House liquid can be diluted with water from a well or well, but it should be noted that in this case, you may encounter an increased content of metals and salts. In order to avoid problems in the operation of the heating system, a small amount of coolant must first be mixed with water. Use for this you need a transparent container. As a result, you should get a clear solution, so that you can make sure there is no sediment. Such mixing can be carried out before the gulf in the system, especially with circuits with natural circulation.

The described coolant is characterized by high stability of thermophysical properties, therefore it will be able to ensure continuous operation of the system for 5 years. Through this period, the coolant will be a low-freezing liquid, but it can already be considered a solution that has depleted the resource of additives, because of what you can face an increase in scale and corrosion. Therefore, the coolant is drained and disposed of. Before filling a new batch, the system is washed with water or a special liquid.

Dependence of the life of the coolant on the operating conditions

The Warm House fluid will last longer if you provide it with the appropriate operating conditions. So, experts do not recommend pouring liquid into the system, which is equipped with galvanized pipes. This causes a possible probability of galvanizing peeling, in addition, a precipitate may fall out. In addition, the described heat carrier can not be used in heating, where there is an electrolysis boiler of the type "Galan".

The heating fluid should not be mixed with other antifreezes, as this will cause a decrease in performance, as well as possible damage to the equipment. The heat carrier should not be brought to the boiling point during operation, since ethylene glycol and additives will be decomposed while their thermophysical properties inevitably deteriorate, due to which the coolant will serve less than the required time.

"Warm House" is a heating fluid that can be used exclusively for technical purposes, because ethylene glycol is toxic. In order to exclude poisoning, it is necessary to take care that antifreeze does not get into drinking water and food products. If he was on clothes or exposed parts of the body, then wash them with water and soap. The heat carrier is explosive and fireproof, it has certificates of compliance and a conclusion on sanitary and epidemiological standards.

Additional properties of the heating medium for the heating system

In order to ensure the necessary circulation of the antifreeze in the system, it is necessary to supplement it with a more powerful circulating pump in comparison with that used for working with water. Performance and power should be increased by 15%, and head - by 50%.

At negative temperatures in the system, the heating of the coolant should be carried out gradually, and the power should increase step by step. The equipment should be calculated and designed taking into account such thermophysical characteristics, which differ from those that are suitable for water. This applies to air conditioning systems, etc.

"Warm House" is a heating fluid that has a higher coefficient of volumetric expansion if compared to water. Therefore, you need to stock up an expansion tank of more impressive volume. Before you start pouring a new coolant into the system, it is necessary to check all the connections and assemblies, especially when using antifreezes on propylene glycol.

For reference

The non-freezing liquid "Warm House" is sold in tare. If necessary, you can buy antifreeze and in plastic packaging, the volume of which is limited to 10, 20 and 50 liters. Under the order you can buy a barrel with a volume of 216 liters.

Sometimes the mixture is shipped in bulk, in this case, as a rule, gasoline tank trucks and cubes are used. If the order is from 2 tons, the heat carrier can be made as a water-glycol mixture with a crystallization temperature at any level that is selected by the consumer.

Conclusion

The liquid for heating systems "Warm House" is a perfectly suitable mixture for individual use. However, before acquiring it is necessary to calculate whether you can completely replace this compound after 5 years, since during this period of operation the additives will lose their anticorrosive properties and deplete the resource.