Plastic bath for a bath (photo)

The font in the bath is a small pool filled with cold water, which is used for dipping after leaving the steam room. Various materials are used for the production of containers, plastic variants have become most widespread. They can have a variety of colors, installation method, manufacturing method, shape and volume of water. Also a font made of plastic for a bath is often supplemented by a variety of equipment and accessories, it can be lighting, a thermostat, heating elements, a bench or a hydromassage.

The form

Mini-pool can be performed in a stepped, round, angular, square or usual oval shape. There are not only single options, some of them can accommodate up to ten people.

A plastic font is produced by the method of rotational or vacuum forming, and also the sections can be welded to the shop or on site of the intended installation. Capacity can be in any convenient place both in a washing room and in the open air with full or partial penetration into the soil. Used for the manufacture of fiberglass, polypropylene, acrylic, polyethylene and composite materials.

How not to make a mistake with the choice

If there is enough space in the room, the best option is the corner construction. It retains a useful space and simultaneously houses a large volume of water.

The heated plastic font has high strength, airtight construction, a long period of operation, a guarantee both on the bowl itself and on the accessories. If there is no possibility to install a standard-sized container, individual manufacture according to the selected parameters is possible. The bowl provides an opportunity to relax after a hard day, improve the design of the sauna room and enjoy the sauna.

Benefits

Color performance can be very diverse. In this case, the hue remains unchanged throughout the life of the product due to the fact that the surface is resistant to the negative effects of ultraviolet radiation. Thus, a plastic font for a bath, the photo of which is presented above, for a long time pleases the owners, regardless of their location.

Also, there is no need for special maintenance, and any equipment is installed only at the request of the owners, since the design does not require an addition. Resistance to the influence of aggressive cleaning and disinfecting agents provides easy care.

Do not apply additional external coating, as the containers are ready for use.

Possibilities of use

A plastic dome is most often mounted next to a bath and acts as a pool for health and tempering activities, the water temperature is selected depending on personal preferences. Everyone knows that contrasting water procedures provide a healthy skin tone and reduce the susceptibility of the body to colds. Being an important part of the sauna or sauna, the tank fully replaces the winter hole or lake on a hot day.

The font from plastic in wood or in standard execution is characterized by extensive possibilities of application. When installed outside the sauna, for example, on the house territory or veranda, it becomes a pool that saves from the summer heat, and provides the possibility of carrying out hardening procedures. Also it should be noted that there is no need for long-term installation and overall compactness. That is, in comparison with the usual pools, they need less care, but they can provide all their functionality.

Material specifications

The material is not influenced by chemicals and is resistant to corrosion and rot. The simplest version can be equipped with any desired accessories and additional elements.

The plastic has a sufficient level of strength, so the containers can be operated without problems for 50 years.

The method of installation is determined by the selection of a certain type of font. Lapidary options are installed in any desired place, work with concrete pools should be carried out in the process of construction. In order not to be mistaken when choosing an open design and to choose the appropriate design, shade and dimensions, it is advisable to purchase after all the repairs are completed.

Installation

A plastic dome with your own hands is installed much easier than versions from other materials. After the purchase and delivery home, you can begin installation. Pre-prepared area on the street or in the bath. It is possible to build a frame made of wood, it must fully correspond to the dimensions of the container. Then the product is lowered into the frame, and there must be a free space between the slats and the walls of the pool. Subsequently, it is decorated with the same wooden elements, which were used as side panels.

Externally, the font after the installation is completed will not differ from the wooden one. The difference can be seen only if you approach it.

Varieties

The characteristics of the tank are directly dependent on the method of installation, so it is necessary to carefully select the species in accordance with the needs. There are three main classifications: flooded, open and in-depth structures, each of which has its own placement features.

Pouring a font from plastic is fixed on the wall or ceiling of the sauna. When the lever element is tensioned, the container with water tilts. After the design takes its original location and begins to receive water. Among the advantages is worth noting the cost-effectiveness of consumables, compact dimensions that provide installation anywhere, and easy installation.

The deepened basin is a font with a great depth with an average width and length with a ladder addition. The choice of this structure should be carried out in the process of creating a bath. The best option is to place in the waiting room. In addition, you can install a container near the house or sauna.

An open tank is a plastic bunk with a connection to a water pipe and a sewage system, and located in the floor of the room or in the ground. This option has become the most common for self-installation, especially in the absence of the possibility of installing a more complex design. The assortment of shops is presented by various preparations both from plastic, and from other materials which are enough to fix in a desirable place at any stage of creation of a bath.

Polypropylene and composite materials

One of the simplest and at the same time durable options are fonts made of polypropylene plastic. They are represented by various shapes, dimensions and have a smooth, smooth surface, pleasant to the touch. The sheets of this material can be welded in the room itself before installation.

Products have gained their popularity due to significant savings in useful space, simple operation and other advantages. There is an extensive selection of species offered by companies specializing in their manufacture. It is possible to equip with light elements, heating appliances and other additions that are necessary, in the opinion of the owners.

Sufficiently in demand products made of composite materials, they have a decorative outer surface, glass fiber reinforcement and light weight. The main advantage is the ability to choose from a large number of forms of performance: including square, triangular or round. They are supplemented by a backlight, a bench, steps for easy lifting. In this case, the choice is limited only by personal preferences and financial opportunities. Their shade does not turn pale with time, and can have a different saturation.