Pattern of a man's T-shirt: construction of the base, model

How wonderful to make a gift to a loved one, a man! And how nice it will be for him to wear a thing sewn with the caring hands of mom, wife, beloved! In this article, we propose to consider the patterns of men's sports shirts and raglan, as well as some recommendations on their tailoring.

Men's T-Shirts

Each man in the wardrobe necessarily has several types of T-shirts, which he wears depending on the season, events (business meeting, going to the office, meeting, rest) and mood.

But there is a certain unofficial classification of them:

1. T-shirt is white (more often it is made of cotton fabric) - worn on formal, solemn events or just for a walk on a yacht or around the city with family.
2. With a V-neck is often chosen by a man for relaxation, walking near the water, on the beach. And also preferable as a sports men's T-shirt.
3. "Polo" - from cotton fabric, with a small collar and several buttons. Favorite of many men, regardless of the nature of activities and tastes.
4. "Hanley." It is also a cotton T-shirt, without a collar, but with a few buttons. You can wear instead of "Polo".
5. "Rugby" is the most favorite part of the wardrobe by many men. It has a collar and a small incision in the neck area, but has no buttons. As a rule, it is sewed from a very durable fabric, which is not at all afraid of repeated washing.

Pattern for men T-shirt

How to sew a men's t-shirt? Next, we will consider a simple straight cut model. Measure with this method is the minimum amount, which greatly facilitates the task.

Thus, it can be noted that such a cut minimally takes into account the features of the figure of the person for whom this t-shirt is made. It is always better to start with a simple one. And already becoming more experienced master, you can take on more complex types of cuts, which take into account and shoulders, and posture and so on.

Building a pattern backless T-shirt

In order to accomplish the intended task, it is necessary to remove such measures:

• The neck is hemmed;
• Half-mantle of the chest - Cr;
• Height of the product - Di;

Starting to build a pattern of a male T-shirt, according to the obtained data it is necessary to construct a rectangle, the width of which (AB). In fact, this is the width of the future T-shirt and consists of a half-breasted chest plus a small allowance for the free fit of the body. The range of increase for the men's t-shirt chosen by us can vary very much. In this case, it is sufficient to stop at 10-12 cm.

And the height of the rectangular workpiece (AN) will be equal to the measure of the height of the product.

Therefore, the figure shows that AN is the middle of the back of the T-shirt, and BH1 is the middle part of the shelf. The top line - AB - is the shoulder level line, and the line that is below, - HH1 - is the bottom line.

The construction of the chest line, the width of the back and armhole

We set aside from the point "A" a third of the taken measure of the semicircumference of the chest. Next, add to this value of 8 cm. Denote this by the point "G". Now it is necessary to draw a horizontal line from the point "G", which will intersect with the transmission line. This will be the "G1" point. Thus, the line of the chest came out.

On the right side of the "G" horizontally (breast line), one third of the value of the semicircle of the breast should be deposited and 6 cm added to this indicator. Denote this point as "G2". From it vertically upwards it is necessary to draw a line, which when crossing with the shoulder line gives the point "P".

Now you need to determine the width of the armhole:

• To the right of the point "G2" along the chest line, put off a quarter of the value of the mid-breast. Add 4 cm.
• A new point is called "G3". The distance (T2-T3) is the width of the armhole.
• Vertically upward from the point "G3" you need to draw a line. The point of its intersection with the shoulder line is "B1".

• The width of the armhole is divided in half. Then the dot "G4" is indicated on the pattern.
• From point "G4" vertically upwards the line is directed straight to the bottom line. The point of their intersection is designated "H2". This is the line of the side cut.
• Further from point A to the right along the line of the shoulders, one third of the value of the semicircle of the neck must be deposited, adding to this value another 1 cm. The resulting point is "A1".
• The line (A-A1) is the width of the sprout.
• Further, vertically up from the point "A1" a line is drawn, which will be the height of the sprout. And it is equal to half the width of the sprout minus 0.5 cm. The resulting point will be called "A2".
• The line (A1-A2) is the height of the germ.
• Now it is necessary to design the throat part of the back. For this point, the points "A" and "A2" must be connected by a smooth concave line.
• From point "P" vertically downwards it is necessary to postpone 2 cm and denote the point "P1". Next, draw a segment from the point "A2" through "P1", slightly extending by 1-1.5 cm. The point "P2" is obtained.

Pattern of the back of the men's t-shirt is ready.

Building a pattern of handed t-shirts

The next stage of work on the design of a male T-shirt is a cut-off (transfer):

• The width of the neck of the shelf corresponds to the width of the neck of the backrest (sprout). In addition, according to the technique in question, the height of the throat is equal to its width.
• From "B" to the left horizontally and downward along the vertical, it is necessary to postpone the number of centimeters to which the line (AA1) is equal. The points obtained are designated "B2" and "B3", respectively.
• Thus, BB2 = BB3 = AA1.
• Further it is important to form a line of the neck of the shelf: from point "B2" to point "B3". This can be done with the help of a compass.
• Vertically down from the point "B1" it is necessary to postpone 4 cm. The new point is "P4".
• Now from "B2" through "P4" it is necessary to draw the shoulder line, extending it by 1-1.5 cm. The resulting point is "P5".

The construction of the main part of the pattern of the transfer of the male T-shirt is completed.

Construction of a sleeve pattern of a sports men's T-shirt

First, here too You need to take measurements. One measure - from the axilla to the shoulder, and the second - from the shoulder and along the arm to the desired length:

• From point "A" to point "B" determine the center - point "C".
• Down from the "A" and "B" it is necessary to make stretches equal to the tenth part of the exhaust gas. New points "E" and "E1" are formed.
• By connecting them, it is necessary to continue to draw the lines in different directions for a length equal to AC. The points "F" and "F1" are formed.
• Further, the segment BE1 is divided in half, forming a new point "D1". And from the "E" up you need to put half of the segment AE plus add 1 cm. The point "D" was obtained.
• Now from the "C" down, draw a perpendicular line, the length of which is equal to the length of the sleeve. The new point is designated by the letter "I".
• From it in different directions it is necessary to postpone FF1 for 2 cm, thus obtaining "L" and "L1". Now you need to connect them to "F" and "F1".
• Thus, by combining F, D, C, F1, D1 with a solid and smooth line, we obtain the pellet line of the sleeve of the T-shirt.
• From "C" down, it is necessary to postpone on the CF line 11 cm and denote the double stroke, and then along the CF1 line - also 11 cm and mark the single stroke. These are important labels where the sleeve will be sewn into the armhole of the product.

T-shirt with a sleeve of raglan

The fabric for it can be both knitted and cotton. In addition, the ribbon may be needed (for complete processing of the cuts).

What is a raglan T-shirt? This is when the sleeves of the product are wrapped together with the shoulder part and the backrest. The neck smoothly passes into the shoulders, if you speak in plain language. Consider the construction of a pattern of T-shirts raglan.

For starters, there are a few general recommendations:

• To ensure that the fabric in the places where the seams are made, remained elastic, the details of the pattern must be worn with a narrow zigzag stitch.
• And in order for the lower edge to remain stretchable, it is necessary to sweep the hem with an overlock. Then pritachat, using for this purpose a double needle.
• The same applies to finishing other edges of the product, it is important that they retain their elasticity.

As for the pattern of a men's raglan shirt, in some ways it is similar to the pattern of a normal sports shirt. In the figures, the contour lines of the construction of the back and forward, as well as the sleeves are visible.

The measurements are the same as for a normal T-shirt: the neck, chest, the height of the product and the length of the sleeve, only now considering that it will go from the neck.

Raglan is built on the pattern of the front and back halves. From the highest point of the shoulder along the neck line, put aside 4 centimeters. And now it is necessary to combine these points with the highest point of the lateral seam. Details of the raglan are separated and transferred to the sides of the sleeves corresponding to them.

When all this is done, it is necessary to remove raglan details from the front and back of the pattern.

All the details must be signed, so that when sewing a T-shirt, nothing is confused.