Paint for metal hammer: manufacturers, types, applications

Painting metal can not be called a very simple matter. To begin with, you should choose the right material. Paint for metal hammer is perfect for both decorating the surface, and to protect it from corrosion.

What is the product?

It should be noted that the substance is used as a three-component formulation. It is simultaneously an enamel for surface decoration, a converter for rust, and also a protective anti-corrosion agent.

Paint for metal hammer is made on the basis of synthetic resins, to which are added solvents that have the property of quick drying, as well as glass particles, pigments. Thanks to them, this relief is provided.

The paint for metal hammer has undeniable advantages, which expand the field of its application.

Advantages of the tool

Now it is necessary to understand why it is in such high demand. Paint for metal hammer has such advantages:

1. There is no need for primer mixtures for surface pretreatment.

2. The ability to color even rusted products without cleaning.

3. The present means reliably protects the surface against the re-occurrence of rust and corrosion.

4. Paint for metal with a hammer effect creates a reliable and durable layer, not skipping moisture.

5. Still it is necessary to note variety of shades of means.

6. In addition to metal, paint can be applied to wood and plastic.

7. You can use the product to decorate not only internal, but also those surfaces that are located on the street.

As you can see, the substance presented has many good qualities that increase the demand for it in stores.

Types of products and applications

If you need just such a paint for metal, the hammer effect depends on the type of substance.

First, let's look at exactly where you can use the tool. It is used for coating:

- Metal pipes, doors, stairs.

- Fences and fences.

- Radiators.

- Garden tools, appliances and furniture.

- Garage doors.

- Decorative elements inside and outside the room.

Now it's time to start classifying the material. There are several types of paint :

1. ML-165. High-quality liquid for decorating any non-greasy surface. It is heat resistant and durable. However, in the event of a fire, it is capable of releasing toxic fumes.

2. Paint for metal Hammerite hammer . It is quite expensive, but very high quality. The substance perfectly protects the surface from oxidation.

3. NC-221. This is the cheapest enamel, which does not have a protective function. It can only be used indoors.

Technical characteristics of the tool

The presented product has such features:

- Time of full drying - 2 hours.

- Resistance to abrasion and adverse conditions - not less than 8 years.

- Consumption - 4 square meters. M. Area will have to spend about 1 liter of liquid.

- Repeated layer can be applied only after 4 hours.

- The temperature at which you can carry out work is 5-35 degrees Celsius.

Staining steps

There are several stages of work:

- Substrate preparation.

- Surface treatment with rust converter and priming enamel.

- Application of hammer paint.

- Allow the coating to dry completely.

Features of preparation of the base

In order for the enamel to adhere well to the surface, the latter must be thoroughly cleaned and treated with a degreaser. Otherwise, after drying, the layer will begin to crack. Do not degrease at least two times. After that, treat the product well with acetone. Check if there are any greasy spots on the surface. To do this, you can apply the usual blotting paper.

If you bought a new, sleek and shiny metal in the store, it's better to treat it with a grinder. This will increase the adhesion of the paint to the surface. For grinding, sandpaper with a grain size of 40-60 or a small brush can also be used.

If the product has been previously painted with bituminous paint, this layer must be removed, rinsed with a soap solution and air dried. Non-ferrous metals and aluminum are pre-primed. If the hammer paint for metal for outdoor works will be used for wood processing, then it must also be prepared. To do this, apply acrylic primer to the surface , soluble in water.

Features of spray application

Before starting work, paint for metal and rust Hammerite hammer must be slightly diluted with a solvent. This fluid is better to buy from the same manufacturer. Dilute the paint in this ratio: 1 part of the solvent and 2 - enamel. However, this option is acceptable if the air temperature during operation is 18-22 degrees. If it is below 17 degrees, then the amount of solvent is better reduced.

Check the viscosity of the liquid without the use of special devices. To do this, place the paint in a clean container, add a little solvent to it. If the jet is interrupted after 2-3 seconds - the solvent may be small.

It is applied in this way hammer paint on metal and rust on large flat surfaces in several layers. Between them there should be a time interval of 30 minutes. In this case, the first layer should be very thin, and the last layer should be as thick as possible.

Application of paint roller and brush

Hammerite - paint for metal with a hammer effect, which has just wonderful reviews. Users note the richness of shades, the durability and practicality of this tool. However, when working with such an enamel, it is better to choose the right tool with which it will be applied.

For complex vertical surfaces such as handrails, fences or fences, it is better to use a flute brush with natural bristles. The maximum number of layers is 3. The special attention should be paid to joints and corners. The fact is that this area is susceptible to corrosion first of all. Note that the total thickness of the layers should be equal to 100 μm.

Large surface areas can be treated with a roller. In this case, it will suffice to apply only 2-3 layers. The paint must first be diluted a little. The ratio here should be as follows: 9 parts of the agent per 1 part of the solvent. It is better to use a special liquid from the same manufacturer. The roller should be woolen or short-haired fur. Only in this case the coating will be reliable and beautiful. Note that the work needs to start from the corners, as well as the edges.

If the applied layer has already hardened, then the paint can be repainted only after a month and a half. Also, some recommendations for working with the presented material should be observed. So, if dilution of the paint is not necessary, then it is better not to produce this procedure. The fact is that you can break not only the consistency of the liquid, but also spoil the final result.

When working with a brush, the amount of ink lost increases. As for the nebulizer, this mechanism is not very recommended for the application of this type of substance. The fact is that the paint contains small additives that provide relief to the decor. They can clog the nozzle of the spray gun. In this case, the device is susceptible to breakage, and the coverage will not be very high quality.

Do not work if the weather is wet or windy. In this case, waves or other surface defects may appear. The amount of solvent should not exceed 10% of the total mass of the mixture.

Is it possible to make such a substance in the home?

Today, the market for building materials can find a large number of popular manufacturers of hammer paint: "Hammerite", "Hamerton", "Rolaks, Dewilex, Bianca, Kobe." However, some hazyaev prefer to make the presented material with their own hands, and the result can be very good .

For work you will need such materials: silicone oil, aluminum shavings, soot, UV varnish. The last component is the main one and it should be the most: 98%. Thanks to the soot, you can achieve not only a dark shade, but also a surface relief. Metal shavings, the amount of which is 3-6%, provides the hammer effect.

So, work should begin in a warm and clean room. For dilution, select a well-washed container. For stirring, you can use a drill with a special nozzle or do everything manually. The work consists of several stages:

1. First, connect the 3 main components. Next, you need to mix all the ingredients very well. Ready solution is considered only when the metal chips cease to float.

2. If you need to change the shade of the mixture, then you can add color or colored enamel. But be careful, it should be no more than 30% of the amount of the composition.

3. In order for some of the solution particles to harden and you have a hammer surface, add 4 or 5 drops of silicone oil to the tool.

As you can see, the presented paint at home is not difficult to do. You just have to keep the right proportions of ingredients. Here, in principle, and all the features of the hammer paint. Good luck!