Owl made of polymer clay: master class

Owl made of polymer clay is a simple and fascinating modeling that can be done by yourself or together with a child. To create products, use both a self-hardening polymer and a baked one. With modern plastic it is quite simple and easy to work with. How is the owl made of polymer clay? Master class, the photos below will help you to understand this. As you will notice later, the process will be easy and entertaining.

A bulk and flat owl made of polymer clay

So, let's proceed to modeling a voluminous owl made of polymer clay. To do this, roll a small ball approximately with a walnut, then mold out the oval from the rolled ball. Leave one third of the oval on the head, the body of our owl will be created from the remaining two parts. Squeeze and form the head of your owl. After that, you need to make holes for the eyes. They can be made with both hands and the back of the ballpoint pen. After that you need to blind two ears.

Now you need to insert purchased in the store or made pre-eyes. They need to be pressed into the eye sockets of an owl. You can both use ready-made glass eyes, and dazzle yourself from clay. For what you need to roll two identical balls approximately 5 mm.

Do not forget that the owl is a bird of the night, and its eyes are large enough, so observe the proportions. Place the eyes in the oven, then paint the pupils with black paint and varnish. Then you need to make a nose owl, rolling a small neat beak.

We proceed to modeling the wings, for this, roll a small sausage, slightly flatten and cut in half. Then, with the cropped side, attach our wings to the body of the bird, near the shoulders. Then you need to slightly bend, giving them a shape and smoothing the seams with your hands or tool. Also, if desired, you can make owl and tail.

You will certainly get a beautiful owl made of polymer clay. A master class with a step-by-step photo will reveal the phased implementation. This is quite simple and easy to do in its performance modeling.

We take plastic, it is well kneaded and rolled out with a rolling pin or a special machine. Carefully cut out the desired shape of an owl, circle or oval. Again roll out the clay of a different color and squeeze out two mugs with a cap from the handle. Make the eye sockets as close to each other as possible on the surface of the workpiece. Then roll the sausage one more piece of plasticine, pressing down on one side along the entire length to get a teardrop-shaped cut.

It remains only to cut into thin sections to create the wings of an owl. They need to be laid out on the sides.

Next, make a nose, we sculpt a small droplet and lay under the eye socket, using a needle to make two indentations - the nostrils. We form the legs of an owl, roll six balls, three on each foot. It remains to roll two small balls for modeling pupils. The toothpick rib can make transverse furrows and incisions for texture. Your owl of polymer clay is ready!

Decoration and painting

The resulting product can be painted with a brush or a sponge with acrylic paints and varnished. With the help of a toothpick or other tool, you can make an invoice carefully drawing the tail feathers of the wings and trunk of the owl.

It is noteworthy that the polymer can be mixed together to obtain the desired shade. You can use the standard owl color, using the white, brown, beige, orange and gold colors of the clay. Your owl can be brightly colored, then you will need brighter colors of plasticine. The choice, of course, will depend on your taste, mood and imagination.

Necessary tools and materials

For work you will need a clean work surface or a white sheet of paper, a rolling pin or plastic, a needle, a toothpick, a sponge or a cotton sponge, a brush, a matt lacquer for clay, acrylic paints and a ballpoint pen.

Owl made of polymer clay will come from any clay. Of course, the best material is Fimo or Cernit. In addition, you can use a more inexpensive clay. You can take "Tsvetik", "Sonnet" and "Artifact".

Some recommendations

Before using plastic, it is desirable to stretch it well in the hands. Or if you have plastic, skip several times through it.
Bake is necessary at standard temperature, it will depend directly on the brand of polymer clay you have chosen. And the temperature of baking varies from 110 to 130 degrees Celsius, with an approximate time from 15 minutes to an hour. After baking, let the product cool down.

An owl made by own hands is the best gift!

Owl made of polymer clay can have any size, shape and color. Of course, all this will depend only on your desire. And you can not only decorate your interior, but also use a pendant, a bracelet, a refrigerator magnet, a cup stand or a photo frame. It is possible to make a sort of small souvenir and present it as a gift to your family and friends.