On a laptop strip on the screen, what to do?

Lately, a lot of complaints have come to the appearance of a variety of bands on the laptop screen. What is the reason for this phenomenon, how to avoid it, what to do if there are stripes on the laptop screen? Answers to all these questions and many others you will find in the article.

Computer and laptop: diagnosis of the cause

Many people know that it is easier to determine the cause of this or that breakdown on a personal computer than on a laptop. This is directly related to the fact that the laptop is a one-piece design, and the computer has separate elements, which is difficult to call a minus. But at the same time laptops are much more popular because of their compactness. And that's why they break more often. One of the most unpleasant problems of a laptop is the appearance of bands on the screen. Especially it is unpleasant, when with a laptop you address very carefully, but here is such a ridiculous situation. Today, we'll look at all the ways to solve such a problem and understand what you need to do if the laptop has stripes on the screen.

How it all starts

Most often on the laptop screen appears one small strip of some color. The owner of the laptop does not pay attention to this, but this can not be left alone. In the first days, a maximum of three strips appear on the screen (green, red or blue), but within a week the horizontal or vertical bands begin to actively reproduce. And only then the user understands that something is wrong. Some people manage to fix it for a few minutes by clicking on the matrix of the laptop screen (exactly to the place where the strips were). After a couple of minutes, the problem is returned, but there is simply no solution.

Causes

Vertical or horizontal stripes on the laptop screen may appear for several reasons, which will be discussed below. The reasons are as follows:

• Breakdown of the video card of the personal computer (in certain cases it is possible to repair the element or completely replace it);
• Damage to the motherboard (most often due to overheating);
• Breakdown matrix laptop (will have to make a complete replacement);
• Various damages (bad contact, breakdown and other problems with the loop).

Breakable components of the laptop can always be repaired, both with their own hands, and with the help of a variety of companies engaged in such activities as laptop repair.

Diagnostics

To narrow the search for a problem, it is recommended that you make an independent diagnosis of the laptop at home. Observe all the points listed below.

1. We connect an external monitor to our laptop to check if the graphics card is in blame, and if everything is fine with it. If the image on the connected monitor corresponds to the fact that on the laptop screen, probably, the problem is not in the video card. If there is no problem on the second screen, and the situation is the same on the laptop, everything is fine with the video card, the problem is in something else.
2. If the first situation did not suit you, and you did not identify the problem, we can proceed to verification number two. It is necessary to test the matrix on pressing or bending. In case if you click on a specific place where there appeared, for example, a white bar on the laptop screen, the image changes a little, most likely the problem is in the matrix or directly connected to the PC screen by the cable.
3. When closing / opening the laptop, the image changes? The problem lies in the trail (poor-quality contact or breakage of tracks).

Plane of the matrix

If there were multi-colored stripes on the laptop screen, most likely, the problem is in the loop of the laptop matrix. It is important to note that the bands do not affect the operation of the computer in any way, just a little boring. You can get rid of them only in one way - by replacing the loop. It is almost impossible to do this on your own (there is a high probability that you will only aggravate everything), so it's better to turn to professionals who will do everything at the highest level. Repair laptops - not the best occupation for non-professionals. In this case, you can spoil not only the laptop, but also your nerves, and also lose a lot of time.

Check again. When the laptop screen is tilted, the bars in the other part of the screen should appear. If this happens, then the problem is exactly in the matrix loop of the PC.

Multi-colored stripes on laptop display

What should I do if there are vertical bars all around the screen? You will now find out the answer to this question. Often the bands are red and blue, for some time they become much larger (increase in width and length). Multicolored stripes on the screen are ways to change your color to another - white. If you are not sure what the problem is, better perform a self-diagnosis, which is detailed in a little higher. If an external monitor connects strips on it, too, there is a problem with the graphics card. The models of laptops are divided into two types: those in which the video adapter is installed in the motherboard, as well as those in which the video chip is a separate module of the personal computer.

In most cases, only the replacement of a video card can help solve this problem , but it is better to contact the specialists so that they try to fix it. It will cost several times cheaper.

Monitor ripples

The ripples of this or that color on the laptop display proves that the problem is really in the loop. But in order to fully verify this, it will be necessary to conduct again the diagnosis. If everything is in perfect order on the external monitor, the problem is exactly the fault of the loop or the matrix of the personal computer. You should contact the repair professionals to replace the necessary parts to continue the work of the laptop.

It is often possible to find a problem when a person recently took his laptop from repair, where it carried it, so that the masters repaired the loop or matrix, but after a while it again charged on the monitor.

This, in turn, is associated with a poor-quality contact between the motherboard and the video adapter of your laptop. In such a situation, you should do a chip reboiling, or replace the motherboard completely or partially (you need to consult with the master to which you are applying for help). Do you have a band on the laptop screen? What do you do not know? Nothing helps? Continue reading the article - you are sure to find the cause of the appearance of the bands on the monitor and will be able to solve this problem!

Multicolored lines

The appearance of lines that randomly move across the monitor and constantly change their colors, proves the fact that the problem is the failure of the loop. A little bit above, it was already a question of this problem, however, as you understand, this so widespread trouble already has a lot of "modifications". When is the problem in the matrix loop?

1. You turned off your laptop, there were no bands, and next morning you turn it on again, but there are already strips. This is a sign of a problem with the matrix or the cable.
2. The monitor not only flickers and changes colors, but also becomes negative (the image on the screen is sometimes served in the negative). This is the last stage of the failure of the plume of a personal computer or its matrix.
3. The image is only on one half of the screen, the second is simply empty. The problem with the matrix, which should be decided before the monitor turns off completely.
4. The non-working illumination of the laptop indicates that in the near future it is necessary to replace the matrix module-inverter.

Single violation of the system

If there are stripes on the laptop on the screen, this may not mean that the problem really exists as such. The case may be in a single work failure. Masters are often addressed by people who are sure that their laptop is broken (something with a matrix or video card), due to the fact that there was, for example, a black bar on the laptop screen. But this in no way proves the need for urgent repairs. There were situations when a small blue strip appeared on the screen (it was not even, but chaotically moved). It was on the screen this "trick" about a week, and no one paid attention to it. At first it seemed that the strip was getting larger, but after five days it became clear that it did not increase in length or width. After two days the strip disappeared and never appeared again.

It is because of this that it is better to wait a week or two to make sure that this is really a problem, and not to pay money to the masters who repair a laptop for a day, and he will again "cover up" in a month. But if the problem is not solved, then you can already go to the technical center, where you will find the right master.

PC Drivers

Often there are situations where a variety of colors and sizes appear on the laptop screen. Many immediately go to the service center to have the masters repaired the laptop. But is it always right?

Often the reason for the appearance on the monitor of your personal computer (laptop) bands are incorrectly installed drivers or even their absence. Also the source of the problem may be the articles of the outdated version of the software. Here everything is quite clear: you need to reinstall the driver. It is required to choose a version in which the problem disappears on the screen. How to do it? Only "by poke." Please note: download drivers for the laptop from the official website of the manufacturer of your model. You can install them and using various programs, but it's better not to take risks and do everything by the rules.

Sometimes a laptop comes with a laptop and all the necessary drivers. If you have one, of course, you can use it, but remember that the content on it is not updated. But try it, because the problem can be and simply in the failure of the laptop drivers. If you have already tried all the updates, most likely the problem is in other node elements of the device.

Summarize

If there are incomprehensible stripes on your personal computer, it is not necessary to immediately run to the masters. You can try to find out for yourself the cause of the accident, which is quite possible to eliminate yourself.

The cause of the failure can be both problems with the video card, and with the loop of the matrix. In certain situations it will have to be replaced, but someone is lucky - it's enough to fix it. Drivers often become a problem with the appearance of a variety of stripes on the screen of a laptop. Update the software to the latest version, and if this does not help, contact the specialists. Or do try to diagnose the PC yourself, which is described a little higher.

What to do if there are stripes on the laptop on the screen? What are the reasons for what happened? Most likely, you have already found the answers to these questions, but if this did not happen, you should immediately contact the specialists. They will review your laptop individually, will be able to accurately name the reason and designate the time needed for repair. And you will be convinced that the reason for the breakdown was before your eyes, just in a more open form. On the laptop strip on the screen? This is no longer a problem!