Laminate on the ceiling: photo of interiors. How to fix a laminate on the ceiling?

Laminate is a fairly practical material that is used for interior decoration of premises. People are accustomed to seeing it as a floor finish for various purposes. However, in recent years, the technology has widely spread, which provides for the installation of this material on the surface of the ceiling. As a result, it is possible to create an attractive and unique interior design, which is distinguished by coziness and comfort.

Such a ceiling for a long time will retain a pristine attractive appearance, in addition, it does not dust at all and is cheaper in comparison with the finish of the lining. The latter is appreciated by those who wish to save money when carrying out repairs.

The method of carrying out the work is very simple, with the work will be able to cope with any master who at least once in his life held a hammer in his hands. The ceiling lined with laminate, further insulates the room, which is especially important for cases where foam plates are placed in the cells of the lath. Whereas grooves are required to be filled with mounting foam. This measure eliminates the accumulation of condensate in the cavities of the crate. Dampings of such a system can be feared only if a leak occurs from above.

Why choose a laminate?

Laminate today has become quite widespread among modern consumers for the reason that it is longevous and does not require the need for repairs during operation. This is only true if the conditions for using the coating are met, and the installation work is carried out according to all the rules. Using a wide choice, you can buy panels with different colors and texture, which will suit almost any interior.

Council of the master

Laminate on the ceiling looks very attractive. If you also decided to decorate the room with this trim, it is important to make sure that the roofing is made of modern materials and is reliable. It is not recommended to repair this technology if your apartment is on the top floor of the house, and the roof is made of roofing material.

Hammer for a hammer

If you want to see a laminate on the ceiling of one of the rooms of your apartment or house, you can make the installation work yourself. To do this, use a hammer under the hammer, which will allow the skin to be completed in a short time. Using it, hammering nails is much easier. Such tools are made by the master independently, you can use a punch for this, if you do not have one, you can use an 8 mm metal rod. One end of it with an emery circle should be sharpened on a truncated cone, it does not need to be even. At its end, you should form a patch of 4 millimeters.

After cutting the wooden block, it is necessary to drill a hole under the bar so that the workpiece does not hang in it. It is important to produce these works in such a way that the element in the wooden handle had to be pounded with a hammer. In the hole, the workpiece is pushed up with a pencil. In the central part of the last one, you need to make a mark for the drill bit, and afterwards on the machine or a drill at a small speed it is necessary to drill a hole 0.5 millimeters smaller than the pin itself. Under the head of the nail should drill a small hole. If you are using a punch, then it will be much easier to perform these operations, remove the point on the emery, and then drill the hole, as described above.

With the help of such a tool, the nail can be hammered into the blind hole to the end. If you tilt the barrel, then the fasteners can be driven completely. However, before use, the fasteners are driven in 2/3. To make the laminate on the ceiling look the most aesthetically pleasing, it is very convenient to use a boom, which is useful for other work at home. If we compare the work where fixing the panels of the tongue-and-groove laminate to the dowel system uses staples, with the clayers fastened to the lags with the help of nails and striker, then the latter technology will be simpler.

Preparation for work

Laminate on the ceiling will look great if you do the right preparatory work. The plaster is removed if its layers are swollen, and the thickness is more than 6 millimeters. Next, you can start calculating the distance between the elements of the trolley, taking into account the size of the existing laminate. Sheathing rails can have a thickness of 15 millimeters. For a width of 30 millimeters you need to equip the crate, so that the edge of each panel falls on the central part of the frame system element. In this case, the dimensions of one cell should be 500x500 mm.

The cells of the lath do not necessarily have to be square, they can be rectangular. On the perimeter of the ceiling is laid rake, the width of which is 50 millimeters. If the ceiling is made of concrete, and the wiring is laid in between the slabs, the system should be left untouched. If the wiring is covered with plaster, and after removing it, the wires are outside, then they should be covered with small plastic boxes, which every 12 centimeters are strengthened with drops of building silicone.

Final stage of preparation

The ceiling can be finished with laminate only after preparation. At this stage it will be necessary to produce a marking of the future system of the pavement with a pencil, then holes for mounting nails with a diameter of 4 millimeters are drilled. The distance between the fasteners can vary from 400 to 600 millimeters. The length of the nails should be calculated as follows: 30 millimeters should be added to the thickness of the rails of the crate.

Creation of the system of a doorman

If you do not know how the laminate will look on the ceiling, photo interiors can be considered in the article. Only after that it is recommended to start work. At the next stage, it is possible to begin fixing the elements of the crate. To begin with, lags are laid. Close to the row of holes, you need to attach a rail, on which marks are made. The element goes down to drill the holes under the nails. Next, the workpiece rises to the ceiling, and the nails can be hammered to the finish. After the logs have been strengthened, it is possible to fill the cross-members, to lay the wiring in the elements of the lath, it will be possible to cut through the grooves in the groove.

Installation of laminate

Laying the laminate on the ceiling is carried out in the next stage. At the same time, it is necessary to retreat along the entire perimeter of 20 millimeters, for this purpose wide rails along the edges are used. No room is not protected from dampening, it happens exactly from the ceiling. Finish material from the effect of moisture can swell, it has nowhere to go to the side, crevices will start to appear. Fastening of the laminate on the ceiling can be done in many ways, if it is a plank board, then you can use knitters or small nails that are installed obliquely into the groove of the tongue. You need to do this before installing the next panel. If you decide to make a ceiling coating with a laminate that has a simple edge, you can use small nails, setting them every 25 centimeters, receding a quarter of the width of the rail from the edge.

Places for installing fasteners should be marked in advance on the floor, nails are driven into the thickness of the panel. Make this work a canopy will be much more difficult. On the spot, the nails are flush. A few days later, when the hats turn dark, they will no longer be visible. If you are thinking about how to fix a laminate on the ceiling, then before installing the next panel it is recommended to lubricate the corresponding sections of the grid with liquid nails, you can use mounting glue on wood, in the composition of which wood sawdust is added. With the help of it it will be possible to blur seams, if imitation of beams is not provided. When the laminate is laid on the ceiling in a wooden house, liquid nails should be picked up on the speck of the sample on the lid of the jar.

Recommendations for work

As another way of fixing the laminate to the ceiling surface is the installation of supporting wooden beams. If we take into account the fact that small nails will be invisible, the method described above is more advantageous. When the ceiling is supposed to install beams with lamps, under them, lead the wiring through the holes in the panels of the skin. For this purpose, it is possible to use notches along their edges.

Final work

Laminate on the ceiling in the bathroom is established quite rarely, but if you decide to resort to this method, you should choose a moisture-repellent material. At the final stage, the perimeter of the room is decorated with skirting boards. These elements are installed with the help of liquid nails, for skirting it will be enough. The fixing heads in the holes must be sealed with liquid nails or left as decorative elements.