KamAZ-53213: specifications, features, modifications

KamAZ is one of the main Russian manufacturers of trucks. In its range - and ready-made models for different purposes, and chassis for various equipment. Among variants of the second type - KamAZ-53213. Technical characteristics, features and variants of it are considered further.

Features

This designation carries a cargo chassis, which is an extended version of the chassis 53211. Third-party plants install various economic, construction and other equipment on it. In addition, there is also a factory modification, which is an on-board cargo tractor. The following is the initial characteristic. KamAZ-53213 has the following parameters.

The length of the car is 8 m, width - 2.5 m, height - 2.962 m, wheelbase - 3.69 + 1.32 m, front track - 2.026 m, rear - 1.85 m, ground clearance - 285 mm. The curb weight is 7 tons, the full weight is 18.225 tons. With a load capacity of 11,075 tons, a load of 4.5 tons per front and 13.725 tons per rear axle is permissible.

KamAZ-53213 is able to overcome steep slopes up to 30% and accelerate to 80 km / h. The rotation diameter is 10 m. The volume of the tank is 250 liters.

There was a tropical modification of 532137.

Cabin

The car is equipped with a three-seater cabin located above the engine and tilting to provide access to it. It is fixed to the frame on the elastic suspension. Has a bed, sound and heat insulation, seat belt anchorages. The driver's seat KamAZ-53213 is sprung and is equipped with adjustments for weight, length and inclination of the backrest.

Engine

KamAZ-53213 was equipped with a diesel engine 8-cylinder V-shaped configuration of 10.85 liters KamAZ-740 in three versions:

• 740.11. The power of the atmospheric modification is 210 liters. from. At 2600 rpm, the torque is 637 Nm at 1500-1800 rpm.
• 7403.10 is equipped with a turbocharger, thanks to which it develops 260 liters. from. At 2600 rpm and 785 Nm at 1700 rpm.
• 740.11-240 is a version of the previous motor with other settings. As a result, its power is 240 liters. from. At 2200 rpm, the torque is 883 Nm at 1200-1600 rpm.

Transmission

KamAZ-52213 has a 5-speed manual gearbox with a 2-stage divider, thanks to which all the gears are 10, and a double-disk clutch. Two rear axles are leading. Interaxle differential lockable.

Chassis

The front suspension is dependent, on semi-elliptic springs with sliding rear ends and telescopic shock absorbers. Rear - balancing also on semi-elliptic springs, with sliding ends and 6 reactive rods. The steering mechanism of the structure is a screw with a ball-type rail, equipped with a hydraulic booster.

The car is equipped with a pneumatic brake system with drum mechanisms.

Wheels - diskless, 20-inch, with chamber pneumatic tires.

Modifications

As it was mentioned, in the original form do not use the car in question: KamAZ-53213 - chassis for various equipment. It is usually installed by third-party companies, although there is also a factory version. The list of options is very extensive for the KamAZ-53213. Technical characteristics, of course, are determined by the type of platform. Further, for an example, some modifications are considered.

KamAZ-53212

First of all, you should consider the factory option. As noted, this car is a flatbed tractor, designed for intercity transportation as part of road trains. Production started in 1979 and graduated in 2002. The machine is an extended version of KamAZ-5320, created on chassis 53211.

It is equipped with a metal body with folding rear and side boards and wooden flooring. Its length is 6.09 m, width - 2.42 m, height - 0.5 m. It is possible to install an awning that creates a cargo compartment with a volume of 32 m ³ .

The overall dimensions of the car are 8.53 m in length, 2.5 m in width, 2.83 m in height (by the cabin) or 3.8 m with awning. The front track is 2,026 m, the rear track is 1,855 m, the ground clearance is 280 mm. The curb weight is 8 tons, the full weight is 18.255 tons. The carrying capacity is 10 tons. In the first case, the front axle load is 3.525 tons, on the rear - 4.475 tons. On a fully loaded car, these values increase to 4.29 and 13.935 tons, respectively. In this case, it is capable of towing a trailer weighing up to 14 tons. In such a case, the mass of a laden truck is 32,225 tons. The car accelerates to 60 km / h in 40 seconds (90 seconds with a trailer), the maximum speed is 80 km / h. The braking distance from 60 km / h is 36.7 m (38.5 m with the trailer), the run-off from 50 km / h - 800 m. The car is able to overcome the rises up to 30%. At 60 km / h, he spends 100.4 km 24.4 liters of fuel, at 80 km / h - 31.5 liters. With a trailer, these figures increase to 33 and 44.8 liters, respectively. The overall turning radius is 9.8 m.

There is an export (532126), a tropical (53127) and a northern (532121) version.

Galician KS-4572A

The list of equipment that can be installed on the chassis under consideration includes cranes. This model is designed for construction and loading and unloading operations. This device with a hydraulic drive has an arrow with a variable range from 9.7 to 21.7 m in length. The crane, therefore, is able to lift to a suitable height loads of up to 16 tons weight is 20.6 tons.

This truck crane KamAZ-53213 in transport position has a length of 12 m, a width of 2.5 m, a height of 3.55 m.

ATA 100-0.4 / 30

This machine is an aerodrome electric heat generator, which serves to provide electric power to air equipment, their conditioning and electric start-up. For this, it supplies three-phase and single-phase alternating and direct current and air.

Its length is 9.5 m, width - 2.55 m, height - 3.1 m, weight - up to 17 tons. The maximum speed is 50 km / h.

AKP-30

This is a car lift, used in fire fighting units. It is capable of lifting loads of up to 350 kg in weight up to 30 m.

The dimensions of the vehicle in the transport position are 14.5 m in length, 2.5 m in width, 3.7 m in height. Weight - up to 19.5 tons.

AP-5

This machine is also a firefighter, which is a car powder extinguishing. It is capable of neutralizing the burning of liquids, metals, gases and electrical installations in fires of all classes. The machine can hold 5 tons of powder and 10 air cylinders for spraying it manually (at 4 kg / s) and a gun barrel (at 30 kg / s to 30 m).

The dimensions of the car are 8.8 m in length, 2.5 m in width and 3.35 m in height. The total mass is 17.5 tons. The maximum speed is 70 km / h.