Impregnation for the bath: how to choose?

Correctly chosen impregnation for a bath is very important. Why is it needed and how to choose it? Read in this article.

Why do we need impregnation for a bath?

To the tree does not lose its properties, it must be processed. This is relevant for the lining, blockhouse, imitation of the beam and other materials. For processing, you can use a patchwork wax. In the composition of the product only natural components, incl. Propolis, beeswax and turpentine turpentine. Wax protects the surface from the harmful effects of fungus, moisture, UV rays and other harmful factors. Also, the product gives the surface an exquisite honey color.

Impregnation for baths and saunas is needed to protect the wood from temperature changes, as a result of which the surface can "burn out" and lose its original color. Therefore, in the steam room, trimmed with cedar, aspen or linden, it is necessary to carry out surface treatment. This will prolong the life of the wood and preserve its aesthetic appearance.

Impregnation should also provide antiseptic properties, protection from the formation of mold and putrefaction. The drug prevents the development of fungi that color and destroy the tree, repels insects. Antiseptic impregnation does not form a film on the surface and does not prevent the wood from "breathing". In this case, the antiseptic is able to protect the wood even if the lesion has already begun.

Facade structures must be made exclusively of dry material. When drying, the wood crackles and warps. If the humidity increases, the material may swell. Therefore, treatment with moisture-proofing agents is important.

How is the impregnation applied to the bath?

The mechanical treatment of wood must be fully completed by the time of impregnation. After application of the agent, the treatment is allowed with the subsequent three-fold application of the solution on the bare surface.

Wood needs to be pre-prepared. After you applied the wax to the surface, you need to immediately pierce the steam room. Then the wax, thanks to the action of turpentine turpentine, absorbs into the tree as deeply as possible. After 24 hours, the impregnation can be applied again, so that a honey-colored shade appears on the surface and it becomes glossy. To rub the walled walls, shelves and ceiling is not necessary. Due to the influence of high temperatures, the agent will be uniformly distributed over the entire area.

Impregnation for floor bath

The agent that you put on the floor should not make the surface slippery. To give beauty and natural appearance, it is necessary to use impregnation that does not contain harmful substances. Otherwise, under the influence of high temperatures, these components can stand out and cause harm to your health. Impregnation for a bath is not a means to save. Otherwise, the tree will quickly lose its beauty and begin to deteriorate. Correctly processed surface will serve you for many years and will please you both with its kind and useful properties.