How to weave the key ring from the rubber bands on the machine and without the machine?

Crafts made of rubber bands for the weaving have recently won their place among the already familiar items of everyday use. Often you can see on the girls dresses, swimsuits of colored rubber or all kinds of accessories: from the umbrella to the evening bag. And how nice it is to receive as a gift a small souvenir woven with your own hands: a bracelet decorated with various figures, a ring with a woven bead, but a young man can give a keychain from the house or from the car.

How to weave a key ring from elastic bands? Start

First it is necessary to determine the color of the rubber bands for weaving. Bright and juicy tones are more suitable for girls, but a young man should choose a calm color - blue, white, black, dark green and so on.

First, let's see how to weave the key chains from the rubber bands on the machine. We take 20 red and seven green rubber bands - the key chain will be made in the form of a strawberry. Two green rubber bands are put on the first columns of the center and the far row. The second pair is the same, but on the near and central row. We put two red rubber bands on the first two columns of the far row, then also on the second and third. The same is done with the central and the first, the second column of the near row. Two more gums from the second column of the near row we throw on the third central. Two red - on the third and fourth columns of the center, two more - on the fourth column of the center and the third column of the long row. Again, we put two red ones on the second columns of all the rows. Another twist on the hook with an eight, put on the third columns of the center and the far row. The last red twist three times and put on the last column with red elastic bands.

Stage Two

We look further, how to weave a keyring in the form of a strawberry from the elastic band. We twist the green rubber band twice and put it on the first row of the near row. The same is done with the far first post. From the fourth column of the center we remove elastic bands, which are stretched from the third column of the far row, and we throw on it. The same we do with elastic bands from the third column of the center, and afterwards we remove the rubber bands from the second column of the nearest row (we put on it). Also we arrive with elastic bands of the second column of the center. Next, remove the gum from the second column from the third column of the far row and throw it on him. Similarly we do with elastic bands from the first columns of all rows. From the first column of the near row, remove the green rubber band and put it on the first column of the center. From the far away we also throw it on the center. We lower the hook into the central first column and from the bottom on it we put on the last green elastic band, having brought its ends from above and tightened a loop. Gently remove all the gum from the machine, not letting go of the green. The strawberry is ready!

If there is no machine

If you do not have a machine, do not get upset. Next, we learn how to weave a keychain out of rubber bands without a machine. This will require a hook, a fork, an iron ring and rubber bands of several colors (eight pieces each).

The first gum (for example, gray) is put on top of eight with a slingshot, four white ones - on the right and on the left side. On top - the next eight-shaped gray rubber band, the bottom hooked through the crochet through the white and throw off into the middle. The same is done with the second party. We add four different gums of different color to the rogatina, then again the eight gray ones and then we do everything the same as in the first case. When all the colors are on the spear, we put on another gray gum on top, drop the previous gray one on it, and then shoot it with the right rogatina and throw it on the left. The two ends of the gray rubber band with the left rogatina are worn on an iron ring and we remove the finished keychain from the rogatina. So, we learned how to weave a key ring from rubber bands on the forks.

Getting acquainted with the slingshot

In fact, there is nothing difficult to work with this tool. How to weave a key ring from rubber bands on a slingshot? Yes, as well as on the fork. According to the previous technology, the rubber bands are alternately thrown into the center with each side of the rogatina, fixed with one or two elastic bands, put on both ends of the tool. At the discretion already woven pair of rubber bands can also be thrown not only into the center, but periodically removing them from one end of the slingshot and throwing them to the second end. Then the weaving will be a little more complicated, and the key chain itself will turn out to be more interesting. By the way, the previous sample keyfob can also be weaved not with a fork, but with the help of a slingshot. The only difference between how to weave a trinket from the rubber bands on the slingshot, and how to weave it on the fork - in the second case, the tool is bigger in size, and therefore, more rubberies can be used in the weave.

How to make an unusual charm?

You can make a multifunction keychain. We already know how to weave a keychain out of rubber bands without a machine, and you can replace the slingshot or fork with your fingers.

And this means that the keychain can be made anywhere and anytime. For example, using the above technology of weaving a simple keyring on a fork, you can weave an ordinary bracelet, using in it an absolutely different number of colors. To connect such a bracelet is best with two plastic clips, for reliability tightly tightening the final rubber bands at their ends. Or it is better to use a small ring - at least from plastic, though iron. In this case, one end of the bracelet can be thrown off the clip or ring, eventually turning the bracelet into a simple key chain.

If you need several key fobs

How to weave the trinkets from the rubber bands, so they are exactly the same? And most importantly, how to do it quickly? Suppose you need to make several keyrings for friends, but so that they are no different.

We take the hook and put on its handle fifty of the rubberies of the same color, and then the same, but different. It seems that now is the most difficult moment, because we already know how to weave a trinket made of rubber bands (we throw, fold, transfer, spin). But not in this case. Here we prepare the most simple souvenir - a keychain-flower. Through a hundred put on the handle of the rubber we just drag one, which we firmly grip on both sides. You can change the keychain in the third color (by taking 33 gum) or putting them on one. Such a sun-flower will certainly please anyone.

What other ideas can there be?

If you add a little imagination to the already familiar work, you will get a completely different result. For example, how to weave a trinket made of rubber bands so that it differs from others with its originality? Yes, it's very simple.

For example, take and flatter the top of the key. Such a keychain will protect the key from scratches, and hands - from touching the cold metal. How to weave the trinkets from the rubber bands in such a way that the recipient was satisfied, you can tell a very long time. Beginning with the braiding of the upper part of the key and ending with a cover for the alarm panel - there would be a desire to fantasize and embody fantasies in reality. It is worth adding a pair of eye-beads, a nose and a smile to a simple braid - and such a key chain will certainly raise the mood to its owner.

Finally

How to weave a key chain from rubber bands, we learned. In principle, nothing complicated. The main thing - be patient and not in any case take the time. But there are several other important criteria. Erasers should be selected high-quality, because if you accidentally pull it somewhere, the defective ones will just break, spoiling the whole previous work. Do not throw the job halfway: then it will be really difficult to remember from which column or edge you finished the weaving, and remembering step by step the whole process will not be easy.

You can not go too far with the color scheme, it is worth learning that the tones should gently flow into each other, only then the product will not seem too bright and annoying, instead of bringing joy. And, of course, you must always remember who this keychain will be designed for. Such thoughts will help make the work better and more interesting.