How to tie a tie for a wedding? Tie for the groom: ways and rules

The groom does not have such a large selection of outfits for a wedding, like a bride. An originally tied necktie can be a highlight in the suit of a future husband and a getter.

How to tie a tie for a groom's wedding

Tying a tie is a real art, it is recommended to master it to both gentlemen and ladies.

What are the ways to help a man not only correctly tie the necessary wedding attribute, but also to choose the right tie for the wedding?

A simple node "4 in hand"

This is an asymmetric knot, it has an irregular triangular shape, more like a cone. The wide end of the tie on the right is superimposed on the narrow, coil behind, then from the front - and it remains only to pass it through the formed loop, pull the thick end down, then to the left and lift the bundle over the loop.

Double knot "Prince Albert"

This method is relevant for simple long ties. The name was received because of double tying.

In fact, this is the same usual way of tying "4 in hand", only with an additional turn around the narrow part of the tie. The knot becomes more bulky, it is fitting on a high collar. If you tie a tie for a wedding this method, you can achieve a spectacular appearance. It looks very elegant.

Eastern knot

It also has the names "Red", "Small knot" or "Oriental". Suitable for heavy neckties. It is tied up simpler than a simple node. The narrow end of the product is placed over the wide, then wide - around the narrow and fits to the left. Through the neck loop, the wide end of the back of the node is held, then it is once again looped through from top to bottom. It seems that this method is really the easiest. However, it is unlikely that it will be possible to tie the tie off the first try. You need to train, starting with the node "4 in hand".

Windsor Knot

Such a tie for the groom is designed for shirts with a wide collar in the formal business style.

This is a three-dimensional node. You can achieve the required size by changing ties with different widths or by varying the ends of a conventional tie to the site of the knot.

Node "Half-scan"

Suitable for any tie of silk or light-weight fabric, the collar should be with widely dilated corners, possibly attached with buttons to the shirt. This is the so-called "open" collar. The principle of tying is similar to Windsor, but the knot turns out to be less voluminous and with a dimple under it, which gives a piquancy to the whole image.

Node Pratt or Shelby

The knot has a double name, since there are still disputes over who owns the idea of its creation - either to the American Jerry Pratt or the European Don Shelby. The way of tying is similar to the "Windsor" and also requires space for its volume, which is achieved by the very tie with the filler.

The Hannover assembly

This is a symmetric node. In form - triangular. Ideal for the widest possible collar. In size, it is larger than the "Windsor" node. Two nuances at tying: the tie is superimposed by the seam outside, and the wide end remains longer than the narrow one. The principle of tying is in double overlapping, due to what the desired volume is achieved.

Onassis Assembly

The starting position is a simple knot. Then you need to take the wide end of the tie to the right side and toss it across the entire assembly. You do not need to pull it. Let it hang freely.

Thus, the unit itself seems to be hiding from prying eyes. Smoretsya unusual. The method is named after Aristotle Onassis, a millionaire, owner of ships and steamships, a man who possessed the style and knew how to properly wear a man's tie. At the wedding, a tie tied in this way will be a perfect addition to the general image.

Knot "New Classic"

It is also based on a simple way to tie a tie. The difference is in the final touch. Before you tuck the wide side of the tie into the knot, you need to wrap the sides of this side on both sides, then refill it, as in a simple knot. It turns out rather unusual. Before you tie a tie to a wedding in this way, it is worth picking a shirt of silk.

Freestyle knot

If you own a simple knot and Windsor, it's not worth it to tie up and Freestyle. The knot is very elegant, light in technique. Perfectly looks on ties made of silk with filler.

Node "Balthus"

This is the largest knot of all available.

In order to determine how to tie a tie for a wedding in this way, pay attention to the length of the product. The principle of tying is complicated, and the beginner can not cope with it.

The node "Christensen" ("Square", "Italian")

At first, in the 19th century, the Christensen knot was designed for ties that were equally wide along the entire length. Thought its manufacturer of ties in Europe Amanda Christensen. Today this knot is relevant for all long ties. Ideally, it should be a woolen or cashmere tie on a shirt with a high collar. Knowing how the Windsor node is running, you can master this method by making two more turns in the front.

Nuances in choosing a tie for the groom

Before you tie a tie for a wedding, you need to consider all the subtleties of the costume, as well as the figures of the groom:

1. Men of medium height and tall, of ordinary build, fit any tie. A tall, lean figure is wide or with a large pattern, a tall large man has a wide tie with a large pattern, and a man should wear ties with a vertical strip or a small pattern in the body.
2. The tie should match the color of the suit: monochrome ties fit for costumes with ornaments and geometry, light and bright - to dark suits. Dark is worn only with a light shirt and contrasting with a dark suit, and if the groom's suit is traditionally light, then the tie is selected in tone. The tone should be different: either lighter or darker.
3. The tie must match the accessories of the bride.
4. The length of the tied tie should be either just above the strap on the trousers, or the end of the tie should half cover the buckle.
5. The tie should look harmonious either with a handkerchief in the pocket, or with the groom's buttonhole.
6. Material for a wedding tie can be different, the main principle - nobility. It is better to choose silk or jacquard.

Whichever tie the bride chooses, no matter how he tied it, it is important that the whole suit looks harmonious.

Conclusion

Before you tie a tie for a wedding, it is necessary to determine the general style and manner. In turn, an important role is played by the shirt, too, since if it is thin and airy with a short collar, then heavy ties do not exactly fit. And, of course, it's important to remember the style of the bride's dress.