How to remove pedals from a bicycle: a practical guide

Removal of the pedals from the bike may be required when there is a crunching, knocking, other unpleasant situations while driving. Eliminating such problems is difficult. However, once figuring out how to remove pedals from a bicycle, you can make their regular maintenance, without resorting to the services of specialists.

Walking on a two-wheeled transport is beneficial for your well-being. But at the same time, muscles of the shoulder girdle are practically not involved. Perhaps this is what drove the developers to invent a bicycle with pedals on the steering wheel. In addition to a uniform load on almost all the muscles of the body, you can move on such transport at a more impressive speed. Owners of such "iron" horses should also figure out how to remove the pedals from the bike.

Construction of pedals

This part is an element of the system, which consists of a set of stars, pair of connecting rods, carriage, axle, bearings, support platform and accessories. To better understand how to remove pedals from a bicycle, let's look at each spare part separately.

1. Axle - a metal pin built into the connecting rod. It acts as the base on which the remaining elements of the structure are held.
2. The connecting rod is a part that is connected to the axis on one side, and on the other hand to a freely rotating platform.
3. Bearing assembly is a design that ensures a smooth running of the system.
4. The platform is a knot that acts as a support for the foot while moving and is connected to the shaft by means of a connecting rod.
5. Accessories - metal fasteners for fixing all components of the pedal unit. Completely dismantled during disassembly.

Types

According to the nature of the support platform, standard and contact pedals for a bicycle with fastening are distinguished. The first provide adhesion to the sole of the cyclist due to the invoice surface. The second contain notches, which are connected with the corresponding protrusions on special shoes.

From the type of platform depends largely on the way of dismantling. Contact mechanisms are more complex. Therefore, to remove them is somewhat more difficult compared to standard products.

There is also a combined version of the pedals. The latter contain an ordinary platform on one side of the platform, and a contact pad on the other.

Instruments

The following tools can be useful in the course of the work:

1. Manual key - allows you to get to the nuts and dismantle the connections.
2. Bicycle kit - acts as a universal solution when performing various repair procedures.
3. Horn key - suitable for dismantling pedals on almost all bike models.
4. A special key for the system - makes it possible to remove non-standard nuts.
5. Puller - is indispensable if you need to work with contact pedals. Allows you to lock the axis when using a manual key.

How do I remove the pedals from the bike?

First, you need to equip yourself with a bicycle key, long enough to create a suitable lever. The tool is placed in parallel with the connecting rod. The key rotates in the desired direction (for the right pedal - counterclockwise, for the left - for the hour).

The use of a special bicycle key will quickly unscrew the connections, pushing the lever with the whole body. If the pedals refuse to unscrew, in this case it is worth heating the connection point of the platform with the connecting rod using the burner. It should be borne in mind that heating is carried out with simultaneous cooling of the metal with water. Otherwise, there is a chance of final damage to the parts.

How to get the pedals back in place?

When starting the installation of pedals, it is necessary to clean the threads on the connecting joints of the connecting rods and platforms beforehand. Further, it is enough to take the right pedal and turn it clockwise. Screwing should first be done by hand, and then using a key. Finally, the pedal must be firmly tightened.

A similar operation is performed with the left platform and the connecting rod. In this case, only the rotation must take place in the opposite direction. Finally, once again tighten and securely fix the pedals with a manual key, which eliminates their arbitrary unscrewing while driving.

Eventually

As can be seen, it is quite easy to dismantle and reinstall the bicycle pedals. However, the process should be fully armed, taking care of the availability of all necessary tools and not forgetting about possible problems that may arise during the procedure.

In order not to puzzle yourself once again with the problems of removing and disassembling the construction of the pedals, it is enough to constantly maintain the functional unit in good condition, to make it regularly lubricated and cleaned of contaminants.