How to paste a film without bubbles on the phone: step-by-step instruction

Every user of a modern smartphone wants the gadget to work for a long time and does not lose its appearance. To preserve the smoothness of the screen, the phones are covered with a protective film, but it is not eternal, so sooner or later it will require replacement, but not everyone knows how to stick a film without bubbles on the phone. That the result does not upset you and there were no mistakes in the process of gluing the film, you need to know a few very important nuances.

Why do we need a film?

First of all, we need to understand what this film is for. Over time, any screen is covered with a layer of dust, small scratches, rubbed, fingerprints and the like appear. As a result, the phone becomes untidy, the contrast and brightness decrease, the sensitivity of the screen and the quality of the color renders deteriorate. Protective transparent film completely closes the screen of the tablet or smartphone, while the quality of work and the image does not change. For today this is the best protection against dirt and scratches, thanks to it also harmful UV light is not passed, the screen becomes more readable in bright sunlight and there are no glare, but you need to know how to paste a film without bubbles on the phone.

What will be required

First of all you need to choose a room where there is the least dust, it can even be a bathroom. For best effect, turn on the hot water so that the steam quickly precipitates the dust. Also take with you an ordinary plastic credit card, cloth and napkins without lint. Some smartphone users advise a terry towel. Now you can paste the protective film on the phone, especially not fearing that during the work the dust settles on the screen. And from this moment you can safely move on to the next stage.

General recommendations

Start the process of gluing the film immediately. To begin with, you need to prepare and stock up on the materials discussed above. Having dealt with where to paste the film on the phone, you need to remember a few important tips. With wet wipes, wipe the surface of the screen, as a result, some stains may remain, but stains should not be allowed. After that, the phone is wiped off with a towel, but it is better to use a cloth that is often sold together with a protective film. It is strictly forbidden to use alcohol-containing substances or cleaners. Also, you should not spit, breathe or blow on the screen - just a lint-free cloth and wet wipes.

Instructions

With this simple instruction, you will learn how to paste a film without bubbles on the phone:

1. Prepare materials, film, work place and wash your hands. Put a blank sheet, set good lighting.
2. Red sticker or number 1 marked the first layer of the film, which must be removed. The film is gradually applied to the phone from top to bottom.
3. The main stage, on which you need to thoroughly clean the screen, even from the smallest particles, because of which bubbles appear. For this, a silk cloth is used, which is sold complete with a film. Towels with small pile or cotton wool can not be used for this.
4. Stick the film, do not touch the sticky side with your fingers. Do everything unhurriedly, the fixed part smoothly smooth from the center to the edges. The film should not go beyond the screen.
5. After gluing all the irregularities can be smoothed by fingers or a card from the center to the sides, if necessary.
6. Number 2 or blue sticker marked the second layer, which must be removed at the end of the work. You can remove it immediately, but if you have little experience, then do not rush.

Now you know how to paste a film without bubbles on the phone. But there are still some tips that will help you in this difficult issue and make the work as simple as possible, fast and correct.

Types and types of films

It is necessary to understand that it is rather difficult to paste the film on the phone correctly the first time, especially to make sure that there are no bubbles. It is not easy to understand what is best to choose. Naturally, you can paste a universal film on the phone, but it does not always meet the requirements of users. It is better to choose some definite, but it is of four kinds:

1. Matte - without unnecessary problems allows you to view texts, as well as video, including with very strong sunlight or artificial light.
2. Glossy - the phone gets extra beauty, the look is greatly improved. But in bright sunlight or strong light, glare appears.
3. Mirror - made from special glass, the phone appears additional gloss and chic. Disadvantages are similar to glossy films. There are models for the back cover of the phone, which replace the cover, closing the smartphone on both sides.
4. Capable of clean peeling - qualitatively separated, does not leave glue. Has a very thin layer of silicone, perfectly adheres to the screen, leaves no traces, it is possible to paste many times.

Film Features

How to paste a film without bubbles on the phone - is not the main question. You still need to pick up the film itself, and it's better to buy exactly the one that is made specifically for your phone model. In general, its size is slightly less than the screen parameters - by 0.1-0.5 mm. This is done so that the edges of the film do not cling and do not lag behind the surface. If the film does not fall behind, then the garbage can not get under it, and the screen will remain clean, whole and without scratches.

In the event that you have purchased a large sheet of film, the size of which must be adjusted manually for a particular model, then you need to figure out how to cut the film on the phone correctly. It happens that the first time something does not work out - do not get upset, you just need to practice a little. If the film is glued crookedly, remove it, but do not tear it. Wash, dry it and start working again. Some masters, on the contrary, advise to pre-wet the film, shake it and only then start to glue, squeezing out the remains of water from under it.