HobbyNeedlework

How to make a fashionable bracelet by yourself: a master class

A fashionable bracelet is an indicator of the sense of style and taste of the owner. Such an accessory will complement any image and make it complete. The main thing is to choose the color and shape. After all, not every bracelet looks good at all. Therefore, you can do the most suitable thing for yourself with your own hands.

Fenugreek

The most fashionable bracelets now, which you can do with your own hands, is shamballa. Decide on the color that fits most wardrobe clothes and start choosing materials. What you need to work:

  • Three meters of waxed cord.
  • Ten beads.
  • Scissors.
  • Colorless nail polish.
  • Board and two nails. This is necessary for weaving. Hammer nails into the board at a distance of 30 centimeters from each other, the machine turned out. Also it can be purchased in the store for needlework.

This set of materials is suitable for beginner needlewomen. Having learned how to weave a usual shamballa bracelet, you will be able to master more sophisticated techniques.

How to make a bracelet

  1. To one nail tie the edge of the waxed cord.
  2. Pull it to another nail, leaving an additional five centimeters, cut it.
  3. String on it the existing beads in the necessary order, starting after ten centimeters from the nail.
  4. Well tighten the cord and tie it to the second nail.
  5. Cut off the 2.5 meter cord. Step back two centimeters from the nail and tie it through the center of the cut. That is, at the edges of the node should be the same length.
  6. It should be that the left side is sticking out higher from the node. From it we begin the weaving. Draw it under the main thread and above the right.
  7. The right part is held above the main and below the left.
  8. We tighten it. A node was obtained, which will be used throughout the work.
  9. If you did everything right, then the right side sticks out higher.
  10. Now the right segment passes under the main thread and above the left side.
  11. The left part is above the main and under the right cord.
  12. We tighten it. The plait for this plan is twenty knots.
  13. You almost learned how to weave a fashionable shamballa bracelet. Now add a bead to the usual node. We weave it.
  14. After the three basic nodes, there is another one with a bead.
  15. Continue doing this until the beads run out.
  16. Twist another fifteen base knots.
  17. Remove the bracelet from the machine. Stepping back five centimeters from the base knots, on the main cord weave two simple knots. Cut the rest.
  18. Lubricate the last knots with a prepared varnish.
  19. To make a comfortable adjustable buckle, you need to cover the edges of the main cord in a circle. The ends of the cords with the nodes are directed towards each other. Ropes, which did the main job, we make five basic knots.
  20. On the remaining cord, make simple knots, cut the remaining ones. Lubricate with varnish.

You learned how to make a simple version of the shamballa bracelet. Experiment with the diameter of the beads, colors and even the number of rows.

Fashion Trend

Fashionable women's bracelets are now very relevant. Do not be afraid of their large number, put on both hands, but make sure that accessories fit together in shape, texture or color. Use larger sizes. How to do it? It will take an ordinary plastic bottle for the base and an improvised material for decoration. It can be a fabric of different texture, crystals, threads, paint, varnishes, brooches.

Progress:

  1. Cut out of a plastic bottle a bracelet four centimeters wide.
  2. If the bottle is colored, and you are going to work with transparent material, then glue the base with paint tape.
  3. Take the cloth with the pattern that suits you. Cut the flap, which is one and a half centimeters larger than the base on each side.
  4. Cover them with a bracelet.
  5. To make the inside of the bracelet, use a paint tape.
  6. Cut another strip of fabric and glue it inside.
  7. Sew or glue beads, stones, rhinestones.

Very gently will look like a lace or guipure accessory. You do not need to add extra parts to it. This fashionable bracelet is noteworthy in that it requires minimal monetary and time costs. For each dress you can make your own unique decoration.

Ethnic style

What bracelets are fashionable for more than one season? In ethnostyle. They are easy to make from felt and matching to it on color of a thread a mulina. Usually used red, black, yellow, orange, burgundy, brown, white. As an example, take the felt of the last three colors and the appropriate thread.

Progress:

  1. Measure the circumference of the wrist and add three centimeters. This length should be the product.
  2. Draw on paper templates for circles. Two will be 4 centimeters in diameter, four by 3, they are used for the base. It will be visible only half, the others are necessary to hide the wrong side. And cut a few smaller circles for decoration.
  3. Embroider the pattern on the smallest details, attaching them to the middle ones. It can be stitches and zigzags.
  4. Now connect in the same way the middle parts with the largest.
  5. Collect the bracelet. The photo of the finished product will help in this. Fold together a pair of circles and connect with a decorative stitch.
  6. Fasten the parts to the sides.
  7. For the fastener you need two maroon rectangles and a white one. The latter is slightly shorter, make it a slot for the button
  8. Sew a button.

The work is over. You can come up with different variations of this bracelet, changing the shape of felt.

Polymer clay

Polymer clay is an excellent material for making a bracelet in ethnol. Here you can use any colors, patterns and shapes. For work you need stacks for plasticine and materials. Twist the strands, make circles, squares, semicircles, leaves. Try any size. The bracelets are thin, so you need to make them several and wear them together. The material is comfortable and pliable, it takes shape well, so it will not be difficult to work with it. It can harden in the oven or on its own.

Male Accessory

Fashionable men's bracelets, made with love with their own hands , will be a gift for a young man, friend or father from a girl. After all, the strong half is not fond of needlework. To make such a thing is possible by the technique already known to us, used in weaving bracelet shamballa. Just do not use beads. For men, a wider bracelet is suitable.

Materials:

  • Lace or rope. Counting should be like this: the centimeter of the bracelet is 13 centimeters of cord. That is, for a 20-centimeter wrist, you need 2.5 meters of material.
  • Scissors.
  • Buckle.
  • Lighter.

Progress:

  1. Tie the knot at one end of the buckle so that the same length of cord is on each side of it.
  2. In the second part of the buckle we pass the ends. A long cord with a man's wrist should be pulled.
  3. Fold the edges of the cord so that you can weave according to the principle of a shamballa bracelet.
  4. The left part of the lace is passed under the main threads and above the right side.
  5. Right thread above the main and below the left.
  6. Continue until you reach the second part of the buckle.
  7. With the ignition, solder the ends to the product.

Leather bracelet

To please your man, learn how to make fashionable bracelets with your own hands. MK in this will help. Take a piece of leather and a clerical knife. Progress:

  1. Cut out of the skin a rectangle 3 cm more than the required size of the product.
  2. Draw a picture with a stationery knife.
  3. Draw simple parallel lines, from them later we get an interlacing.
  4. Cut on the skin about a third of the thickness.
  5. Strips cut all over the depth.
  6. Twist them together and secure with a stick.
  7. Along the edges, punched holes for fastening.
  8. Put the bracelet on the jar for ease of use.
  9. When finished, boil the bracelet with the jar. At this point, the accessory will take the necessary shape, and the pattern will look like a thread. Cooking lasts three minutes.
  10. Cool the product, correct the defects. Wrap the protruding sides of the skin with a cloth.
  11. Polish the bracelet with sandpaper and cover with shoe cream of the right color.

Basic Techniques

The simple techniques described above will help you create a unique fashionable bracelet for yourself and your young man. If you are a creative person, who has time and a good imagination, then try to make an accessory yourself.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.